1========= 2dm-verity 3========= 4 5Device-Mapper's "verity" target provides transparent integrity checking of 6block devices using a cryptographic digest provided by the kernel crypto API. 7This target is read-only. 8 9Construction Parameters 10======================= 11 12:: 13 14 <version> <dev> <hash_dev> 15 <data_block_size> <hash_block_size> 16 <num_data_blocks> <hash_start_block> 17 <algorithm> <digest> <salt> 18 [<#opt_params> <opt_params>] 19 20<version> 21 This is the type of the on-disk hash format. 22 23 0 is the original format used in the Chromium OS. 24 The salt is appended when hashing, digests are stored continuously and 25 the rest of the block is padded with zeroes. 26 27 1 is the current format that should be used for new devices. 28 The salt is prepended when hashing and each digest is 29 padded with zeroes to the power of two. 30 31<dev> 32 This is the device containing data, the integrity of which needs to be 33 checked. It may be specified as a path, like /dev/sdaX, or a device number, 34 <major>:<minor>. 35 36<hash_dev> 37 This is the device that supplies the hash tree data. It may be 38 specified similarly to the device path and may be the same device. If the 39 same device is used, the hash_start should be outside the configured 40 dm-verity device. 41 42<data_block_size> 43 The block size on a data device in bytes. 44 Each block corresponds to one digest on the hash device. 45 46<hash_block_size> 47 The size of a hash block in bytes. 48 49<num_data_blocks> 50 The number of data blocks on the data device. Additional blocks are 51 inaccessible. You can place hashes to the same partition as data, in this 52 case hashes are placed after <num_data_blocks>. 53 54<hash_start_block> 55 This is the offset, in <hash_block_size>-blocks, from the start of hash_dev 56 to the root block of the hash tree. 57 58<algorithm> 59 The cryptographic hash algorithm used for this device. This should 60 be the name of the algorithm, like "sha1". 61 62<digest> 63 The hexadecimal encoding of the cryptographic hash of the root hash block 64 and the salt. This hash should be trusted as there is no other authenticity 65 beyond this point. 66 67<salt> 68 The hexadecimal encoding of the salt value. 69 70<#opt_params> 71 Number of optional parameters. If there are no optional parameters, 72 the optional paramaters section can be skipped or #opt_params can be zero. 73 Otherwise #opt_params is the number of following arguments. 74 75 Example of optional parameters section: 76 1 ignore_corruption 77 78ignore_corruption 79 Log corrupted blocks, but allow read operations to proceed normally. 80 81restart_on_corruption 82 Restart the system when a corrupted block is discovered. This option is 83 not compatible with ignore_corruption and requires user space support to 84 avoid restart loops. 85 86panic_on_corruption 87 Panic the device when a corrupted block is discovered. This option is 88 not compatible with ignore_corruption and restart_on_corruption. 89 90ignore_zero_blocks 91 Do not verify blocks that are expected to contain zeroes and always return 92 zeroes instead. This may be useful if the partition contains unused blocks 93 that are not guaranteed to contain zeroes. 94 95use_fec_from_device <fec_dev> 96 Use forward error correction (FEC) to recover from corruption if hash 97 verification fails. Use encoding data from the specified device. This 98 may be the same device where data and hash blocks reside, in which case 99 fec_start must be outside data and hash areas. 100 101 If the encoding data covers additional metadata, it must be accessible 102 on the hash device after the hash blocks. 103 104 Note: block sizes for data and hash devices must match. Also, if the 105 verity <dev> is encrypted the <fec_dev> should be too. 106 107fec_roots <num> 108 Number of generator roots. This equals to the number of parity bytes in 109 the encoding data. For example, in RS(M, N) encoding, the number of roots 110 is M-N. 111 112fec_blocks <num> 113 The number of encoding data blocks on the FEC device. The block size for 114 the FEC device is <data_block_size>. 115 116fec_start <offset> 117 This is the offset, in <data_block_size> blocks, from the start of the 118 FEC device to the beginning of the encoding data. 119 120check_at_most_once 121 Verify data blocks only the first time they are read from the data device, 122 rather than every time. This reduces the overhead of dm-verity so that it 123 can be used on systems that are memory and/or CPU constrained. However, it 124 provides a reduced level of security because only offline tampering of the 125 data device's content will be detected, not online tampering. 126 127 Hash blocks are still verified each time they are read from the hash device, 128 since verification of hash blocks is less performance critical than data 129 blocks, and a hash block will not be verified any more after all the data 130 blocks it covers have been verified anyway. 131 132root_hash_sig_key_desc <key_description> 133 This is the description of the USER_KEY that the kernel will lookup to get 134 the pkcs7 signature of the roothash. The pkcs7 signature is used to validate 135 the root hash during the creation of the device mapper block device. 136 Verification of roothash depends on the config DM_VERITY_VERIFY_ROOTHASH_SIG 137 being set in the kernel. 138 139Theory of operation 140=================== 141 142dm-verity is meant to be set up as part of a verified boot path. This 143may be anything ranging from a boot using tboot or trustedgrub to just 144booting from a known-good device (like a USB drive or CD). 145 146When a dm-verity device is configured, it is expected that the caller 147has been authenticated in some way (cryptographic signatures, etc). 148After instantiation, all hashes will be verified on-demand during 149disk access. If they cannot be verified up to the root node of the 150tree, the root hash, then the I/O will fail. This should detect 151tampering with any data on the device and the hash data. 152 153Cryptographic hashes are used to assert the integrity of the device on a 154per-block basis. This allows for a lightweight hash computation on first read 155into the page cache. Block hashes are stored linearly, aligned to the nearest 156block size. 157 158If forward error correction (FEC) support is enabled any recovery of 159corrupted data will be verified using the cryptographic hash of the 160corresponding data. This is why combining error correction with 161integrity checking is essential. 162 163Hash Tree 164--------- 165 166Each node in the tree is a cryptographic hash. If it is a leaf node, the hash 167of some data block on disk is calculated. If it is an intermediary node, 168the hash of a number of child nodes is calculated. 169 170Each entry in the tree is a collection of neighboring nodes that fit in one 171block. The number is determined based on block_size and the size of the 172selected cryptographic digest algorithm. The hashes are linearly-ordered in 173this entry and any unaligned trailing space is ignored but included when 174calculating the parent node. 175 176The tree looks something like: 177 178 alg = sha256, num_blocks = 32768, block_size = 4096 179 180:: 181 182 [ root ] 183 / . . . \ 184 [entry_0] [entry_1] 185 / . . . \ . . . \ 186 [entry_0_0] . . . [entry_0_127] . . . . [entry_1_127] 187 / ... \ / . . . \ / \ 188 blk_0 ... blk_127 blk_16256 blk_16383 blk_32640 . . . blk_32767 189 190 191On-disk format 192============== 193 194The verity kernel code does not read the verity metadata on-disk header. 195It only reads the hash blocks which directly follow the header. 196It is expected that a user-space tool will verify the integrity of the 197verity header. 198 199Alternatively, the header can be omitted and the dmsetup parameters can 200be passed via the kernel command-line in a rooted chain of trust where 201the command-line is verified. 202 203Directly following the header (and with sector number padded to the next hash 204block boundary) are the hash blocks which are stored a depth at a time 205(starting from the root), sorted in order of increasing index. 206 207The full specification of kernel parameters and on-disk metadata format 208is available at the cryptsetup project's wiki page 209 210 https://gitlab.com/cryptsetup/cryptsetup/wikis/DMVerity 211 212Status 213====== 214V (for Valid) is returned if every check performed so far was valid. 215If any check failed, C (for Corruption) is returned. 216 217Example 218======= 219Set up a device:: 220 221 # dmsetup create vroot --readonly --table \ 222 "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\ 223 "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\ 224 "1234000000000000000000000000000000000000000000000000000000000000" 225 226A command line tool veritysetup is available to compute or verify 227the hash tree or activate the kernel device. This is available from 228the cryptsetup upstream repository https://gitlab.com/cryptsetup/cryptsetup/ 229(as a libcryptsetup extension). 230 231Create hash on the device:: 232 233 # veritysetup format /dev/sda1 /dev/sda2 234 ... 235 Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 236 237Activate the device:: 238 239 # veritysetup create vroot /dev/sda1 /dev/sda2 \ 240 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 241