1Broadcom AVS mail box and interrupt register bindings
2=====================================================
3
4A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem)
5references the mailbox register used to communicate with the AVS CPU[1]. The
6second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on
7the AVS CPU. The interrupt tells the AVS CPU that it needs to process a
8command sent to it by a driver. Interrupting the AVS CPU is mandatory for
9commands to be processed.
10
11The interface also requires a reference to the AVS host interrupt controller,
12so a driver can react to interrupts generated by the AVS CPU whenever a command
13has been processed. See [2] for more information on the brcm,l2-intc node.
14
15[1] The AVS CPU is an independent co-processor that runs proprietary
16firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
17Adaptive Voltage Scaling.
18
19[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
20
21
22Node brcm,avs-cpu-data-mem
23--------------------------
24
25Required properties:
26- compatible: must include: brcm,avs-cpu-data-mem and
27              should include: one of brcm,bcm7271-avs-cpu-data-mem or
28                              brcm,bcm7268-avs-cpu-data-mem
29- reg: Specifies base physical address and size of the registers.
30- interrupts: The interrupt that the AVS CPU will use to interrupt the host
31              when a command completed.
32- interrupt-names: The name of the interrupt used to interrupt the host.
33
34Optional properties:
35- None
36
37Node brcm,avs-cpu-l2-intr
38-------------------------
39
40Required properties:
41- compatible: must include: brcm,avs-cpu-l2-intr and
42              should include: one of brcm,bcm7271-avs-cpu-l2-intr or
43                              brcm,bcm7268-avs-cpu-l2-intr
44- reg: Specifies base physical address and size of the registers.
45
46Optional properties:
47- None
48
49
50Example
51=======
52
53	avs_host_l2_intc: interrupt-controller@f04d1200 {
54		#interrupt-cells = <1>;
55		compatible = "brcm,l2-intc";
56		interrupt-parent = <&intc>;
57		reg = <0xf04d1200 0x48>;
58		interrupt-controller;
59		interrupts = <0x0 0x19 0x0>;
60		interrupt-names = "avs";
61	};
62
63	avs-cpu-data-mem@f04c4000 {
64		compatible = "brcm,bcm7271-avs-cpu-data-mem",
65				"brcm,avs-cpu-data-mem";
66		reg = <0xf04c4000 0x60>;
67		interrupts = <0x1a>;
68		interrupt-parent = <&avs_host_l2_intc>;
69		interrupt-names = "sw_intr";
70	};
71
72	avs-cpu-l2-intr@f04d1100 {
73		compatible = "brcm,bcm7271-avs-cpu-l2-intr",
74				"brcm,avs-cpu-l2-intr";
75		reg = <0xf04d1100 0x10>;
76	};
77