1# SPDX-License-Identifier: GPL-2.0-only 2# Copyright 2019 BayLibre SAS 3%YAML 1.2 4--- 5$id: "http://devicetree.org/schemas/eeprom/at24.yaml#" 6$schema: "http://devicetree.org/meta-schemas/core.yaml#" 7 8title: I2C EEPROMs compatible with Atmel's AT24 9 10maintainers: 11 - Bartosz Golaszewski <bgolaszewski@baylibre.com> 12 13select: 14 properties: 15 compatible: 16 contains: 17 pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" 18 required: 19 - compatible 20 21properties: 22 $nodename: 23 pattern: "^eeprom@[0-9a-f]{1,2}$" 24 25 # There are multiple known vendors who manufacture EEPROM chips compatible 26 # with Atmel's AT24. The compatible string requires either a single item 27 # if the memory comes from Atmel (in which case the vendor part must be 28 # 'atmel') or two items with the same 'model' part where the vendor part of 29 # the first one is the actual manufacturer and the second item is the 30 # corresponding 'atmel,<model>' from Atmel. 31 compatible: 32 oneOf: 33 - allOf: 34 - minItems: 1 35 items: 36 - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$" 37 - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" 38 - oneOf: 39 - items: 40 pattern: c00$ 41 - items: 42 pattern: c01$ 43 - items: 44 pattern: cs01$ 45 - items: 46 pattern: c02$ 47 - items: 48 pattern: cs02$ 49 - items: 50 pattern: mac402$ 51 - items: 52 pattern: mac602$ 53 - items: 54 pattern: c04$ 55 - items: 56 pattern: cs04$ 57 - items: 58 pattern: c08$ 59 - items: 60 pattern: cs08$ 61 - items: 62 pattern: c16$ 63 - items: 64 pattern: cs16$ 65 - items: 66 pattern: c32$ 67 - items: 68 pattern: cs32$ 69 - items: 70 pattern: c64$ 71 - items: 72 pattern: cs64$ 73 - items: 74 pattern: c128$ 75 - items: 76 pattern: cs128$ 77 - items: 78 pattern: c256$ 79 - items: 80 pattern: cs256$ 81 - items: 82 pattern: c512$ 83 - items: 84 pattern: cs512$ 85 - items: 86 pattern: c1024$ 87 - items: 88 pattern: cs1024$ 89 - items: 90 pattern: c1025$ 91 - items: 92 pattern: cs1025$ 93 - items: 94 pattern: c2048$ 95 - items: 96 pattern: cs2048$ 97 - items: 98 pattern: spd$ 99 # These are special cases that don't conform to the above pattern. 100 # Each requires a standard at24 model as fallback. 101 - items: 102 - enum: 103 - rohm,br24g01 104 - rohm,br24t01 105 - const: atmel,24c01 106 - items: 107 - enum: 108 - nxp,se97b 109 - renesas,r1ex24002 110 - const: atmel,24c02 111 - items: 112 - enum: 113 - onnn,cat24c04 114 - onnn,cat24c05 115 - const: atmel,24c04 116 - items: 117 - const: renesas,r1ex24016 118 - const: atmel,24c16 119 - items: 120 - const: giantec,gt24c32a 121 - const: atmel,24c32 122 - items: 123 - enum: 124 - renesas,r1ex24128 125 - samsung,s524ad0xd1 126 - const: atmel,24c128 127 128 label: 129 description: Descriptive name of the EEPROM. 130 131 reg: 132 maxItems: 1 133 134 pagesize: 135 description: 136 The length of the pagesize for writing. Please consult the 137 manual of your device, that value varies a lot. A wrong value 138 may result in data loss! If not specified, a safety value of 139 '1' is used which will be very slow. 140 $ref: /schemas/types.yaml#/definitions/uint32 141 enum: [1, 8, 16, 32, 64, 128, 256] 142 default: 1 143 144 read-only: 145 $ref: /schemas/types.yaml#/definitions/flag 146 description: 147 Disables writes to the eeprom. 148 149 size: 150 $ref: /schemas/types.yaml#/definitions/uint32 151 description: 152 Total eeprom size in bytes. 153 154 no-read-rollover: 155 $ref: /schemas/types.yaml#/definitions/flag 156 description: 157 Indicates that the multi-address eeprom does not automatically roll 158 over reads to the next slave address. Please consult the manual of 159 your device. 160 161 wp-gpios: true 162 163 address-width: 164 description: 165 Number of address bits. 166 $ref: /schemas/types.yaml#/definitions/uint32 167 default: 8 168 enum: [ 8, 16 ] 169 170 num-addresses: 171 description: 172 Total number of i2c slave addresses this device takes. 173 $ref: /schemas/types.yaml#/definitions/uint32 174 default: 1 175 minimum: 1 176 maximum: 8 177 178 vcc-supply: 179 description: 180 phandle of the regulator that provides the supply voltage. 181 182required: 183 - compatible 184 - reg 185 186additionalProperties: false 187 188examples: 189 - | 190 i2c { 191 #address-cells = <1>; 192 #size-cells = <0>; 193 194 eeprom@52 { 195 compatible = "microchip,24c32", "atmel,24c32"; 196 reg = <0x52>; 197 pagesize = <32>; 198 wp-gpios = <&gpio1 3 0>; 199 num-addresses = <8>; 200 }; 201 }; 202... 203