1What: /sys/class/firmware-attributes/*/attributes/*/ 2Date: February 2021 3KernelVersion: 5.11 4Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, 5 Prasanth KSR <prasanth.ksr@dell.com> 6 Dell.Client.Kernel@dell.com 7Description: 8 A sysfs interface for systems management software to enable 9 configuration capability on supported systems. This directory 10 exposes interfaces for interacting with configuration options. 11 12 Unless otherwise specified in an attribute description all attributes are optional 13 and will accept UTF-8 input. 14 15 type: 16 A file that can be read to obtain the type of attribute. 17 This attribute is mandatory. 18 19 The following are known types: 20 21 - enumeration: a set of pre-defined valid values 22 - integer: a range of numerical values 23 - string 24 25 All attribute types support the following values: 26 27 current_value: 28 A file that can be read to obtain the current 29 value of the <attr>. 30 31 This file can also be written to in order to update the value of a 32 <attr> 33 34 This attribute is mandatory. 35 36 default_value: 37 A file that can be read to obtain the default 38 value of the <attr> 39 40 display_name: 41 A file that can be read to obtain a user friendly 42 description of the at <attr> 43 44 display_name_language_code: 45 A file that can be read to obtain 46 the IETF language tag corresponding to the 47 "display_name" of the <attr> 48 49 "enumeration"-type specific properties: 50 51 possible_values: 52 A file that can be read to obtain the possible 53 values of the <attr>. Values are separated using 54 semi-colon (``;``). 55 56 "integer"-type specific properties: 57 58 min_value: 59 A file that can be read to obtain the lower 60 bound value of the <attr> 61 62 max_value: 63 A file that can be read to obtain the upper 64 bound value of the <attr> 65 66 scalar_increment: 67 A file that can be read to obtain the scalar value used for 68 increments of current_value this attribute accepts. 69 70 "string"-type specific properties: 71 72 max_length: 73 A file that can be read to obtain the maximum 74 length value of the <attr> 75 76 min_length: 77 A file that can be read to obtain the minimum 78 length value of the <attr> 79 80 Dell specific class extensions 81 ------------------------------ 82 83 On Dell systems the following additional attributes are available: 84 85 dell_modifier: 86 A file that can be read to obtain attribute-level 87 dependency rule. It says an attribute X will become read-only or 88 suppressed, if/if-not attribute Y is configured. 89 90 modifier rules can be in following format:: 91 92 [ReadOnlyIf:<attribute>=<value>] 93 [ReadOnlyIfNot:<attribute>=<value>] 94 [SuppressIf:<attribute>=<value>] 95 [SuppressIfNot:<attribute>=<value>] 96 97 For example:: 98 99 AutoOnFri/dell_modifier has value, 100 [SuppressIfNot:AutoOn=SelectDays] 101 102 This means AutoOnFri will be suppressed in BIOS setup if AutoOn 103 attribute is not "SelectDays" and its value will not be effective 104 through sysfs until this rule is met. 105 106 Enumeration attributes also support the following: 107 108 dell_value_modifier: 109 A file that can be read to obtain value-level dependency. 110 This file is similar to dell_modifier but here, an 111 attribute's current value will be forcefully changed based 112 dependent attributes value. 113 114 dell_value_modifier rules can be in following format:: 115 116 <value>[ForceIf:<attribute>=<value>] 117 <value>[ForceIfNot:<attribute>=<value>] 118 119 For example:: 120 121 LegacyOrom/dell_value_modifier has value: 122 Disabled[ForceIf:SecureBoot=Enabled] 123 124 This means LegacyOrom's current value will be forced to 125 "Disabled" in BIOS setup if SecureBoot is Enabled and its 126 value will not be effective through sysfs until this rule is 127 met. 128 129What: /sys/class/firmware-attributes/*/authentication/ 130Date: February 2021 131KernelVersion: 5.11 132Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, 133 Prasanth KSR <prasanth.ksr@dell.com> 134 Dell.Client.Kernel@dell.com 135Description: 136 Devices support various authentication mechanisms which can be exposed 137 as a separate configuration object. 138 139 For example a "BIOS Admin" password and "System" Password can be set, 140 reset or cleared using these attributes. 141 142 - An "Admin" password is used for preventing modification to the BIOS 143 settings. 144 - A "System" password is required to boot a machine. 145 146 Change in any of these two authentication methods will also generate an 147 uevent KOBJ_CHANGE. 148 149 is_enabled: 150 A file that can be read to obtain a 0/1 flag to see if 151 <attr> authentication is enabled. 152 This attribute is mandatory. 153 154 role: 155 The type of authentication used. 156 This attribute is mandatory. 157 158 Known types: 159 bios-admin: 160 Representing BIOS administrator password 161 power-on: 162 Representing a password required to use 163 the system 164 system-mgmt: 165 Representing System Management password. 166 See Lenovo extensions section for details 167 HDD: 168 Representing HDD password 169 See Lenovo extensions section for details 170 NVMe: 171 Representing NVMe password 172 See Lenovo extensions section for details 173 174 mechanism: 175 The means of authentication. This attribute is mandatory. 176 Only supported type currently is "password". 177 178 max_password_length: 179 A file that can be read to obtain the 180 maximum length of the Password 181 182 min_password_length: 183 A file that can be read to obtain the 184 minimum length of the Password 185 186 current_password: 187 A write only value used for privileged access such as 188 setting attributes when a system or admin password is set 189 or resetting to a new password 190 191 This attribute is mandatory when mechanism == "password". 192 193 new_password: 194 A write only value that when used in tandem with 195 current_password will reset a system or admin password. 196 197 Note, password management is session specific. If Admin password is set, 198 same password must be written into current_password file (required for 199 password-validation) and must be cleared once the session is over. 200 For example:: 201 202 echo "password" > current_password 203 echo "disabled" > TouchScreen/current_value 204 echo "" > current_password 205 206 Drivers may emit a CHANGE uevent when a password is set or unset 207 userspace may check it again. 208 209 On Dell and Lenovo systems, if Admin password is set, then all BIOS attributes 210 require password validation. 211 On Lenovo systems if you change the Admin password the new password is not active until 212 the next boot. 213 214 Lenovo specific class extensions 215 -------------------------------- 216 217 On Lenovo systems the following additional settings are available: 218 219 role: system-mgmt This gives the same authority as the bios-admin password to control 220 security related features. The authorities allocated can be set via 221 the BIOS menu SMP Access Control Policy 222 223 role: HDD & NVMe This password is used to unlock access to the drive at boot. Note see 224 'level' and 'index' extensions below. 225 226 lenovo_encoding: 227 The encoding method that is used. This can be either "ascii" 228 or "scancode". Default is set to "ascii" 229 230 lenovo_kbdlang: 231 The keyboard language method that is used. This is generally a 232 two char code (e.g. "us", "fr", "gr") and may vary per platform. 233 Default is set to "us" 234 235 level: 236 Available for HDD and NVMe authentication to set 'user' or 'master' 237 privilege level. 238 If only the user password is configured then this should be used to 239 unlock the drive at boot. If both master and user passwords are set 240 then either can be used. If a master password is set a user password 241 is required. 242 This attribute defaults to 'user' level 243 244 index: 245 Used with HDD and NVME authentication to set the drive index 246 that is being referenced (e.g hdd1, hdd2 etc) 247 This attribute defaults to device 1. 248 249 certificate, signature, save_signature: 250 These attributes are used for certificate based authentication. This is 251 used in conjunction with a signing server as an alternative to password 252 based authentication. 253 The user writes to the attribute(s) with a BASE64 encoded string obtained 254 from the signing server. 255 The attributes can be displayed to check the stored value. 256 257 Some usage examples: 258 259 Installing a certificate to enable feature:: 260 261 echo "supervisor password" > authentication/Admin/current_password 262 echo "signed certificate" > authentication/Admin/certificate 263 264 Updating the installed certificate:: 265 266 echo "signature" > authentication/Admin/signature 267 echo "signed certificate" > authentication/Admin/certificate 268 269 Removing the installed certificate:: 270 271 echo "signature" > authentication/Admin/signature 272 echo "" > authentication/Admin/certificate 273 274 Changing a BIOS setting:: 275 276 echo "signature" > authentication/Admin/signature 277 echo "save signature" > authentication/Admin/save_signature 278 echo Enable > attribute/PasswordBeep/current_value 279 280 You cannot enable certificate authentication if a supervisor password 281 has not been set. 282 Clearing the certificate results in no bios-admin authentication method 283 being configured allowing anyone to make changes. 284 After any of these operations the system must reboot for the changes to 285 take effect. 286 287 certificate_thumbprint: 288 Read only attribute used to display the MD5, SHA1 and SHA256 thumbprints 289 for the certificate installed in the BIOS. 290 291 certificate_to_password: 292 Write only attribute used to switch from certificate based authentication 293 back to password based. 294 Usage:: 295 296 echo "signature" > authentication/Admin/signature 297 echo "password" > authentication/Admin/certificate_to_password 298 299 300What: /sys/class/firmware-attributes/*/attributes/pending_reboot 301Date: February 2021 302KernelVersion: 5.11 303Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, 304 Prasanth KSR <prasanth.ksr@dell.com> 305 Dell.Client.Kernel@dell.com 306Description: 307 A read-only attribute reads 1 if a reboot is necessary to apply 308 pending BIOS attribute changes. Also, an uevent_KOBJ_CHANGE is 309 generated when it changes to 1. 310 311 == ========================================= 312 0 All BIOS attributes setting are current 313 1 A reboot is necessary to get pending BIOS 314 attribute changes applied 315 == ========================================= 316 317 Note, userspace applications need to follow below steps for efficient 318 BIOS management, 319 320 1. Check if admin password is set. If yes, follow session method for 321 password management as briefed under authentication section above. 322 2. Before setting any attribute, check if it has any modifiers 323 or value_modifiers. If yes, incorporate them and then modify 324 attribute. 325 326 Drivers may emit a CHANGE uevent when this value changes and userspace 327 may check it again. 328 329What: /sys/class/firmware-attributes/*/attributes/reset_bios 330Date: February 2021 331KernelVersion: 5.11 332Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, 333 Prasanth KSR <prasanth.ksr@dell.com> 334 Dell.Client.Kernel@dell.com 335Description: 336 This attribute can be used to reset the BIOS Configuration. 337 Specifically, it tells which type of reset BIOS configuration is being 338 requested on the host. 339 340 Reading from it returns a list of supported options encoded as: 341 342 - 'builtinsafe' (Built in safe configuration profile) 343 - 'lastknowngood' (Last known good saved configuration profile) 344 - 'factory' (Default factory settings configuration profile) 345 - 'custom' (Custom saved configuration profile) 346 347 The currently selected option is printed in square brackets as 348 shown below:: 349 350 # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios 351 # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios 352 builtinsafe lastknowngood [factory] custom 353 354 Note that any changes to this attribute requires a reboot 355 for changes to take effect. 356 357What: /sys/class/firmware-attributes/*/attributes/debug_cmd 358Date: July 2021 359KernelVersion: 5.14 360Contact: Mark Pearson <markpearson@lenovo.com> 361Description: 362 This write only attribute can be used to send debug commands to the BIOS. 363 This should only be used when recommended by the BIOS vendor. Vendors may 364 use it to enable extra debug attributes or BIOS features for testing purposes. 365 366 Note that any changes to this attribute requires a reboot for changes to take effect. 367