1STMicroelectronics STi SATA controller
2
3This binding describes a SATA device.
4
5Required properties:
6 - compatible	   : Must be "st,sti-ahci"
7 - reg		   : Physical base addresses and length of register sets
8 - interrupts	   : Interrupt associated with the SATA device
9 - interrupt-names :   Associated name must be; "hostc"
10 - resets	   : The power-down and soft-reset lines of SATA IP
11 - reset-names	   :   Associated names must be; "pwr-dwn" and "sw-rst"
12 - clocks	   : The phandle for the clock
13 - clock-names	   :   Associated name must be; "ahci_clk"
14 - phys		   : The phandle for the PHY device
15 - phy-names	   :   Associated name must be; "ahci_phy"
16
17Example:
18
19	sata0: sata@fe380000 {
20		compatible      = "st,sti-ahci";
21		reg             = <0xfe380000 0x1000>;
22		interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
23		interrupt-names = "hostc";
24		phys	        = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
25		phy-names       = "ahci_phy";
26		resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
27				  <&softreset STIH416_SATA0_SOFTRESET>;
28		reset-names     = "pwr-dwn", "sw-rst";
29		clocks	        = <&clk_s_a0_ls CLK_ICN_REG>;
30		clock-names     = "ahci_clk";
31	};
32