1Generic cpufreq driver
2
3It is a generic DT based cpufreq driver for frequency management.  It supports
4both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share
5clock and voltage across all CPUs.
6
7Both required and optional properties listed below must be defined
8under node /cpus/cpu@0.
9
10Required properties:
11- None
12
13Optional properties:
14- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for
15  details. OPPs *must* be supplied either via DT, i.e. this property, or
16  populated at runtime.
17- clock-latency: Specify the possible maximum transition latency for clock,
18  in unit of nanoseconds.
19- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
20- #cooling-cells:
21     Please refer to
22     Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
23
24Examples:
25
26cpus {
27	#address-cells = <1>;
28	#size-cells = <0>;
29
30	cpu@0 {
31		compatible = "arm,cortex-a9";
32		reg = <0>;
33		next-level-cache = <&L2>;
34		operating-points = <
35			/* kHz    uV */
36			792000  1100000
37			396000  950000
38			198000  850000
39		>;
40		clock-latency = <61036>; /* two CLK32 periods */
41		#cooling-cells = <2>;
42	};
43
44	cpu@1 {
45		compatible = "arm,cortex-a9";
46		reg = <1>;
47		next-level-cache = <&L2>;
48	};
49
50	cpu@2 {
51		compatible = "arm,cortex-a9";
52		reg = <2>;
53		next-level-cache = <&L2>;
54	};
55
56	cpu@3 {
57		compatible = "arm,cortex-a9";
58		reg = <3>;
59		next-level-cache = <&L2>;
60	};
61};
62