1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Ingenic SoCs DMA Controller
8
9maintainers:
10  - Paul Cercueil <paul@crapouillou.net>
11
12allOf:
13  - $ref: "dma-controller.yaml#"
14
15properties:
16  compatible:
17    oneOf:
18      - enum:
19          - ingenic,jz4740-dma
20          - ingenic,jz4725b-dma
21          - ingenic,jz4755-dma
22          - ingenic,jz4760-dma
23          - ingenic,jz4760-bdma
24          - ingenic,jz4760-mdma
25          - ingenic,jz4760b-dma
26          - ingenic,jz4760b-bdma
27          - ingenic,jz4760b-mdma
28          - ingenic,jz4770-dma
29          - ingenic,jz4780-dma
30          - ingenic,x1000-dma
31          - ingenic,x1830-dma
32      - items:
33          - const: ingenic,jz4770-bdma
34          - const: ingenic,jz4760b-bdma
35
36  reg:
37    items:
38      - description: Channel-specific registers
39      - description: System control registers
40
41  interrupts:
42    maxItems: 1
43
44  clocks:
45    maxItems: 1
46
47  "#dma-cells":
48    enum: [2, 3]
49    description: >
50      DMA clients must use the format described in dma.txt, giving a phandle
51      to the DMA controller plus the following integer cells:
52
53      - Request type: The DMA request type specifies the device endpoint that
54        will be the source or destination of the DMA transfer.
55        If "#dma-cells" is 2, the request type is a single cell, and the
56        direction will be unidirectional (either RX or TX but not both).
57        If "#dma-cells" is 3, the request type has two cells; the first
58        one corresponds to the host to device direction (TX), the second one
59        corresponds to the device to host direction (RX). The DMA channel is
60        then bidirectional.
61
62      - Channel: If set to 0xffffffff, any available channel will be allocated
63        for the client. Otherwise, the exact channel specified will be used.
64        The channel should be reserved on the DMA controller using the
65        ingenic,reserved-channels property.
66
67  ingenic,reserved-channels:
68    $ref: /schemas/types.yaml#/definitions/uint32
69    description: >
70      Bitmask of channels to reserve for devices that need a specific
71      channel. These channels will only be assigned when explicitely
72      requested by a client. The primary use for this is channels 0 and
73      1, which can be configured to have special behaviour for NAND/BCH
74      when using programmable firmware.
75
76required:
77  - compatible
78  - reg
79  - interrupts
80  - clocks
81
82unevaluatedProperties: false
83
84examples:
85  - |
86    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
87    dma: dma-controller@13420000 {
88      compatible = "ingenic,jz4780-dma";
89      reg = <0x13420000 0x400>, <0x13421000 0x40>;
90
91      interrupt-parent = <&intc>;
92      interrupts = <10>;
93
94      clocks = <&cgu JZ4780_CLK_PDMA>;
95
96      #dma-cells = <2>;
97
98      ingenic,reserved-channels = <0x3>;
99    };
100