1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Northwest Logic MIPI-DSI controller on i.MX SoCs
8
9maintainers:
10  - Guido Gúnther <agx@sigxcpu.org>
11  - Robert Chiras <robert.chiras@nxp.com>
12
13description: |
14  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
15  the SOCs NWL MIPI-DSI host controller.
16
17properties:
18  compatible:
19    const: fsl,imx8mq-nwl-dsi
20
21  reg:
22    maxItems: 1
23
24  interrupts:
25    maxItems: 1
26
27  '#address-cells':
28    const: 1
29
30  '#size-cells':
31    const: 0
32
33  clocks:
34    items:
35      - description: DSI core clock
36      - description: RX_ESC clock (used in escape mode)
37      - description: TX_ESC clock (used in escape mode)
38      - description: PHY_REF clock
39      - description: LCDIF clock
40
41  clock-names:
42    items:
43      - const: core
44      - const: rx_esc
45      - const: tx_esc
46      - const: phy_ref
47      - const: lcdif
48
49  mux-controls:
50    description:
51      mux controller node to use for operating the input mux
52
53  phys:
54    maxItems: 1
55    description:
56      A phandle to the phy module representing the DPHY
57
58  phy-names:
59    items:
60      - const: dphy
61
62  power-domains:
63    maxItems: 1
64
65  resets:
66    items:
67      - description: dsi byte reset line
68      - description: dsi dpi reset line
69      - description: dsi esc reset line
70      - description: dsi pclk reset line
71
72  reset-names:
73    items:
74      - const: byte
75      - const: dpi
76      - const: esc
77      - const: pclk
78
79  ports:
80    type: object
81    description:
82      A node containing DSI input & output port nodes with endpoint
83      definitions as documented in
84      Documentation/devicetree/bindings/graph.txt.
85    properties:
86      port@0:
87        type: object
88        description:
89          Input port node to receive pixel data from the
90          display controller. Exactly one endpoint must be
91          specified.
92        properties:
93          '#address-cells':
94            const: 1
95
96          '#size-cells':
97            const: 0
98
99          endpoint@0:
100            description: sub-node describing the input from LCDIF
101            type: object
102
103          endpoint@1:
104            description: sub-node describing the input from DCSS
105            type: object
106
107          reg:
108            const: 0
109
110        required:
111          - '#address-cells'
112          - '#size-cells'
113          - reg
114
115        oneOf:
116          - required:
117              - endpoint@0
118          - required:
119              - endpoint@1
120
121        additionalProperties: false
122
123      port@1:
124        type: object
125        description:
126          DSI output port node to the panel or the next bridge
127          in the chain
128
129      '#address-cells':
130        const: 1
131
132      '#size-cells':
133        const: 0
134
135    required:
136      - '#address-cells'
137      - '#size-cells'
138      - port@0
139      - port@1
140
141    additionalProperties: false
142
143patternProperties:
144  "^panel@[0-9]+$":
145    type: object
146
147required:
148  - '#address-cells'
149  - '#size-cells'
150  - clock-names
151  - clocks
152  - compatible
153  - interrupts
154  - mux-controls
155  - phy-names
156  - phys
157  - ports
158  - reg
159  - reset-names
160  - resets
161
162additionalProperties: false
163
164examples:
165  - |
166    #include <dt-bindings/clock/imx8mq-clock.h>
167    #include <dt-bindings/gpio/gpio.h>
168    #include <dt-bindings/interrupt-controller/arm-gic.h>
169    #include <dt-bindings/reset/imx8mq-reset.h>
170
171    mipi_dsi: mipi_dsi@30a00000 {
172              #address-cells = <1>;
173              #size-cells = <0>;
174              compatible = "fsl,imx8mq-nwl-dsi";
175              reg = <0x30A00000 0x300>;
176              clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
177                       <&clk IMX8MQ_CLK_DSI_AHB>,
178                       <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
179                       <&clk IMX8MQ_CLK_DSI_PHY_REF>,
180                       <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
181              clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
182              interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
183              mux-controls = <&mux 0>;
184              power-domains = <&pgc_mipi>;
185              resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
186                       <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
187                       <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
188                       <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
189              reset-names = "byte", "dpi", "esc", "pclk";
190              phys = <&dphy>;
191              phy-names = "dphy";
192
193              panel@0 {
194                      compatible = "rocktech,jh057n00900";
195                      reg = <0>;
196                      vcc-supply = <&reg_2v8_p>;
197                      iovcc-supply = <&reg_1v8_p>;
198                      reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
199                      port {
200                           panel_in: endpoint {
201                                     remote-endpoint = <&mipi_dsi_out>;
202                           };
203                      };
204              };
205
206              ports {
207                    #address-cells = <1>;
208                    #size-cells = <0>;
209
210                    port@0 {
211                           #size-cells = <0>;
212                           #address-cells = <1>;
213                           reg = <0>;
214                           mipi_dsi_in: endpoint@0 {
215                                        reg = <0>;
216                                        remote-endpoint = <&lcdif_mipi_dsi>;
217                           };
218                    };
219                    port@1 {
220                           reg = <1>;
221                           mipi_dsi_out: endpoint {
222                                         remote-endpoint = <&panel_in>;
223                           };
224                    };
225              };
226    };
227