xref: /openbmc/linux/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml (revision f4284724)

# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung Exynos SoC HDMI

maintainers:
  - Inki Dae <inki.dae@samsung.com>
  - Seung-Woo Kim <sw0312.kim@samsung.com>
  - Kyungmin Park <kyungmin.park@samsung.com>
  - Krzysztof Kozlowski <krzk@kernel.org>

properties:
  compatible:
    enum:
      - samsung,exynos4210-hdmi
      - samsung,exynos4212-hdmi
      - samsung,exynos5420-hdmi
      - samsung,exynos5433-hdmi

  clocks:
    minItems: 5
    maxItems: 10

  clock-names:
    minItems: 5
    maxItems: 10

  ddc:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to the HDMI DDC node.

  hdmi-en-supply:
    description:
      Provides voltage source for DCC lines available on HDMI connector. When
      there is no power provided for DDC epprom, some TV-sets do not pulls up
      HPD (hot plug detect) line, what causes HDMI block to stay turned off.
      When provided, the regulator allows TV-set correctly signal HPD event.

  hpd-gpios:
    maxItems: 1
    description:
      A GPIO line connected to HPD

  interrupts:
    maxItems: 1

  phy:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: Phandle to the HDMI PHY node.

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
    description:
      Contains a port which is connected to mic node.

  power-domains:
    maxItems: 1

  reg:
    maxItems: 1

  samsung,syscon-phandle:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to the PMU system controller node.

  samsung,sysreg-phandle:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to DISP system controller interface.

  '#sound-dai-cells':
    const: 0

  vdd-supply:
    description:
      VDD 1.0V HDMI TX.

  vdd_osc-supply:
    description:
      VDD 1.8V HDMI OSC.

  vdd_pll-supply:
    description:
      VDD 1.0V HDMI PLL.

required:
  - compatible
  - clocks
  - clock-names
  - ddc
  - hpd-gpios
  - interrupts
  - phy
  - reg
  - samsung,syscon-phandle
  - '#sound-dai-cells'
  - vdd-supply
  - vdd_osc-supply
  - vdd_pll-supply

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynos5433-hdmi
    then:
      properties:
        clocks:
          items:
            - description: Gate of HDMI IP APB bus.
            - description: Gate of HDMI-PHY IP APB bus.
            - description: Gate of HDMI TMDS clock.
            - description: Gate of HDMI pixel clock.
            - description: TMDS clock generated by HDMI-PHY.
            - description: MUX used to switch between oscclk and tmds_clko,
                respectively if HDMI-PHY is off and operational.
            - description: Pixel clock generated by HDMI-PHY.
            - description: MUX used to switch between oscclk and pixel_clko,
                respectively if HDMI-PHY is off and operational.
            - description: Oscillator clock, used as parent of following *_user
                clocks in case HDMI-PHY is not operational.
            - description: Gate of HDMI SPDIF clock.
        clock-names:
          items:
            - const: hdmi_pclk
            - const: hdmi_i_pclk
            - const: i_tmds_clk
            - const: i_pixel_clk
            - const: tmds_clko
            - const: tmds_clko_user
            - const: pixel_clko
            - const: pixel_clko_user
            - const: oscclk
            - const: i_spdif_clk
      required:
        - samsung,sysreg-phandle
    else:
      properties:
        clocks:
          items:
            - description: Gate of HDMI IP bus clock.
            - description: Gate of HDMI special clock.
            - description: Pixel special clock, one of the two possible inputs
                of HDMI clock mux.
            - description: HDMI PHY clock output, one of two possible inputs of
                HDMI clock mux.
            - description: It is required by the driver to switch between the 2
                parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
                after configuration, parent is set to sclk_hdmiphy else
                sclk_pixel.
        clock-names:
          items:
            - const: hdmi
            - const: sclk_hdmi
            - const: sclk_pixel
            - const: sclk_hdmiphy
            - const: mout_hdmi

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/exynos5433.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    hdmi@13970000 {
        compatible = "samsung,exynos5433-hdmi";
        reg = <0x13970000 0x70000>;
        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&cmu_disp CLK_PCLK_HDMI>,
                 <&cmu_disp CLK_PCLK_HDMIPHY>,
                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
                 <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
                 <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
                 <&xxti>,
                 <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
        clock-names = "hdmi_pclk",
                      "hdmi_i_pclk",
                      "i_tmds_clk",
                      "i_pixel_clk",
                      "tmds_clko",
                      "tmds_clko_user",
                      "pixel_clko",
                      "pixel_clko_user",
                      "oscclk",
                      "i_spdif_clk";
        phy = <&hdmiphy>;
        ddc = <&hsi2c_11>;
        samsung,syscon-phandle = <&pmu_system_controller>;
        samsung,sysreg-phandle = <&syscon_disp>;
        #sound-dai-cells = <0>;

        hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
        vdd-supply = <&ldo6_reg>;
        vdd_osc-supply = <&ldo7_reg>;
        vdd_pll-supply = <&ldo6_reg>;

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;
                hdmi_to_tv: endpoint {
                    remote-endpoint = <&tv_to_hdmi>;
                };
            };

            port@1 {
                reg = <1>;
                hdmi_to_mhl: endpoint {
                    remote-endpoint = <&mhl_to_hdmi>;
                };
            };
        };
    };