1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: PTN5150 CC (Configuration Channel) Logic device
8
9maintainers:
10  - Krzysztof Kozlowski <krzk@kernel.org>
11
12description: |
13  PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
14  connector application with CC control logic detection and indication
15  functions.  It is interfaced to the host controller using an I2C interface.
16
17properties:
18  compatible:
19    const: nxp,ptn5150
20
21  int-gpios:
22    maxItems: 1
23    deprecated: true
24    description:
25      GPIO pin (input) connected to the PTN5150's INTB pin.
26      Use "interrupts" instead.
27
28  interrupts:
29    maxItems: 1
30
31  reg:
32    maxItems: 1
33
34  vbus-gpios:
35    maxItems: 1
36    description:
37      GPIO pin (output) used to control VBUS. If skipped, no such control
38      takes place.
39
40required:
41  - compatible
42  - interrupts
43  - reg
44
45additionalProperties: false
46
47examples:
48  - |
49    #include <dt-bindings/gpio/gpio.h>
50    #include <dt-bindings/interrupt-controller/irq.h>
51    i2c {
52        #address-cells = <1>;
53        #size-cells = <0>;
54
55        ptn5150@1d {
56            compatible = "nxp,ptn5150";
57            reg = <0x1d>;
58            interrupt-parent = <&msmgpio>;
59            interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
60            vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
61        };
62    };
63