1**General Properties** 2 3What: /sys/class/power_supply/<supply_name>/manufacturer 4Date: May 2007 5Contact: linux-pm@vger.kernel.org 6Description: 7 Reports the name of the device manufacturer. 8 9 Access: Read 10 Valid values: Represented as string 11 12What: /sys/class/power_supply/<supply_name>/model_name 13Date: May 2007 14Contact: linux-pm@vger.kernel.org 15Description: 16 Reports the name of the device model. 17 18 Access: Read 19 Valid values: Represented as string 20 21What: /sys/class/power_supply/<supply_name>/serial_number 22Date: January 2008 23Contact: linux-pm@vger.kernel.org 24Description: 25 Reports the serial number of the device. 26 27 Access: Read 28 Valid values: Represented as string 29 30What: /sys/class/power_supply/<supply_name>/type 31Date: May 2010 32Contact: linux-pm@vger.kernel.org 33Description: 34 Describes the main type of the supply. 35 36 Access: Read 37 Valid values: "Battery", "UPS", "Mains", "USB", "Wireless" 38 39**Battery and USB properties** 40 41What: /sys/class/power_supply/<supply_name>/current_avg 42Date: May 2007 43Contact: linux-pm@vger.kernel.org 44Description: 45 Battery: 46 47 Reports an average IBAT current reading for the battery, over 48 a fixed period. Normally devices will provide a fixed interval 49 in which they average readings to smooth out the reported 50 value. 51 52 USB: 53 54 Reports an average IBUS current reading over a fixed period. 55 Normally devices will provide a fixed interval in which they 56 average readings to smooth out the reported value. 57 58 Access: Read 59 60 Valid values: Represented in microamps. Negative values are 61 used for discharging batteries, positive values for charging 62 batteries and for USB IBUS current. 63 64What: /sys/class/power_supply/<supply_name>/current_max 65Date: October 2010 66Contact: linux-pm@vger.kernel.org 67Description: 68 Battery: 69 70 Reports the maximum IBAT current allowed into the battery. 71 72 USB: 73 74 Reports the maximum IBUS current the supply can support. 75 76 Access: Read 77 Valid values: Represented in microamps 78 79What: /sys/class/power_supply/<supply_name>/current_now 80Date: May 2007 81Contact: linux-pm@vger.kernel.org 82Description: 83 84 Battery: 85 86 Reports an instant, single IBAT current reading for the 87 battery. This value is not averaged/smoothed. 88 89 Access: Read 90 91 USB: 92 93 Reports the IBUS current supplied now. This value is generally 94 read-only reporting, unless the 'online' state of the supply 95 is set to be programmable, in which case this value can be set 96 within the reported min/max range. 97 98 Access: Read, Write 99 100 Valid values: Represented in microamps. Negative values are 101 used for discharging batteries, positive values for charging 102 batteries and for USB IBUS current. 103 104What: /sys/class/power_supply/<supply_name>/temp 105Date: May 2007 106Contact: linux-pm@vger.kernel.org 107Description: 108 Battery: 109 110 Reports the current TBAT battery temperature reading. 111 112 USB: 113 114 Reports the current supply temperature reading. This would 115 normally be the internal temperature of the device itself 116 (e.g TJUNC temperature of an IC) 117 118 Access: Read 119 120 Valid values: Represented in 1/10 Degrees Celsius 121 122What: /sys/class/power_supply/<supply_name>/temp_alert_max 123Date: July 2012 124Contact: linux-pm@vger.kernel.org 125Description: 126 Battery: 127 128 Maximum TBAT temperature trip-wire value where the supply will 129 notify user-space of the event. 130 131 USB: 132 133 Maximum supply temperature trip-wire value where the supply 134 will notify user-space of the event. 135 136 This is normally used for the charging scenario where 137 user-space needs to know if the temperature has crossed an 138 upper threshold so it can take appropriate action (e.g. warning 139 user that the temperature is critically high, and charging has 140 stopped). 141 142 Access: Read 143 144 Valid values: Represented in 1/10 Degrees Celsius 145 146What: /sys/class/power_supply/<supply_name>/temp_alert_min 147Date: July 2012 148Contact: linux-pm@vger.kernel.org 149Description: 150 151 Battery: 152 153 Minimum TBAT temperature trip-wire value where the supply will 154 notify user-space of the event. 155 156 USB: 157 158 Minimum supply temperature trip-wire value where the supply 159 will notify user-space of the event. 160 161 This is normally used for the charging scenario where user-space 162 needs to know if the temperature has crossed a lower threshold 163 so it can take appropriate action (e.g. warning user that 164 temperature level is high, and charging current has been 165 reduced accordingly to remedy the situation). 166 167 Access: Read 168 169 Valid values: Represented in 1/10 Degrees Celsius 170 171What: /sys/class/power_supply/<supply_name>/temp_max 172Date: July 2014 173Contact: linux-pm@vger.kernel.org 174Description: 175 Battery: 176 177 Reports the maximum allowed TBAT battery temperature for 178 charging. 179 180 USB: 181 182 Reports the maximum allowed supply temperature for operation. 183 184 Access: Read 185 186 Valid values: Represented in 1/10 Degrees Celsius 187 188What: /sys/class/power_supply/<supply_name>/temp_min 189Date: July 2014 190Contact: linux-pm@vger.kernel.org 191Description: 192 Battery: 193 194 Reports the minimum allowed TBAT battery temperature for 195 charging. 196 197 USB: 198 199 Reports the minimum allowed supply temperature for operation. 200 201 Access: Read 202 203 Valid values: Represented in 1/10 Degrees Celsius 204 205What: /sys/class/power_supply/<supply_name>/voltage_max, 206Date: January 2008 207Contact: linux-pm@vger.kernel.org 208Description: 209 Battery: 210 211 Reports the maximum safe VBAT voltage permitted for the 212 battery, during charging. 213 214 USB: 215 216 Reports the maximum VBUS voltage the supply can support. 217 218 Access: Read 219 220 Valid values: Represented in microvolts 221 222What: /sys/class/power_supply/<supply_name>/voltage_min, 223Date: January 2008 224Contact: linux-pm@vger.kernel.org 225Description: 226 Battery: 227 228 Reports the minimum safe VBAT voltage permitted for the 229 battery, during discharging. 230 231 USB: 232 233 Reports the minimum VBUS voltage the supply can support. 234 235 Access: Read 236 237 Valid values: Represented in microvolts 238 239What: /sys/class/power_supply/<supply_name>/voltage_now, 240Date: May 2007 241Contact: linux-pm@vger.kernel.org 242Description: 243 Battery: 244 245 Reports an instant, single VBAT voltage reading for the 246 battery. This value is not averaged/smoothed. 247 248 Access: Read 249 250 USB: 251 252 Reports the VBUS voltage supplied now. This value is generally 253 read-only reporting, unless the 'online' state of the supply 254 is set to be programmable, in which case this value can be set 255 within the reported min/max range. 256 257 Access: Read, Write 258 259 Valid values: Represented in microvolts 260 261**Battery Properties** 262 263What: /sys/class/power_supply/<supply_name>/capacity 264Date: May 2007 265Contact: linux-pm@vger.kernel.org 266Description: 267 Fine grain representation of battery capacity. 268 269 Access: Read 270 271 Valid values: 0 - 100 (percent) 272 273What: /sys/class/power_supply/<supply_name>/capacity_alert_max 274Date: July 2012 275Contact: linux-pm@vger.kernel.org 276Description: 277 Maximum battery capacity trip-wire value where the supply will 278 notify user-space of the event. This is normally used for the 279 battery discharging scenario where user-space needs to know the 280 battery has dropped to an upper level so it can take 281 appropriate action (e.g. warning user that battery level is 282 low). 283 284 Access: Read, Write 285 286 Valid values: 0 - 100 (percent) 287 288What: /sys/class/power_supply/<supply_name>/capacity_alert_min 289Date: July 2012 290Contact: linux-pm@vger.kernel.org 291Description: 292 Minimum battery capacity trip-wire value where the supply will 293 notify user-space of the event. This is normally used for the 294 battery discharging scenario where user-space needs to know the 295 battery has dropped to a lower level so it can take 296 appropriate action (e.g. warning user that battery level is 297 critically low). 298 299 Access: Read, Write 300 301 Valid values: 0 - 100 (percent) 302 303What: /sys/class/power_supply/<supply_name>/capacity_error_margin 304Date: April 2019 305Contact: linux-pm@vger.kernel.org 306Description: 307 Battery capacity measurement becomes unreliable without 308 recalibration. This values provides the maximum error 309 margin expected to exist by the fuel gauge in percent. 310 Values close to 0% will be returned after (re-)calibration 311 has happened. Over time the error margin will increase. 312 100% means, that the capacity related values are basically 313 completely useless. 314 315 Access: Read 316 317 Valid values: 0 - 100 (percent) 318 319What: /sys/class/power_supply/<supply_name>/capacity_level 320Date: June 2009 321Contact: linux-pm@vger.kernel.org 322Description: 323 Coarse representation of battery capacity. 324 325 Access: Read 326 327 Valid values: 328 "Unknown", "Critical", "Low", "Normal", "High", 329 "Full" 330 331What: /sys/class/power_supply/<supply_name>/charge_control_limit 332Date: Oct 2012 333Contact: linux-pm@vger.kernel.org 334Description: 335 Maximum allowable charging current. Used for charge rate 336 throttling for thermal cooling or improving battery health. 337 338 Access: Read, Write 339 340 Valid values: Represented in microamps 341 342What: /sys/class/power_supply/<supply_name>/charge_control_limit_max 343Date: Oct 2012 344Contact: linux-pm@vger.kernel.org 345Description: 346 Maximum legal value for the charge_control_limit property. 347 348 Access: Read 349 350 Valid values: Represented in microamps 351 352What: /sys/class/power_supply/<supply_name>/charge_control_start_threshold 353Date: April 2019 354Contact: linux-pm@vger.kernel.org 355Description: 356 Represents a battery percentage level, below which charging will 357 begin. 358 359 Access: Read, Write 360 Valid values: 0 - 100 (percent) 361 362What: /sys/class/power_supply/<supply_name>/charge_control_end_threshold 363Date: April 2019 364Contact: linux-pm@vger.kernel.org 365Description: 366 Represents a battery percentage level, above which charging will 367 stop. 368 369 Access: Read, Write 370 371 Valid values: 0 - 100 (percent) 372 373What: /sys/class/power_supply/<supply_name>/charge_type 374Date: July 2009 375Contact: linux-pm@vger.kernel.org 376Description: 377 Represents the type of charging currently being applied to the 378 battery. "Trickle", "Fast", and "Standard" all mean different 379 charging speeds. "Adaptive" means that the charger uses some 380 algorithm to adjust the charge rate dynamically, without 381 any user configuration required. "Custom" means that the charger 382 uses the charge_control_* properties as configuration for some 383 different algorithm. 384 385 Access: Read, Write 386 387 Valid values: 388 "Unknown", "N/A", "Trickle", "Fast", "Standard", 389 "Adaptive", "Custom" 390 391What: /sys/class/power_supply/<supply_name>/charge_term_current 392Date: July 2014 393Contact: linux-pm@vger.kernel.org 394Description: 395 Reports the charging current value which is used to determine 396 when the battery is considered full and charging should end. 397 398 Access: Read 399 400 Valid values: Represented in microamps 401 402What: /sys/class/power_supply/<supply_name>/health 403Date: May 2007 404Contact: linux-pm@vger.kernel.org 405Description: 406 Reports the health of the battery or battery side of charger 407 functionality. 408 409 Access: Read 410 411 Valid values: 412 "Unknown", "Good", "Overheat", "Dead", 413 "Over voltage", "Unspecified failure", "Cold", 414 "Watchdog timer expire", "Safety timer expire", 415 "Over current", "Calibration required", "Warm", 416 "Cool", "Hot" 417 418What: /sys/class/power_supply/<supply_name>/precharge_current 419Date: June 2017 420Contact: linux-pm@vger.kernel.org 421Description: 422 Reports the charging current applied during pre-charging phase 423 for a battery charge cycle. 424 425 Access: Read 426 427 Valid values: Represented in microamps 428 429What: /sys/class/power_supply/<supply_name>/present 430Date: May 2007 431Contact: linux-pm@vger.kernel.org 432Description: 433 Reports whether a battery is present or not in the system. 434 435 Access: Read 436 437 Valid values: 438 439 == ======= 440 0: Absent 441 1: Present 442 == ======= 443 444What: /sys/class/power_supply/<supply_name>/status 445Date: May 2007 446Contact: linux-pm@vger.kernel.org 447Description: 448 Represents the charging status of the battery. Normally this 449 is read-only reporting although for some supplies this can be 450 used to enable/disable charging to the battery. 451 452 Access: Read, Write 453 454 Valid values: 455 "Unknown", "Charging", "Discharging", 456 "Not charging", "Full" 457 458What: /sys/class/power_supply/<supply_name>/technology 459Date: May 2007 460Contact: linux-pm@vger.kernel.org 461Description: 462 Describes the battery technology supported by the supply. 463 464 Access: Read 465 466 Valid values: 467 "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", 468 "NiCd", "LiMn" 469 470 471What: /sys/class/power_supply/<supply_name>/voltage_avg, 472Date: May 2007 473Contact: linux-pm@vger.kernel.org 474Description: 475 Reports an average VBAT voltage reading for the battery, over a 476 fixed period. Normally devices will provide a fixed interval in 477 which they average readings to smooth out the reported value. 478 479 Access: Read 480 481 Valid values: Represented in microvolts 482 483**USB Properties** 484 485What: /sys/class/power_supply/<supply_name>/input_current_limit 486Date: July 2014 487Contact: linux-pm@vger.kernel.org 488Description: 489 Details the incoming IBUS current limit currently set in the 490 supply. Normally this is configured based on the type of 491 connection made (e.g. A configured SDP should output a maximum 492 of 500mA so the input current limit is set to the same value). 493 Use preferably input_power_limit, and for problems that can be 494 solved using power limit use input_current_limit. 495 496 Access: Read, Write 497 498 Valid values: Represented in microamps 499 500What: /sys/class/power_supply/<supply_name>/input_voltage_limit 501Date: May 2019 502Contact: linux-pm@vger.kernel.org 503Description: 504 This entry configures the incoming VBUS voltage limit currently 505 set in the supply. Normally this is configured based on 506 system-level knowledge or user input (e.g. This is part of the 507 Pixel C's thermal management strategy to effectively limit the 508 input power to 5V when the screen is on to meet Google's skin 509 temperature targets). Note that this feature should not be 510 used for safety critical things. 511 Use preferably input_power_limit, and for problems that can be 512 solved using power limit use input_voltage_limit. 513 514 Access: Read, Write 515 516 Valid values: Represented in microvolts 517 518What: /sys/class/power_supply/<supply_name>/input_power_limit 519Date: May 2019 520Contact: linux-pm@vger.kernel.org 521Description: 522 This entry configures the incoming power limit currently set 523 in the supply. Normally this is configured based on 524 system-level knowledge or user input. Use preferably this 525 feature to limit the incoming power and use current/voltage 526 limit only for problems that can be solved using power limit. 527 528 Access: Read, Write 529 530 Valid values: Represented in microwatts 531 532What: /sys/class/power_supply/<supply_name>/online, 533Date: May 2007 534Contact: linux-pm@vger.kernel.org 535Description: 536 Indicates if VBUS is present for the supply. When the supply is 537 online, and the supply allows it, then it's possible to switch 538 between online states (e.g. Fixed -> Programmable for a PD_PPS 539 USB supply so voltage and current can be controlled). 540 541 Access: Read, Write 542 543 Valid values: 544 545 == ================================================== 546 0: Offline 547 1: Online Fixed - Fixed Voltage Supply 548 2: Online Programmable - Programmable Voltage Supply 549 == ================================================== 550 551What: /sys/class/power_supply/<supply_name>/usb_type 552Date: March 2018 553Contact: linux-pm@vger.kernel.org 554Description: 555 Reports what type of USB connection is currently active for 556 the supply, for example it can show if USB-PD capable source 557 is attached. 558 559 Access: Read-Only 560 561 Valid values: 562 "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD", 563 "PD_DRP", "PD_PPS", "BrickID" 564 565**Device Specific Properties** 566 567What: /sys/class/power/ds2760-battery.*/charge_now 568Date: May 2010 569KernelVersion: 2.6.35 570Contact: Daniel Mack <daniel@caiaq.de> 571Description: 572 This file is writeable and can be used to set the current 573 coloumb counter value inside the battery monitor chip. This 574 is needed for unavoidable corrections of aging batteries. 575 A userspace daemon can monitor the battery charging logic 576 and once the counter drops out of considerable bounds, take 577 appropriate action. 578 579What: /sys/class/power/ds2760-battery.*/charge_full 580Date: May 2010 581KernelVersion: 2.6.35 582Contact: Daniel Mack <daniel@caiaq.de> 583Description: 584 This file is writeable and can be used to set the assumed 585 battery 'full level'. As batteries age, this value has to be 586 amended over time. 587 588What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer 589Date: October 2014 590KernelVersion: 3.18.0 591Contact: Krzysztof Kozlowski <krzk@kernel.org> 592Description: 593 This entry shows and sets the maximum time the max14577 594 charger operates in fast-charge mode. When the timer expires 595 the device will terminate fast-charge mode (charging current 596 will drop to 0 A) and will trigger interrupt. 597 598 Valid values: 599 600 - 5, 6 or 7 (hours), 601 - 0: disabled. 602 603What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer 604Date: January 2015 605KernelVersion: 3.19.0 606Contact: Krzysztof Kozlowski <krzk@kernel.org> 607Description: 608 This entry shows and sets the maximum time the max77693 609 charger operates in fast-charge mode. When the timer expires 610 the device will terminate fast-charge mode (charging current 611 will drop to 0 A) and will trigger interrupt. 612 613 Valid values: 614 615 - 4 - 16 (hours), step by 2 (rounded down) 616 - 0: disabled. 617 618What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current 619Date: January 2015 620KernelVersion: 3.19.0 621Contact: Krzysztof Kozlowski <krzk@kernel.org> 622Description: 623 This entry shows and sets the charging current threshold for 624 entering top-off charging mode. When charging current in fast 625 charge mode drops below this value, the charger will trigger 626 interrupt and start top-off charging mode. 627 628 Valid values: 629 630 - 100000 - 200000 (microamps), step by 25000 (rounded down) 631 - 200000 - 350000 (microamps), step by 50000 (rounded down) 632 - 0: disabled. 633 634What: /sys/class/power_supply/max77693-charger/device/top_off_timer 635Date: January 2015 636KernelVersion: 3.19.0 637Contact: Krzysztof Kozlowski <krzk@kernel.org> 638Description: 639 This entry shows and sets the maximum time the max77693 640 charger operates in top-off charge mode. When the timer expires 641 the device will terminate top-off charge mode (charging current 642 will drop to 0 A) and will trigger interrupt. 643 644 Valid values: 645 646 - 0 - 70 (minutes), step by 10 (rounded down) 647 648What: /sys/class/power_supply/bq24257-charger/ovp_voltage 649Date: October 2015 650KernelVersion: 4.4.0 651Contact: Andreas Dannenberg <dannenberg@ti.com> 652Description: 653 This entry configures the overvoltage protection feature of bq24257- 654 type charger devices. This feature protects the device and other 655 components against damage from overvoltage on the input supply. See 656 device datasheet for details. 657 658 Valid values: 659 660 - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000, 661 10500000 (all uV) 662 663What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage 664Date: October 2015 665KernelVersion: 4.4.0 666Contact: Andreas Dannenberg <dannenberg@ti.com> 667Description: 668 This entry configures the input dynamic power path management voltage of 669 bq24257-type charger devices. Once the supply drops to the configured 670 voltage, the input current limit is reduced down to prevent the further 671 drop of the supply. When the IC enters this mode, the charge current is 672 lower than the set value. See device datasheet for details. 673 674 Valid values: 675 676 - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000, 677 4760000 (all uV) 678 679What: /sys/class/power_supply/bq24257-charger/high_impedance_enable 680Date: October 2015 681KernelVersion: 4.4.0 682Contact: Andreas Dannenberg <dannenberg@ti.com> 683Description: 684 This entry allows enabling the high-impedance mode of bq24257-type 685 charger devices. If enabled, it places the charger IC into low power 686 standby mode with the switch mode controller disabled. When disabled, 687 the charger operates normally. See device datasheet for details. 688 689 Valid values: 690 691 - 1: enabled 692 - 0: disabled 693 694What: /sys/class/power_supply/bq24257-charger/sysoff_enable 695Date: October 2015 696KernelVersion: 4.4.0 697Contact: Andreas Dannenberg <dannenberg@ti.com> 698Description: 699 This entry allows enabling the sysoff mode of bq24257-type charger 700 devices. If enabled and the input is removed, the internal battery FET 701 is turned off in order to reduce the leakage from the BAT pin to less 702 than 1uA. Note that on some devices/systems this disconnects the battery 703 from the system. See device datasheet for details. 704 705 Valid values: 706 707 - 1: enabled 708 - 0: disabled 709 710What: /sys/class/power_supply/<supply_name>/manufacture_year 711Date: January 2020 712Contact: linux-pm@vger.kernel.org 713Description: 714 Reports the year (following Gregorian calendar) when the device has been 715 manufactured. 716 717 Access: Read 718 719 Valid values: Reported as integer 720 721What: /sys/class/power_supply/<supply_name>/manufacture_month 722Date: January 2020 723Contact: linux-pm@vger.kernel.org 724Description: 725 Reports the month when the device has been manufactured. 726 727 Access: Read 728 729 Valid values: 1-12 730 731What: /sys/class/power_supply/<supply_name>/manufacture_day 732Date: January 2020 733Contact: linux-pm@vger.kernel.org 734Description: 735 Reports the day of month when the device has been manufactured. 736 737 Access: Read 738 Valid values: 1-31 739