1.. SPDX-License-Identifier: GPL-2.0
2
3============================================
4Accessing PCI device resources through sysfs
5============================================
6
7sysfs, usually mounted at /sys, provides access to PCI resources on platforms
8that support it.  For example, a given bus might look like this::
9
10     /sys/devices/pci0000:17
11     |-- 0000:17:00.0
12     |   |-- class
13     |   |-- config
14     |   |-- device
15     |   |-- enable
16     |   |-- irq
17     |   |-- local_cpus
18     |   |-- remove
19     |   |-- resource
20     |   |-- resource0
21     |   |-- resource1
22     |   |-- resource2
23     |   |-- revision
24     |   |-- rom
25     |   |-- subsystem_device
26     |   |-- subsystem_vendor
27     |   `-- vendor
28     `-- ...
29
30The topmost element describes the PCI domain and bus number.  In this case,
31the domain number is 0000 and the bus number is 17 (both values are in hex).
32This bus contains a single function device in slot 0.  The domain and bus
33numbers are reproduced for convenience.  Under the device directory are several
34files, each with their own function.
35
36       =================== =====================================================
37       file		   function
38       =================== =====================================================
39       class		   PCI class (ascii, ro)
40       config		   PCI config space (binary, rw)
41       device		   PCI device (ascii, ro)
42       enable	           Whether the device is enabled (ascii, rw)
43       irq		   IRQ number (ascii, ro)
44       local_cpus	   nearby CPU mask (cpumask, ro)
45       remove		   remove device from kernel's list (ascii, wo)
46       resource		   PCI resource host addresses (ascii, ro)
47       resource0..N	   PCI resource N, if present (binary, mmap, rw\ [1]_)
48       resource0_wc..N_wc  PCI WC map resource N, if prefetchable (binary, mmap)
49       revision		   PCI revision (ascii, ro)
50       rom		   PCI ROM resource, if present (binary, ro)
51       subsystem_device	   PCI subsystem device (ascii, ro)
52       subsystem_vendor	   PCI subsystem vendor (ascii, ro)
53       vendor		   PCI vendor (ascii, ro)
54       =================== =====================================================
55
56::
57
58  ro - read only file
59  rw - file is readable and writable
60  wo - write only file
61  mmap - file is mmapable
62  ascii - file contains ascii text
63  binary - file contains binary data
64  cpumask - file contains a cpumask type
65
66.. [1] rw for IORESOURCE_IO (I/O port) regions only
67
68The read only files are informational, writes to them will be ignored, with
69the exception of the 'rom' file.  Writable files can be used to perform
70actions on the device (e.g. changing config space, detaching a device).
71mmapable files are available via an mmap of the file at offset 0 and can be
72used to do actual device programming from userspace.  Note that some platforms
73don't support mmapping of certain resources, so be sure to check the return
74value from any attempted mmap.  The most notable of these are I/O port
75resources, which also provide read/write access.
76
77The 'enable' file provides a counter that indicates how many times the device
78has been enabled.  If the 'enable' file currently returns '4', and a '1' is
79echoed into it, it will then return '5'.  Echoing a '0' into it will decrease
80the count.  Even when it returns to 0, though, some of the initialisation
81may not be reversed.
82
83The 'rom' file is special in that it provides read-only access to the device's
84ROM file, if available.  It's disabled by default, however, so applications
85should write the string "1" to the file to enable it before attempting a read
86call, and disable it following the access by writing "0" to the file.  Note
87that the device must be enabled for a rom read to return data successfully.
88In the event a driver is not bound to the device, it can be enabled using the
89'enable' file, documented above.
90
91The 'remove' file is used to remove the PCI device, by writing a non-zero
92integer to the file.  This does not involve any kind of hot-plug functionality,
93e.g. powering off the device.  The device is removed from the kernel's list of
94PCI devices, the sysfs directory for it is removed, and the device will be
95removed from any drivers attached to it. Removal of PCI root buses is
96disallowed.
97
98Accessing legacy resources through sysfs
99----------------------------------------
100
101Legacy I/O port and ISA memory resources are also provided in sysfs if the
102underlying platform supports them.  They're located in the PCI class hierarchy,
103e.g.::
104
105	/sys/class/pci_bus/0000:17/
106	|-- bridge -> ../../../devices/pci0000:17
107	|-- cpuaffinity
108	|-- legacy_io
109	`-- legacy_mem
110
111The legacy_io file is a read/write file that can be used by applications to
112do legacy port I/O.  The application should open the file, seek to the desired
113port (e.g. 0x3e8) and do a read or a write of 1, 2 or 4 bytes.  The legacy_mem
114file should be mmapped with an offset corresponding to the memory offset
115desired, e.g. 0xa0000 for the VGA frame buffer.  The application can then
116simply dereference the returned pointer (after checking for errors of course)
117to access legacy memory space.
118
119Supporting PCI access on new platforms
120--------------------------------------
121
122In order to support PCI resource mapping as described above, Linux platform
123code should ideally define ARCH_GENERIC_PCI_MMAP_RESOURCE and use the generic
124implementation of that functionality. To support the historical interface of
125mmap() through files in /proc/bus/pci, platforms may also set HAVE_PCI_MMAP.
126
127Alternatively, platforms which set HAVE_PCI_MMAP may provide their own
128implementation of pci_mmap_resource_range() instead of defining
129ARCH_GENERIC_PCI_MMAP_RESOURCE.
130
131Platforms which support write-combining maps of PCI resources must define
132arch_can_pci_mmap_wc() which shall evaluate to non-zero at runtime when
133write-combining is permitted. Platforms which support maps of I/O resources
134define arch_can_pci_mmap_io() similarly.
135
136Legacy resources are protected by the HAVE_PCI_LEGACY define.  Platforms
137wishing to support legacy functionality should define it and provide
138pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
139