1What:		/sys/devices/platform/kim/dev_name
2Date:		January 2010
3KernelVersion:	2.6.38
4Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
5Description:
6		Name of the UART device at which the WL128x chip
7		is connected. example: "/dev/ttyS0".
8
9		The device name flows down to architecture specific board
10		initialization file from the ATAGS bootloader
11		firmware. The name exposed is read from the user-space
12		dameon and opens the device when install is requested.
13
14What:		/sys/devices/platform/kim/baud_rate
15Date:		January 2010
16KernelVersion:	2.6.38
17Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
18Description:
19		The maximum reliable baud-rate the host can support.
20		Different platforms tend to have different high-speed
21		UART configurations, so the baud-rate needs to be set
22		locally and also sent across to the WL128x via a HCI-VS
23		command. The entry is read and made use by the user-space
24		daemon when the ldisc install is requested.
25
26What:		/sys/devices/platform/kim/flow_cntrl
27Date:		January 2010
28KernelVersion:	2.6.38
29Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
30Description:
31		The WL128x makes use of flow control mechanism, and this
32		entry most often should be 1, the host's UART is required
33		to have the capability of flow-control, or else this
34		entry can be made use of for exceptions.
35
36What:		/sys/devices/platform/kim/install
37Date:		January 2010
38KernelVersion:	2.6.38
39Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
40Description:
41		When one of the protocols Bluetooth, FM or GPS wants to make
42		use of the shared UART transport, it registers to the shared
43		transport driver, which will signal the user-space for opening,
44		configuring baud and install line discipline via this sysfs
45		entry. This entry would be polled upon by the user-space
46		daemon managing the UART, and is notified about the change
47		by the sysfs_notify. The value would be '1' when UART needs
48		to be opened/ldisc installed, and would be '0' when UART
49		is no more required and needs to be closed.
50