1PXA LCD Controller
2------------------
3
4Required properties:
5 - compatible : one of these
6	"marvell,pxa2xx-lcdc",
7	"marvell,pxa270-lcdc",
8	"marvell,pxa300-lcdc"
9 - reg : should contain 1 register range (address and length).
10 - interrupts : framebuffer controller interrupt.
11 - clocks: phandle to input clocks
12
13Required nodes:
14 - port: connection to the LCD panel (see video-interfaces.txt)
15	 This node must have its properties bus-width and remote-endpoint set.
16	 If the panel is not a TFT color panel, then a "lcd-type" property in
17	 the panel should specify the panel type.
18	 This panel node should be in the board dts.
19
20Example:
21	lcd-controller@40500000 {
22		compatible = "marvell,pxa2xx-lcdc";
23		reg = <0x44000000 0x10000>;
24		interrupts = <17>;
25		clocks = <&clks CLK_LCD>;
26		status = "okay";
27
28		port {
29			lcdc_out: endpoint {
30				remote-endpoint = <&panel_in>;
31				bus-width = <16>;
32			};
33		};
34	};
35