1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/dma/arm-pl08x.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: ARM PrimeCells PL080 and PL081 and derivatives DMA controller
8
9maintainers:
10  - Vinod Koul <vkoul@kernel.org>
11
12allOf:
13  - $ref: /schemas/arm/primecell.yaml#
14  - $ref: "dma-controller.yaml#"
15
16# We need a select here so we don't match all nodes with 'arm,primecell'
17select:
18  properties:
19    compatible:
20      contains:
21        enum:
22          - arm,pl080
23          - arm,pl081
24  required:
25    - compatible
26
27properties:
28  compatible:
29    oneOf:
30      - items:
31          - enum:
32              - arm,pl080
33              - arm,pl081
34          - const: arm,primecell
35      - items:
36          - const: faraday,ftdma020
37          - const: arm,pl080
38          - const: arm,primecell
39
40  reg:
41    maxItems: 1
42    description: Address range of the PL08x registers
43
44  interrupts:
45    minItems: 1
46    description: The PL08x interrupt number
47
48  clocks:
49    minItems: 1
50    description: The clock running the IP core clock
51
52  clock-names:
53    maxItems: 1
54
55  lli-bus-interface-ahb1:
56    type: boolean
57    description: if AHB master 1 is eligible for fetching LLIs
58
59  lli-bus-interface-ahb2:
60    type: boolean
61    description: if AHB master 2 is eligible for fetching LLIs
62
63  mem-bus-interface-ahb1:
64    type: boolean
65    description: if AHB master 1 is eligible for fetching memory contents
66
67  mem-bus-interface-ahb2:
68    type: boolean
69    description: if AHB master 2 is eligible for fetching memory contents
70
71  memcpy-burst-size:
72    $ref: /schemas/types.yaml#/definitions/uint32
73    enum:
74      - 1
75      - 4
76      - 8
77      - 16
78      - 32
79      - 64
80      - 128
81      - 256
82    description: the size of the bursts for memcpy
83
84  memcpy-bus-width:
85    $ref: /schemas/types.yaml#/definitions/uint32
86    enum:
87      - 8
88      - 16
89      - 32
90      - 64
91    description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits
92
93  resets:
94    maxItems: 1
95
96required:
97  - reg
98  - interrupts
99  - clocks
100  - clock-names
101  - "#dma-cells"
102
103unevaluatedProperties: false
104
105examples:
106  - |
107    dmac0: dma-controller@10130000 {
108      compatible = "arm,pl080", "arm,primecell";
109      reg = <0x10130000 0x1000>;
110      interrupt-parent = <&vica>;
111      interrupts = <15>;
112      clocks = <&hclkdma0>;
113      clock-names = "apb_pclk";
114      lli-bus-interface-ahb1;
115      lli-bus-interface-ahb2;
116      mem-bus-interface-ahb2;
117      memcpy-burst-size = <256>;
118      memcpy-bus-width = <32>;
119      #dma-cells = <2>;
120    };
121  - |
122    #include <dt-bindings/interrupt-controller/irq.h>
123    #include <dt-bindings/reset/cortina,gemini-reset.h>
124    #include <dt-bindings/clock/cortina,gemini-clock.h>
125    dma-controller@67000000 {
126      compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
127      /* Faraday Technology FTDMAC020 variant */
128      arm,primecell-periphid = <0x0003b080>;
129      reg = <0x67000000 0x1000>;
130      interrupts = <9 IRQ_TYPE_EDGE_RISING>;
131      resets = <&syscon GEMINI_RESET_DMAC>;
132      clocks = <&syscon GEMINI_CLK_AHB>;
133      clock-names = "apb_pclk";
134      /* Bus interface AHB1 (AHB0) is totally tilted */
135      lli-bus-interface-ahb2;
136      mem-bus-interface-ahb2;
137      memcpy-burst-size = <256>;
138      memcpy-bus-width = <32>;
139      #dma-cells = <2>;
140    };
141