1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/ata/faraday,ftide010.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Faraday Technology FTIDE010 PATA controller
8
9maintainers:
10  - Linus Walleij <linus.walleij@linaro.org>
11
12description: |
13  This controller is the first Faraday IDE interface block, used in the
14  StorLink SL3512 and SL3516, later known as the Cortina Systems Gemini
15  platform. The controller can do PIO modes 0 through 4, Multi-word DMA
16  (MWDM) modes 0 through 2 and Ultra DMA modes 0 through 6.
17
18  On the Gemini platform, this PATA block is accompanied by a PATA to
19  SATA bridge in order to support SATA. This is why a phandle to that
20  controller is compulsory on that platform.
21
22  The timing properties are unique per-SoC, not per-board.
23
24properties:
25  compatible:
26    oneOf:
27      - const: faraday,ftide010
28      - items:
29          - const: cortina,gemini-pata
30          - const: faraday,ftide010
31
32  reg:
33    maxItems: 1
34
35  interrupts:
36    maxItems: 1
37
38  clocks:
39    minItems: 1
40
41  clock-names:
42    const: PCLK
43
44  sata:
45    description:
46      phandle to the Gemini PATA to SATA bridge, if available
47    $ref: /schemas/types.yaml#/definitions/phandle
48
49required:
50  - compatible
51  - reg
52  - interrupts
53
54allOf:
55  - $ref: pata-common.yaml#
56
57  - if:
58      properties:
59        compatible:
60          contains:
61            const: cortina,gemini-pata
62
63    then:
64      required:
65        - sata
66
67unevaluatedProperties: false
68
69examples:
70  - |
71    #include <dt-bindings/interrupt-controller/irq.h>
72    #include <dt-bindings/clock/cortina,gemini-clock.h>
73
74    ide@63000000 {
75      compatible = "cortina,gemini-pata", "faraday,ftide010";
76      reg = <0x63000000 0x100>;
77      interrupts = <4 IRQ_TYPE_EDGE_RISING>;
78      clocks = <&gcc GEMINI_CLK_GATE_IDE>;
79      clock-names = "PCLK";
80      sata = <&sata>;
81      #address-cells = <1>;
82      #size-cells = <0>;
83      ide-port@0 {
84        reg = <0>;
85      };
86      ide-port@1 {
87        reg = <1>;
88      };
89    };
90
91...
92