xref: /openbmc/linux/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml (revision 064f14e9)

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Baikal-T1 SoC AHCI SATA controller

maintainers:
  - Serge Semin <fancer.lancer@gmail.com>

description:
  AHCI SATA controller embedded into the Baikal-T1 SoC is based on the
  DWC AHCI SATA v4.10a IP-core.

allOf:
  - $ref: snps,dwc-ahci-common.yaml#

properties:
  compatible:
    const: baikal,bt1-ahci

  clocks:
    items:
      - description: Peripheral APB bus clock
      - description: Application AXI BIU clock
      - description: SATA Ports reference clock

  clock-names:
    items:
      - const: pclk
      - const: aclk
      - const: ref

  resets:
    items:
      - description: Application AXI BIU domain reset
      - description: SATA Ports clock domain reset

  reset-names:
    items:
      - const: arst
      - const: ref

  ports-implemented:
    maximum: 0x3

patternProperties:
  "^sata-port@[0-1]$":
    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port

    properties:
      reg:
        minimum: 0
        maximum: 1

      snps,tx-ts-max:
        $ref: /schemas/types.yaml#/definitions/uint32
        description:
          Due to having AXI3 bus interface utilized the maximum Tx DMA
          transaction size can't exceed 16 beats (AxLEN[3:0]).
        enum: [ 1, 2, 4, 8, 16 ]

      snps,rx-ts-max:
        $ref: /schemas/types.yaml#/definitions/uint32
        description:
          Due to having AXI3 bus interface utilized the maximum Rx DMA
          transaction size can't exceed 16 beats (AxLEN[3:0]).
        enum: [ 1, 2, 4, 8, 16 ]

    unevaluatedProperties: false

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - resets

unevaluatedProperties: false

examples:
  - |
    sata@1f050000 {
      compatible = "baikal,bt1-ahci";
      reg = <0x1f050000 0x2000>;
      #address-cells = <1>;
      #size-cells = <0>;

      interrupts = <0 64 4>;

      clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>;
      clock-names = "pclk", "aclk", "ref";

      resets = <&ccu_axi 2>, <&ccu_sys 0>;
      reset-names = "arst", "ref";

      ports-implemented = <0x3>;

      sata-port@0 {
        reg = <0>;

        snps,tx-ts-max = <4>;
        snps,rx-ts-max = <4>;
      };

      sata-port@1 {
        reg = <1>;

        snps,tx-ts-max = <4>;
        snps,rx-ts-max = <4>;
      };
    };
...