1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Cadence MHDP8546 bridge 8 9maintainers: 10 - Swapnil Jakhade <sjakhade@cadence.com> 11 - Yuti Amonkar <yamonkar@cadence.com> 12 13properties: 14 compatible: 15 enum: 16 - cdns,mhdp8546 17 - ti,j721e-mhdp8546 18 19 reg: 20 minItems: 1 21 items: 22 - description: 23 Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). 24 The AUX and PMA registers are not part of this range, they are instead 25 included in the associated PHY. 26 - description: 27 Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs. 28 - description: 29 Register block of mhdptx sapb registers. 30 31 reg-names: 32 minItems: 1 33 items: 34 - const: mhdptx 35 - const: j721e-intg 36 - const: mhdptx-sapb 37 38 clocks: 39 maxItems: 1 40 description: 41 DP bridge clock, used by the IP to know how to translate a number of 42 clock cycles into a time (which is used to comply with DP standard timings 43 and delays). 44 45 phys: 46 maxItems: 1 47 description: 48 phandle to the DisplayPort PHY. 49 50 phy-names: 51 items: 52 - const: dpphy 53 54 power-domains: 55 maxItems: 1 56 57 interrupts: 58 maxItems: 1 59 60 ports: 61 $ref: /schemas/graph.yaml#/properties/ports 62 63 properties: 64 port@0: 65 $ref: /schemas/graph.yaml#/properties/port 66 description: 67 First input port representing the DP bridge input. 68 69 port@1: 70 $ref: /schemas/graph.yaml#/properties/port 71 description: 72 Second input port representing the DP bridge input. 73 74 port@2: 75 $ref: /schemas/graph.yaml#/properties/port 76 description: 77 Third input port representing the DP bridge input. 78 79 port@3: 80 $ref: /schemas/graph.yaml#/properties/port 81 description: 82 Fourth input port representing the DP bridge input. 83 84 port@4: 85 $ref: /schemas/graph.yaml#/properties/port 86 description: 87 Output port representing the DP bridge output. 88 89 required: 90 - port@0 91 - port@4 92 93allOf: 94 - if: 95 properties: 96 compatible: 97 contains: 98 const: ti,j721e-mhdp8546 99 then: 100 properties: 101 reg: 102 minItems: 2 103 maxItems: 3 104 reg-names: 105 minItems: 2 106 maxItems: 3 107 else: 108 properties: 109 reg: 110 minItems: 1 111 maxItems: 2 112 reg-names: 113 minItems: 1 114 maxItems: 2 115 116required: 117 - compatible 118 - clocks 119 - reg 120 - reg-names 121 - phys 122 - phy-names 123 - interrupts 124 - ports 125 126additionalProperties: false 127 128examples: 129 - | 130 #include <dt-bindings/interrupt-controller/arm-gic.h> 131 bus { 132 #address-cells = <2>; 133 #size-cells = <2>; 134 135 mhdp: dp-bridge@f0fb000000 { 136 compatible = "cdns,mhdp8546"; 137 reg = <0xf0 0xfb000000 0x0 0x1000000>; 138 reg-names = "mhdptx"; 139 clocks = <&mhdp_clock>; 140 phys = <&dp_phy>; 141 phy-names = "dpphy"; 142 interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>; 143 144 ports { 145 #address-cells = <1>; 146 #size-cells = <0>; 147 148 port@0 { 149 reg = <0>; 150 dp_bridge_input: endpoint { 151 remote-endpoint = <&xxx_dpi_output>; 152 }; 153 }; 154 155 port@4 { 156 reg = <4>; 157 dp_bridge_output: endpoint { 158 remote-endpoint = <&xxx_dp_connector_input>; 159 }; 160 }; 161 }; 162 }; 163 }; 164... 165