1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Rockchip RK3xxx I2C controller
8
9description:
10  This driver interfaces with the native I2C controller present in Rockchip
11  RK3xxx SoCs.
12
13allOf:
14  - $ref: /schemas/i2c/i2c-controller.yaml#
15
16maintainers:
17  - Heiko Stuebner <heiko@sntech.de>
18
19# Everything else is described in the common file
20properties:
21  compatible:
22    oneOf:
23      - const: rockchip,rv1108-i2c
24      - const: rockchip,rk3066-i2c
25      - const: rockchip,rk3188-i2c
26      - const: rockchip,rk3228-i2c
27      - const: rockchip,rk3288-i2c
28      - const: rockchip,rk3399-i2c
29      - items:
30          - enum:
31              - rockchip,rk3036-i2c
32              - rockchip,rk3368-i2c
33          - const: rockchip,rk3288-i2c
34      - items:
35          - enum:
36              - rockchip,px30-i2c
37              - rockchip,rk3308-i2c
38              - rockchip,rk3328-i2c
39          - const: rockchip,rk3399-i2c
40
41  reg:
42    maxItems: 1
43
44  interrupts:
45    maxItems: 1
46
47  clocks:
48    minItems: 1
49    items:
50      - description:
51          For older hardware (rk3066, rk3188, rk3228, rk3288)
52          there is one clock that is used both to derive the functional clock
53          for the device and as the bus clock.
54          For newer hardware (rk3399) this clock is used to derive
55          the functional clock
56      - description:
57          For newer hardware (rk3399) this is the bus clock
58
59  clock-names:
60    minItems: 1
61    items:
62      - const: i2c
63      - const: pclk
64
65  rockchip,grf:
66    $ref: /schemas/types.yaml#/definitions/phandle
67    description:
68      Required on RK3066, RK3188 the phandle of the syscon node for
69      the general register file (GRF)
70      On those SoCs an alias with the correct I2C bus ID
71      (bit offset in the GRF) is also required.
72
73  clock-frequency:
74    default: 100000
75    description:
76      SCL frequency to use (in Hz). If omitted, 100kHz is used.
77
78  i2c-scl-rising-time-ns:
79    default: 1000
80    description:
81      Number of nanoseconds the SCL signal takes to rise
82      (t(r) in I2C specification). If not specified this is assumed to be
83      the maximum the specification allows(1000 ns for Standard-mode,
84      300 ns for Fast-mode) which might cause slightly slower communication.
85
86  i2c-scl-falling-time-ns:
87    default: 300
88    description:
89      Number of nanoseconds the SCL signal takes to fall
90      (t(f) in the I2C specification). If not specified this is assumed to
91      be the maximum the specification allows (300 ns) which might cause
92      slightly slower communication.
93
94  i2c-sda-falling-time-ns:
95    default: 300
96    description:
97      Number of nanoseconds the SDA signal takes to fall
98      (t(f) in the I2C specification). If not specified we will use the SCL
99      value since they are the same in nearly all cases.
100
101required:
102  - compatible
103  - reg
104  - interrupts
105  - clocks
106  - clock-names
107
108if:
109  properties:
110    compatible:
111      contains:
112        enum:
113          - rockchip,rk3066-i2c
114          - rockchip,rk3188-i2c
115
116then:
117  required:
118    - rockchip,grf
119
120examples:
121  - |
122    #include <dt-bindings/clock/rk3188-cru-common.h>
123    #include <dt-bindings/interrupt-controller/arm-gic.h>
124    #include <dt-bindings/interrupt-controller/irq.h>
125    i2c0: i2c@2002d000 {
126      compatible = "rockchip,rk3188-i2c";
127      reg = <0x2002d000 0x1000>;
128      interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
129      clocks = <&cru PCLK_I2C0>;
130      clock-names = "i2c";
131      rockchip,grf = <&grf>;
132      i2c-scl-falling-time-ns = <100>;
133      i2c-scl-rising-time-ns = <800>;
134      #address-cells = <1>;
135      #size-cells = <0>;
136    };
137