1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Lightning Mountain centralized DMA controllers.
8
9maintainers:
10  - chuanhua.lei@intel.com
11  - mallikarjunax.reddy@intel.com
12
13allOf:
14  - $ref: "dma-controller.yaml#"
15
16properties:
17  compatible:
18    enum:
19      - intel,lgm-cdma
20      - intel,lgm-dma2tx
21      - intel,lgm-dma1rx
22      - intel,lgm-dma1tx
23      - intel,lgm-dma0tx
24      - intel,lgm-dma3
25      - intel,lgm-toe-dma30
26      - intel,lgm-toe-dma31
27
28  reg:
29    maxItems: 1
30
31  "#dma-cells":
32    const: 3
33    description:
34      The first cell is the peripheral's DMA request line.
35      The second cell is the peripheral's (port) number corresponding to the channel.
36      The third cell is the burst length of the channel.
37
38  dma-channels:
39    minimum: 1
40    maximum: 16
41
42  dma-channel-mask:
43    maxItems: 1
44
45  clocks:
46    maxItems: 1
47
48  resets:
49    maxItems: 1
50
51  reset-names:
52    items:
53      - const: ctrl
54
55  interrupts:
56    maxItems: 1
57
58  intel,dma-poll-cnt:
59    $ref: /schemas/types.yaml#/definitions/uint32
60    description:
61      DMA descriptor polling counter is used to control the poling mechanism
62      for the descriptor fetching for all channels.
63
64  intel,dma-byte-en:
65    type: boolean
66    description:
67      DMA byte enable is only valid for DMA write(RX).
68      Byte enable(1) means DMA write will be based on the number of dwords
69      instead of the whole burst.
70
71  intel,dma-drb:
72    type: boolean
73    description:
74      DMA descriptor read back to make sure data and desc synchronization.
75
76  intel,dma-dburst-wr:
77    type: boolean
78    description:
79      Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
80      if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
81      It only applies to RX DMA and memcopy DMA.
82
83required:
84  - compatible
85  - reg
86
87additionalProperties: false
88
89examples:
90  - |
91    dma0: dma-controller@e0e00000 {
92      compatible = "intel,lgm-cdma";
93      reg = <0xe0e00000 0x1000>;
94      #dma-cells = <3>;
95      dma-channels = <16>;
96      dma-channel-mask = <0xFFFF>;
97      interrupt-parent = <&ioapic1>;
98      interrupts = <82 1>;
99      resets = <&rcu0 0x30 0>;
100      reset-names = "ctrl";
101      clocks = <&cgu0 80>;
102      intel,dma-poll-cnt = <4>;
103      intel,dma-byte-en;
104      intel,dma-drb;
105    };
106  - |
107    dma3: dma-controller@ec800000 {
108      compatible = "intel,lgm-dma3";
109      reg = <0xec800000 0x1000>;
110      clocks = <&cgu0 71>;
111      resets = <&rcu0 0x10 9>;
112      #dma-cells = <3>;
113      intel,dma-poll-cnt = <16>;
114      intel,dma-byte-en;
115      intel,dma-dburst-wr;
116    };
117