1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
8
9maintainers:
10  - Liu Ying <victor.liu@nxp.com>
11
12description: |
13  i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
14  sitting together with the PHYs.  It is not the same as the MSI bus coming
15  from i.MX8 System Controller Unit (SCU) which is used to control power,
16  clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
17
18  i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
19  that is, MSI clock and AHB clock, need to be enabled so that peripherals
20  connected to the bus can be accessed. Also, the bus is part of a power
21  domain. The power domain needs to be enabled before the peripherals can
22  be accessed.
23
24  Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
25  like I2C controller, PWM controller, MIPI DSI controller and Control and
26  Status Registers (CSR) module, are accessed through the bus.
27
28  The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
29  pixel link MSI bus controller and does not allow SCFW user to control it.
30  So, the controller's registers cannot be accessed by SCFW user. Hence,
31  the interrupts generated by the controller don't make any sense from SCFW
32  user's point of view.
33
34allOf:
35  - $ref: simple-pm-bus.yaml#
36
37# We need a select here so we don't match all nodes with 'simple-pm-bus'.
38select:
39  properties:
40    compatible:
41      contains:
42        enum:
43          - fsl,imx8qxp-display-pixel-link-msi-bus
44          - fsl,imx8qm-display-pixel-link-msi-bus
45  required:
46    - compatible
47
48properties:
49  compatible:
50    items:
51      - enum:
52          - fsl,imx8qxp-display-pixel-link-msi-bus
53          - fsl,imx8qm-display-pixel-link-msi-bus
54      - const: simple-pm-bus
55
56  reg:
57    maxItems: 1
58
59  interrupts:
60    maxItems: 1
61
62  clocks:
63    items:
64      - description: master gated clock from system
65      - description: AHB clock
66
67  clock-names:
68    items:
69      - const: msi
70      - const: ahb
71
72patternProperties:
73  "^.*@[0-9a-f]+$":
74    description: Devices attached to the bus
75    type: object
76    properties:
77      reg:
78        maxItems: 1
79
80    required:
81      - reg
82
83required:
84  - compatible
85  - reg
86  - clocks
87  - clock-names
88  - power-domains
89
90unevaluatedProperties: false
91
92examples:
93  - |
94    #include <dt-bindings/clock/imx8-lpcg.h>
95    #include <dt-bindings/firmware/imx/rsrc.h>
96    bus@56200000 {
97        compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
98        reg = <0x56200000 0x20000>;
99        #address-cells = <1>;
100        #size-cells = <1>;
101        interrupt-parent = <&dc0_irqsteer>;
102        interrupts = <320>;
103        ranges;
104        clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
105                 <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
106        clock-names = "msi", "ahb";
107        power-domains = <&pd IMX_SC_R_DC_0>;
108
109        syscon@56221000 {
110            compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
111            reg = <0x56221000 0x1000>;
112            clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
113            clock-names = "ipg";
114
115            pxl2dpi {
116                compatible = "fsl,imx8qxp-pxl2dpi";
117                fsl,sc-resource = <IMX_SC_R_MIPI_0>;
118                power-domains = <&pd IMX_SC_R_MIPI_0>;
119
120                ports {
121                    #address-cells = <1>;
122                    #size-cells = <0>;
123
124                    port@0 {
125                        #address-cells = <1>;
126                        #size-cells = <0>;
127                        reg = <0>;
128
129                        mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
130                            reg = <0>;
131                            remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
132                        };
133
134                        mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
135                            reg = <1>;
136                            remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
137                        };
138                    };
139
140                    port@1 {
141                        #address-cells = <1>;
142                        #size-cells = <0>;
143                        reg = <1>;
144
145                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
146                            reg = <0>;
147                            remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
148                        };
149
150                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
151                            reg = <1>;
152                            remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
153                        };
154                    };
155                };
156            };
157
158            ldb {
159                #address-cells = <1>;
160                #size-cells = <0>;
161                compatible = "fsl,imx8qxp-ldb";
162                clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
163                         <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
164                clock-names = "pixel", "bypass";
165                power-domains = <&pd IMX_SC_R_LVDS_0>;
166
167                channel@0 {
168                    #address-cells = <1>;
169                    #size-cells = <0>;
170                    reg = <0>;
171                    phys = <&mipi_lvds_0_phy>;
172                    phy-names = "lvds_phy";
173
174                    port@0 {
175                        reg = <0>;
176
177                        mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
178                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
179                        };
180                    };
181
182                    port@1 {
183                        reg = <1>;
184
185                        /* ... */
186                    };
187                };
188
189                channel@1 {
190                    #address-cells = <1>;
191                    #size-cells = <0>;
192                    reg = <1>;
193                    phys = <&mipi_lvds_0_phy>;
194                    phy-names = "lvds_phy";
195
196                    port@0 {
197                        reg = <0>;
198
199                        mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
200                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
201                        };
202                    };
203
204                    port@1 {
205                        reg = <1>;
206
207                        /* ... */
208                    };
209                };
210            };
211        };
212
213        clock-controller@56223004 {
214            compatible = "fsl,imx8qxp-lpcg";
215            reg = <0x56223004 0x4>;
216            #clock-cells = <1>;
217            clocks = <&mipi_lvds_0_ipg_clk>;
218            clock-indices = <IMX_LPCG_CLK_4>;
219            clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk";
220            power-domains = <&pd IMX_SC_R_MIPI_0>;
221        };
222
223        phy@56228300 {
224            compatible = "fsl,imx8qxp-mipi-dphy";
225            reg = <0x56228300 0x100>;
226            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
227            clock-names = "phy_ref";
228            #phy-cells = <0>;
229            fsl,syscon = <&mipi_lvds_0_csr>;
230            power-domains = <&pd IMX_SC_R_MIPI_0>;
231        };
232    };
233