1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Reset Clock Controller Binding
8
9maintainers:
10  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
11
12description: |
13  The RCC IP is both a reset and a clock controller.
14  RCC makes also power management (resume/supend and wakeup interrupt).
15  Please also refer to reset.txt for common reset controller binding usage.
16
17  This binding uses common clock bindings
18  Documentation/devicetree/bindings/clock/clock-bindings.txt
19
20  Specifying clocks
21  =================
22
23  All available clocks are defined as preprocessor macros in
24  dt-bindings/clock/stm32mp1-clks.h header and can be used in device
25  tree sources.
26
27  Specifying softreset control of devices
28  =======================================
29
30  Device nodes should specify the reset channel required in their "resets"
31  property, containing a phandle to the reset device node and an index specifying
32  which channel to use.
33  The index is the bit number within the RCC registers bank, starting from RCC
34  base address.
35  It is calculated as: index = register_offset / 4 * 32 + bit_offset.
36  Where bit_offset is the bit offset within the register.
37
38  For example on STM32MP1, for LTDC reset:
39     ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
40          = 0x180 / 4 * 32 + 0 = 3072
41
42  The list of valid indices for STM32MP1 is available in:
43  include/dt-bindings/reset-controller/stm32mp1-resets.h
44  include/dt-bindings/reset-controller/stm32mp13-resets.h
45
46  This file implements defines like:
47  #define LTDC_R	3072
48
49properties:
50  "#clock-cells":
51    const: 1
52
53  "#reset-cells":
54    const: 1
55
56  compatible:
57    items:
58      - enum:
59          - st,stm32mp1-rcc-secure
60          - st,stm32mp1-rcc
61          - st,stm32mp13-rcc
62      - const: syscon
63  clocks: true
64  clock-names: true
65
66  reg:
67    maxItems: 1
68
69required:
70  - "#clock-cells"
71  - "#reset-cells"
72  - compatible
73  - reg
74
75if:
76  properties:
77    compatible:
78      contains:
79        enum:
80          - st,stm32mp1-rcc-secure
81then:
82  properties:
83    clocks:
84      description: Specifies oscillators.
85      maxItems: 5
86
87    clock-names:
88      items:
89        - const: hse
90        - const: hsi
91        - const: csi
92        - const: lse
93        - const: lsi
94  required:
95    - clocks
96    - clock-names
97else:
98  properties:
99    clocks:
100      description:
101        Specifies the external RX clock for ethernet MAC.
102      maxItems: 1
103
104    clock-names:
105      const: ETH_RX_CLK/ETH_REF_CLK
106
107additionalProperties: false
108
109examples:
110  - |
111    #include <dt-bindings/clock/stm32mp1-clks.h>
112    rcc: rcc@50000000 {
113        compatible = "st,stm32mp1-rcc-secure", "syscon";
114        reg = <0x50000000 0x1000>;
115        #clock-cells = <1>;
116        #reset-cells = <1>;
117        clock-names = "hse", "hsi", "csi", "lse", "lsi";
118        clocks = <&scmi_clk CK_SCMI_HSE>,
119                 <&scmi_clk CK_SCMI_HSI>,
120                 <&scmi_clk CK_SCMI_CSI>,
121                 <&scmi_clk CK_SCMI_LSE>,
122                 <&scmi_clk CK_SCMI_LSI>;
123    };
124...
125