1ltc2978
2
3Required properties:
4- compatible: should contain one of:
5  * "lltc,ltc2974"
6  * "lltc,ltc2975"
7  * "lltc,ltc2977"
8  * "lltc,ltc2978"
9  * "lltc,ltc2980"
10  * "lltc,ltc3880"
11  * "lltc,ltc3882"
12  * "lltc,ltc3883"
13  * "lltc,ltc3886"
14  * "lltc,ltc3887"
15  * "lltc,ltm2987"
16  * "lltc,ltm4675"
17  * "lltc,ltm4676"
18- reg: I2C slave address
19
20Optional properties:
21- regulators: A node that houses a sub-node for each regulator controlled by
22  the device. Each sub-node is identified using the node's name, with valid
23  values listed below. The content of each sub-node is defined by the
24  standard binding for regulators; see regulator.txt.
25
26Valid names of regulators depend on number of supplies supported per device:
27  * ltc2974, ltc2975 : vout0 - vout3
28  * ltc2977, ltc2980, ltm2987 : vout0 - vout7
29  * ltc2978 : vout0 - vout7
30  * ltc3880, ltc3882, ltc3886 : vout0 - vout1
31  * ltc3883 : vout0
32  * ltm4676 : vout0 - vout1
33
34Example:
35ltc2978@5e {
36	compatible = "lltc,ltc2978";
37	reg = <0x5e>;
38	regulators {
39		vout0 {
40			regulator-name = "FPGA-2.5V";
41		};
42		vout2 {
43			regulator-name = "FPGA-1.5V";
44		};
45	};
46};
47