1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Rockchip rk3066 HDMI controller 8 9maintainers: 10 - Sandy Huang <hjc@rock-chips.com> 11 - Heiko Stuebner <heiko@sntech.de> 12 13properties: 14 compatible: 15 const: rockchip,rk3066-hdmi 16 17 reg: 18 maxItems: 1 19 20 interrupts: 21 maxItems: 1 22 23 clocks: 24 maxItems: 1 25 26 clock-names: 27 const: hclk 28 29 power-domains: 30 maxItems: 1 31 32 rockchip,grf: 33 $ref: /schemas/types.yaml#/definitions/phandle 34 description: 35 This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. 36 37 ports: 38 $ref: /schemas/graph.yaml#/properties/ports 39 40 properties: 41 port@0: 42 $ref: /schemas/graph.yaml#/properties/port 43 description: 44 Port node with two endpoints, numbered 0 and 1, 45 connected respectively to vop0 and vop1. 46 47 port@1: 48 $ref: /schemas/graph.yaml#/properties/port 49 description: 50 Port node with one endpoint connected to a hdmi-connector node. 51 52 required: 53 - port@0 54 - port@1 55 56required: 57 - compatible 58 - reg 59 - interrupts 60 - clocks 61 - clock-names 62 - pinctrl-0 63 - pinctrl-names 64 - power-domains 65 - rockchip,grf 66 - ports 67 68additionalProperties: false 69 70examples: 71 - | 72 #include <dt-bindings/clock/rk3066a-cru.h> 73 #include <dt-bindings/interrupt-controller/arm-gic.h> 74 #include <dt-bindings/pinctrl/rockchip.h> 75 #include <dt-bindings/power/rk3066-power.h> 76 hdmi: hdmi@10116000 { 77 compatible = "rockchip,rk3066-hdmi"; 78 reg = <0x10116000 0x2000>; 79 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; 80 clocks = <&cru HCLK_HDMI>; 81 clock-names = "hclk"; 82 pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; 83 pinctrl-names = "default"; 84 power-domains = <&power RK3066_PD_VIO>; 85 rockchip,grf = <&grf>; 86 87 ports { 88 #address-cells = <1>; 89 #size-cells = <0>; 90 hdmi_in: port@0 { 91 reg = <0>; 92 #address-cells = <1>; 93 #size-cells = <0>; 94 hdmi_in_vop0: endpoint@0 { 95 reg = <0>; 96 remote-endpoint = <&vop0_out_hdmi>; 97 }; 98 hdmi_in_vop1: endpoint@1 { 99 reg = <1>; 100 remote-endpoint = <&vop1_out_hdmi>; 101 }; 102 }; 103 hdmi_out: port@1 { 104 reg = <1>; 105 hdmi_out_con: endpoint { 106 remote-endpoint = <&hdmi_con_in>; 107 }; 108 }; 109 }; 110 }; 111 112 pinctrl { 113 hdmi { 114 hdmi_hpd: hdmi-hpd { 115 rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; 116 }; 117 hdmii2c_xfer: hdmii2c-xfer { 118 rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, 119 <0 RK_PA2 1 &pcfg_pull_none>; 120 }; 121 }; 122 }; 123