1* NXP PNX I2C Controller
2
3Required properties:
4
5 - reg: Offset and length of the register set for the device
6 - compatible: should be "nxp,pnx-i2c"
7 - interrupts: configure one interrupt line
8 - #address-cells: always 1 (for i2c addresses)
9 - #size-cells: always 0
10 - interrupt-parent: the phandle for the interrupt controller that
11   services interrupts for this device.
12
13Optional properties:
14
15 - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
16
17Examples:
18
19	i2c1: i2c@400a0000 {
20		compatible = "nxp,pnx-i2c";
21		reg = <0x400a0000 0x100>;
22		interrupt-parent = <&mic>;
23		interrupts = <51 0>;
24		#address-cells = <1>;
25		#size-cells = <0>;
26	};
27
28	i2c2: i2c@400a8000 {
29		compatible = "nxp,pnx-i2c";
30		reg = <0x400a8000 0x100>;
31		interrupt-parent = <&mic>;
32		interrupts = <50 0>;
33		#address-cells = <1>;
34		#size-cells = <0>;
35		clock-frequency = <100000>;
36	};
37