1What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed
2Date:		April 2010
3KernelVersion:	2.6.35
4Contact:	linux-bluetooth@vger.kernel.org
5Description:
6		The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file
7		controls reporting speed of Wacom bluetooth tablet. Reading
8		from this file returns 1 if tablet reports in high speed mode
9		or 0 otherwise. Writing to this file one of these values
10		switches reporting speed.
11
12What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/led
13Date:		August 2014
14Contact:	linux-input@vger.kernel.org
15Description:
16		Attribute group for control of the status LEDs and the OLEDs.
17		This attribute group is only available for Intuos 4 M, L,
18		and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only),
19		Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD
20		(LEDs only). Therefore its presence implicitly signifies the
21		presence of said LEDs and OLEDs on the tablet device.
22
23What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status0_luminance
24Date:		August 2014
25Contact:	linux-input@vger.kernel.org
26Description:
27		<obsoleted by the LED class API now exported by the driver>
28		Writing to this file sets the status LED luminance (1..127)
29		when the stylus does not touch the tablet surface, and no
30		button is pressed on the stylus. This luminance level is
31		normally lower than the level when a button is pressed.
32
33What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status1_luminance
34Date:		August 2014
35Contact:	linux-input@vger.kernel.org
36Description:
37		<obsoleted by the LED class API now exported by the driver>
38		Writing to this file sets the status LED luminance (1..127)
39		when the stylus touches the tablet surface, or any button is
40		pressed on the stylus.
41
42What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led0_select
43Date:		August 2014
44Contact:	linux-input@vger.kernel.org
45Description:
46		<obsoleted by the LED class API now exported by the driver>
47		Writing to this file sets which one of the four (for Intuos 4
48		and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq
49		24HD) status LEDs is active (0..3). The other three LEDs on the
50		same side are always inactive.
51
52What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led1_select
53Date:		August 2014
54Contact:	linux-input@vger.kernel.org
55Description:
56		<obsoleted by the LED class API now exported by the driver>
57		Writing to this file sets which one of the left four (for Cintiq 21UX2
58		and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
59		the left are always inactive.
60
61What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/buttons_luminance
62Date:		August 2014
63Contact:	linux-input@vger.kernel.org
64Description:
65		Writing to this file sets the overall luminance level (0..15)
66		of all eight button OLED displays.
67
68What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/button<n>_rawimg
69Date:		August 2014
70Contact:	linux-input@vger.kernel.org
71Description:
72		When writing a 1024 byte raw image in Wacom Intuos 4
73		interleaving format to the file, the image shows up on Button N
74		of the device. The image is a 64x32 pixel 4-bit gray image. The
75		1024 byte binary is split up into 16x 64 byte chunks. Each 64
76		byte chunk encodes the image data for two consecutive lines on
77		the display. The low nibble of each byte contains the first
78		line, and the high nibble contains the second line.
79		When the Wacom Intuos 4 is connected over Bluetooth, the
80		image has to contain 256 bytes (64x32 px 1 bit colour).
81		The format is also scrambled, like in the USB mode, and it can
82		be summarized by converting::
83
84					    76543210 into GECA6420.
85					    HGFEDCBA      HFDB7531
86
87What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote
88Date:		July 2015
89Contact:	linux-input@vger.kernel.org
90Description:
91		Writing the character sequence '*' followed by a newline to
92		this file will delete all of the current pairings on the
93		device. Other character sequences are reserved. This file is
94		write only.
95
96What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode
97Date:		July 2015
98Contact:	linux-input@vger.kernel.org
99Description:
100		<obsoleted by the LED class API now exported by the driver>
101		Reading from this file reports the mode status of the
102		remote as indicated by the LED lights on the device. If no
103		reports have been received from the paired device, reading
104		from this file will report '-1'. The mode is read-only
105		and cannot be set through the driver.
106