1What: /sys/power/ 2Date: August 2006 3Contact: Rafael J. Wysocki <rjw@sisk.pl> 4Description: 5 The /sys/power directory will contain files that will 6 provide a unified interface to the power management 7 subsystem. 8 9What: /sys/power/state 10Date: August 2006 11Contact: Rafael J. Wysocki <rjw@sisk.pl> 12Description: 13 The /sys/power/state file controls the system power state. 14 Reading from this file returns what states are supported, 15 which is hard-coded to 'standby' (Power-On Suspend), 'mem' 16 (Suspend-to-RAM), and 'disk' (Suspend-to-Disk). 17 18 Writing to this file one of these strings causes the system to 19 transition into that state. Please see the file 20 Documentation/power/states.txt for a description of each of 21 these states. 22 23What: /sys/power/disk 24Date: September 2006 25Contact: Rafael J. Wysocki <rjw@sisk.pl> 26Description: 27 The /sys/power/disk file controls the operating mode of the 28 suspend-to-disk mechanism. Reading from this file returns 29 the name of the method by which the system will be put to 30 sleep on the next suspend. There are four methods supported: 31 'firmware' - means that the memory image will be saved to disk 32 by some firmware, in which case we also assume that the 33 firmware will handle the system suspend. 34 'platform' - the memory image will be saved by the kernel and 35 the system will be put to sleep by the platform driver (e.g. 36 ACPI or other PM registers). 37 'shutdown' - the memory image will be saved by the kernel and 38 the system will be powered off. 39 'reboot' - the memory image will be saved by the kernel and 40 the system will be rebooted. 41 42 Additionally, /sys/power/disk can be used to turn on one of the 43 two testing modes of the suspend-to-disk mechanism: 'testproc' 44 or 'test'. If the suspend-to-disk mechanism is in the 45 'testproc' mode, writing 'disk' to /sys/power/state will cause 46 the kernel to disable nonboot CPUs and freeze tasks, wait for 5 47 seconds, unfreeze tasks and enable nonboot CPUs. If it is in 48 the 'test' mode, writing 'disk' to /sys/power/state will cause 49 the kernel to disable nonboot CPUs and freeze tasks, shrink 50 memory, suspend devices, wait for 5 seconds, resume devices, 51 unfreeze tasks and enable nonboot CPUs. Then, we are able to 52 look in the log messages and work out, for example, which code 53 is being slow and which device drivers are misbehaving. 54 55 The suspend-to-disk method may be chosen by writing to this 56 file one of the accepted strings: 57 58 'firmware' 59 'platform' 60 'shutdown' 61 'reboot' 62 'testproc' 63 'test' 64 65 It will only change to 'firmware' or 'platform' if the system 66 supports that. 67 68What: /sys/power/image_size 69Date: August 2006 70Contact: Rafael J. Wysocki <rjw@sisk.pl> 71Description: 72 The /sys/power/image_size file controls the size of the image 73 created by the suspend-to-disk mechanism. It can be written a 74 string representing a non-negative integer that will be used 75 as an upper limit of the image size, in bytes. The kernel's 76 suspend-to-disk code will do its best to ensure the image size 77 will not exceed this number. However, if it turns out to be 78 impossible, the kernel will try to suspend anyway using the 79 smallest image possible. In particular, if "0" is written to 80 this file, the suspend image will be as small as possible. 81 82 Reading from this file will display the current image size 83 limit, which is set to 500 MB by default. 84 85What: /sys/power/pm_trace 86Date: August 2006 87Contact: Rafael J. Wysocki <rjw@sisk.pl> 88Description: 89 The /sys/power/pm_trace file controls the code which saves the 90 last PM event point in the RTC across reboots, so that you can 91 debug a machine that just hangs during suspend (or more 92 commonly, during resume). Namely, the RTC is only used to save 93 the last PM event point if this file contains '1'. Initially 94 it contains '0' which may be changed to '1' by writing a 95 string representing a nonzero integer into it. 96 97 To use this debugging feature you should attempt to suspend 98 the machine, then reboot it and run 99 100 dmesg -s 1000000 | grep 'hash matches' 101 102 CAUTION: Using it will cause your machine's real-time (CMOS) 103 clock to be set to a random invalid time after a resume. 104 105What: /sys/power/pm_async 106Date: January 2009 107Contact: Rafael J. Wysocki <rjw@sisk.pl> 108Description: 109 The /sys/power/pm_async file controls the switch allowing the 110 user space to enable or disable asynchronous suspend and resume 111 of devices. If enabled, this feature will cause some device 112 drivers' suspend and resume callbacks to be executed in parallel 113 with each other and with the main suspend thread. It is enabled 114 if this file contains "1", which is the default. It may be 115 disabled by writing "0" to this file, in which case all devices 116 will be suspended and resumed synchronously. 117 118What: /sys/power/wakeup_count 119Date: July 2010 120Contact: Rafael J. Wysocki <rjw@sisk.pl> 121Description: 122 The /sys/power/wakeup_count file allows user space to put the 123 system into a sleep state while taking into account the 124 concurrent arrival of wakeup events. Reading from it returns 125 the current number of registered wakeup events and it blocks if 126 some wakeup events are being processed at the time the file is 127 read from. Writing to it will only succeed if the current 128 number of wakeup events is equal to the written value and, if 129 successful, will make the kernel abort a subsequent transition 130 to a sleep state if any wakeup events are reported after the 131 write has returned. 132