1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Transparent LVDS encoders and decoders
8
9maintainers:
10  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
11
12description: |
13  This binding supports transparent LVDS encoders and decoders that don't
14  require any configuration.
15
16  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
17  incompatible data link layers have been used over time to transmit image data
18  to LVDS panels. This binding targets devices compatible with the following
19  specifications only.
20
21  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
22  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
23  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
24  Semiconductor
25  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
26  Electronics Standards Association (VESA)
27
28  Those devices have been marketed under the FPD-Link and FlatLink brand names
29  among others.
30
31properties:
32  compatible:
33    oneOf:
34      - items:
35        - enum:
36          - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
37          - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
38          - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
39        - const: lvds-encoder # Generic LVDS encoder compatible fallback
40      - items:
41        - enum:
42          - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
43        - const: lvds-decoder # Generic LVDS decoders compatible fallback
44      - enum:
45        - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
46
47  ports:
48    type: object
49    description: |
50      This device has two video ports. Their connections are modeled using the
51      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt
52    properties:
53      port@0:
54        type: object
55        description: |
56          For LVDS encoders, port 0 is the parallel input
57          For LVDS decoders, port 0 is the LVDS input
58
59      port@1:
60        type: object
61        description: |
62          For LVDS encoders, port 1 is the LVDS output
63          For LVDS decoders, port 1 is the parallel output
64
65    required:
66      - port@0
67      - port@1
68
69  powerdown-gpios:
70    description:
71      The GPIO used to control the power down line of this device.
72    maxItems: 1
73
74required:
75  - compatible
76  - ports
77
78examples:
79  - |
80    lvds-encoder {
81      compatible = "ti,ds90c185", "lvds-encoder";
82
83      ports {
84        #address-cells = <1>;
85        #size-cells = <0>;
86
87        port@0 {
88          reg = <0>;
89
90          lvds_enc_in: endpoint {
91            remote-endpoint = <&display_out_rgb>;
92          };
93        };
94
95        port@1 {
96          reg = <1>;
97
98          lvds_enc_out: endpoint {
99            remote-endpoint = <&lvds_panel_in>;
100          };
101        };
102      };
103    };
104
105  - |
106    lvds-decoder {
107      compatible = "ti,ds90cf384a", "lvds-decoder";
108
109      ports {
110        #address-cells = <1>;
111        #size-cells = <0>;
112
113        port@0 {
114          reg = <0>;
115
116          lvds_dec_in: endpoint {
117            remote-endpoint = <&display_out_lvds>;
118          };
119        };
120
121        port@1 {
122          reg = <1>;
123
124          lvds_dec_out: endpoint {
125            remote-endpoint = <&rgb_panel_in>;
126          };
127        };
128      };
129    };
130
131...
132