1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/ata/pata-common.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Common Properties for Parallel AT attachment (PATA) controllers
8
9maintainers:
10  - Linus Walleij <linus.walleij@linaro.org>
11
12description: |
13  This document defines device tree properties common to most Parallel
14  ATA (PATA, also known as IDE) AT attachment storage devices.
15  It doesn't constitute a device tree binding specification by itself but is
16  meant to be referenced by device tree bindings.
17
18  The PATA (IDE) controller-specific device tree bindings are responsible for
19  defining whether each property is required or optional.
20
21properties:
22  $nodename:
23    pattern: "^ide(@.*)?$"
24    description:
25      Specifies the host controller node. PATA host controller nodes are named
26      "ide".
27
28  "#address-cells":
29    const: 1
30
31  "#size-cells":
32    const: 0
33
34patternProperties:
35  "^ide-port@[0-1]$":
36    description: |
37      DT nodes for ports connected on the PATA host. The master drive will have
38      ID number 0 and the slave drive will have ID number 1. The PATA port
39      nodes will be named "ide-port".
40    type: object
41
42    properties:
43      reg:
44        minimum: 0
45        maximum: 1
46        description:
47          The ID number of the drive port, 0 for the master port and 1 for the
48          slave port.
49
50additionalProperties: true
51
52...
53