1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/ata/sata-common.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Common Properties for Serial AT attachment (SATA) controllers
8
9maintainers:
10  - Linus Walleij <linus.walleij@linaro.org>
11
12description: |
13  This document defines device tree properties common to most Serial
14  AT attachment (SATA) storage devices. It doesn't constitute a device tree
15  binding specification by itself but is meant to be referenced by device
16  tree bindings.
17
18  The SATA controller-specific device tree bindings are responsible for
19  defining whether each property is required or optional.
20
21properties:
22  $nodename:
23    pattern: "^sata(@.*)?$"
24    description:
25      Specifies the host controller node. SATA host controller nodes are named
26      "sata"
27
28  "#address-cells":
29    const: 1
30
31  "#size-cells":
32    const: 0
33
34patternProperties:
35  "^sata-port@[0-9a-e]$":
36    description: |
37      DT nodes for ports connected on the SATA host. The SATA port
38      nodes will be named "sata-port".
39    type: object
40
41    properties:
42      reg:
43        minimum: 0
44        maximum: 14
45        description:
46          The ID number of the drive port SATA can potentially use a port
47          multiplier making it possible to connect up to 15 disks to a single
48          SATA port.
49
50...
51