1# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Display DPU on SM6115
8
9maintainers:
10  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
11
12$ref: /schemas/display/msm/dpu-common.yaml#
13
14properties:
15  compatible:
16    const: qcom,sm6115-dpu
17
18  reg:
19    items:
20      - description: MDP register set
21      - description: VBIF register set
22
23  reg-names:
24    items:
25      - const: mdp
26      - const: vbif
27
28  clocks:
29    items:
30      - description: Display AXI
31      - description: Display AHB
32      - description: Display core
33      - description: Display lut
34      - description: Display rotator
35      - description: Display vsync
36
37  clock-names:
38    items:
39      - const: bus
40      - const: iface
41      - const: core
42      - const: lut
43      - const: rot
44      - const: vsync
45
46required:
47  - compatible
48  - reg
49  - reg-names
50  - clocks
51  - clock-names
52
53unevaluatedProperties: false
54
55examples:
56  - |
57    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
58    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
59    #include <dt-bindings/power/qcom-rpmpd.h>
60
61    display-controller@5e01000 {
62        compatible = "qcom,sm6115-dpu";
63        reg = <0x05e01000 0x8f000>,
64              <0x05eb0000 0x2008>;
65        reg-names = "mdp", "vbif";
66
67        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
68                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
69                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
70                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
71                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
72                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
73        clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
74
75        operating-points-v2 = <&mdp_opp_table>;
76        power-domains = <&rpmpd SM6115_VDDCX>;
77
78        interrupt-parent = <&mdss>;
79        interrupts = <0>;
80
81        ports {
82            #address-cells = <1>;
83            #size-cells = <0>;
84
85            port@0 {
86                reg = <0>;
87                endpoint {
88                    remote-endpoint = <&dsi0_in>;
89                };
90            };
91        };
92    };
93...
94