1What:		/sys/class/leds/<led>/als_channel
2Date:		May 2012
3KernelVersion:	3.5
4Contact:	Johan Hovold <jhovold@gmail.com>
5Description:
6		Set the ALS output channel to use as input in
7		ALS-current-control mode (1, 2), where:
8
9		1 - out_current1
10		2 - out_current2
11
12What:		/sys/class/leds/<led>/als_en
13Date:		May 2012
14KernelVersion:	3.5
15Contact:	Johan Hovold <jhovold@gmail.com>
16Description:
17		Enable ALS-current-control mode (0, 1).
18
19What:		/sys/class/leds/<led>/falltime
20What:		/sys/class/leds/<led>/risetime
21Date:		April 2012
22KernelVersion:	3.5
23Contact:	Johan Hovold <jhovold@gmail.com>
24Description:
25		Set the pattern generator fall and rise times (0..7), where:
26
27		0 - 2048 us
28		1 - 262 ms
29		2 - 524 ms
30		3 - 1.049 s
31		4 - 2.097 s
32		5 - 4.194 s
33		6 - 8.389 s
34		7 - 16.78 s
35
36What:		/sys/class/leds/<led>/id
37Date:		April 2012
38KernelVersion:	3.5
39Contact:	Johan Hovold <jhovold@gmail.com>
40Description:
41		Get the id of this led (0..3).
42
43What:		/sys/class/leds/<led>/linear
44Date:		April 2012
45KernelVersion:	3.5
46Contact:	Johan Hovold <jhovold@gmail.com>
47Description:
48		Set the brightness-mapping mode (0, 1), where:
49
50		0 - exponential mode
51		1 - linear mode
52
53What:		/sys/class/leds/<led>/pwm
54Date:		April 2012
55KernelVersion:	3.5
56Contact:	Johan Hovold <jhovold@gmail.com>
57Description:
58		Set the PWM-input control mask (5 bits), where:
59
60		bit 5 - PWM-input enabled in Zone 4
61		bit 4 - PWM-input enabled in Zone 3
62		bit 3 - PWM-input enabled in Zone 2
63		bit 2 - PWM-input enabled in Zone 1
64		bit 1 - PWM-input enabled in Zone 0
65		bit 0 - PWM-input enabled
66