1What: /sys/bus/iio/devices/iio:deviceX 2KernelVersion: 2.6.35 3Contact: linux-iio@vger.kernel.org 4Description: 5 Hardware chip or device accessed by one communication port. 6 Corresponds to a grouping of sensor channels. X is the IIO 7 index of the device. 8 9What: /sys/bus/iio/devices/triggerX 10KernelVersion: 2.6.35 11Contact: linux-iio@vger.kernel.org 12Description: 13 An event driven driver of data capture to an in kernel buffer. 14 May be provided by a device driver that also has an IIO device 15 based on hardware generated events (e.g. data ready) or 16 provided by a separate driver for other hardware (e.g. 17 periodic timer, GPIO or high resolution timer). 18 19 Contains trigger type specific elements. These do not 20 generalize well and hence are not documented in this file. 21 X is the IIO index of the trigger. 22 23What: /sys/bus/iio/devices/iio:deviceX/buffer 24KernelVersion: 2.6.35 25Contact: linux-iio@vger.kernel.org 26Description: 27 Directory of attributes relating to the buffer for the device. 28 29What: /sys/bus/iio/devices/iio:deviceX/name 30KernelVersion: 2.6.35 31Contact: linux-iio@vger.kernel.org 32Description: 33 Description of the physical chip / device for device X. 34 Typically a part number. 35 36What: /sys/bus/iio/devices/iio:deviceX/label 37KernelVersion: 5.8 38Contact: linux-iio@vger.kernel.org 39Description: 40 Optional symbolic label for a device. 41 This is useful for userspace to be able to better identify an 42 individual device. 43 44 The contents of the label are free-form, but there are some 45 standardized uses: 46 47 For proximity sensors which give the proximity (of a person) to 48 a certain wlan or wwan antenna the following standardized labels 49 are used: 50 51 * "proximity-wifi" 52 * "proximity-lte" 53 * "proximity-wifi-lte" 54 * "proximity-wifi-left" 55 * "proximity-wifi-right" 56 57 These are used to indicate to userspace that these proximity 58 sensors may be used to tune transmit power to ensure that 59 Specific Absorption Rate (SAR) limits are honored. 60 The "-left" and "-right" labels are for devices with multiple 61 antennas. 62 63 In some laptops/tablets the standardized proximity sensor labels 64 instead indicate proximity to a specific part of the device: 65 66 * "proximity-palmrest" indicates proximity to the keyboard's palmrest 67 * "proximity-palmrest-left" indicates proximity to the left part of the palmrest 68 * "proximity-palmrest-right" indicates proximity to the right part of the palmrest 69 * "proximity-lap" indicates the device is being used on someone's lap 70 71 Note "proximity-lap" is special in that its value may be 72 calculated by firmware from other sensor readings, rather then 73 being a raw sensor reading. 74 75 For accelerometers used in 2-in-1s with 360° (yoga-style) hinges, 76 which have an accelerometer in both their base and their display, 77 the following standardized labels are used: 78 79 * "accel-base" 80 * "accel-display" 81 82 For devices where an accelerometer is housed in the swivel camera subassembly 83 (for AR application), the following standardized label is used: 84 85 * "accel-camera" 86 87What: /sys/bus/iio/devices/iio:deviceX/current_timestamp_clock 88KernelVersion: 4.5 89Contact: linux-iio@vger.kernel.org 90Description: 91 String identifying current posix clock used to timestamp 92 buffered samples and events for device X. 93 94What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency 95What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency 96What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency 97What: /sys/bus/iio/devices/triggerX/sampling_frequency 98KernelVersion: 2.6.35 99Contact: linux-iio@vger.kernel.org 100Description: 101 Some devices have internal clocks. This parameter sets the 102 resulting sampling frequency. In many devices this 103 parameter has an effect on input filters etc. rather than 104 simply controlling when the input is sampled. As this 105 affects data ready triggers, hardware buffers and the sysfs 106 direct access interfaces, it may be found in any of the 107 relevant directories. If it affects all of the above 108 then it is to be found in the base device directory. 109 110 The stm32-timer-trigger has the additional characteristic that 111 a sampling_frequency of 0 is defined to stop sampling. 112 113What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available 114What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available 115What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available 116What: /sys/.../iio:deviceX/buffer/sampling_frequency_available 117What: /sys/bus/iio/devices/triggerX/sampling_frequency_available 118KernelVersion: 2.6.35 119Contact: linux-iio@vger.kernel.org 120Description: 121 When the internal sampling clock can only take a specific set of 122 frequencies, we can specify the available values with: 123 124 - a small discrete set of values like "0 2 4 6 8" 125 - a range with minimum, step and maximum frequencies like 126 "[min step max]" 127 128What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio 129KernelVersion: 2.6.38 130Contact: linux-iio@vger.kernel.org 131Description: 132 Hardware dependent ADC oversampling. Controls the sampling ratio 133 of the digital filter if available. 134 135What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available 136KernelVersion: 2.6.38 137Contact: linux-iio@vger.kernel.org 138Description: 139 Hardware dependent values supported by the oversampling filter. 140 141What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw 142What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw 143What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw 144What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw 145KernelVersion: 2.6.35 146Contact: linux-iio@vger.kernel.org 147Description: 148 Raw (unscaled no bias removal etc.) voltage measurement from 149 channel Y. In special cases where the channel does not 150 correspond to externally available input one of the named 151 versions may be used. The number must always be specified and 152 unique to allow association with event codes. Units after 153 application of scale and offset are millivolts. 154 155 Channels with 'i' and 'q' modifiers always exist in pairs and both 156 channels refer to the same signal. The 'i' channel contains the in-phase 157 component of the signal while the 'q' channel contains the quadrature 158 component. 159 160What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw 161KernelVersion: 2.6.35 162Contact: linux-iio@vger.kernel.org 163Description: 164 Raw (unscaled) differential voltage measurement equivalent to 165 channel Y - channel Z where these channel numbers apply to the 166 physically equivalent inputs when non differential readings are 167 separately available. In differential only parts, then all that 168 is required is a consistent labeling. Units after application 169 of scale and offset are millivolts. 170 171What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw 172What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw 173KernelVersion: 3.17 174Contact: linux-iio@vger.kernel.org 175Description: 176 Raw (unscaled no bias removal etc.) current measurement from 177 channel Y. In special cases where the channel does not 178 correspond to externally available input one of the named 179 versions may be used. The number must always be specified and 180 unique to allow association with event codes. Units after 181 application of scale and offset are milliamps. 182 183What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw 184KernelVersion: 4.5 185Contact: linux-iio@vger.kernel.org 186Description: 187 Raw (unscaled no bias removal etc.) power measurement from 188 channel Y. The number must always be specified and 189 unique to allow association with event codes. Units after 190 application of scale and offset are milliwatts. 191 192What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw 193KernelVersion: 3.2 194Contact: linux-iio@vger.kernel.org 195Description: 196 Raw capacitance measurement from channel Y. Units after 197 application of scale and offset are nanofarads. 198 199What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw 200KernelVersion: 3.2 201Contact: linux-iio@vger.kernel.org 202Description: 203 Raw differential capacitance measurement equivalent to 204 channel Y - channel Z where these channel numbers apply to the 205 physically equivalent inputs when non differential readings are 206 separately available. In differential only parts, then all that 207 is required is a consistent labeling. Units after application 208 of scale and offset are nanofarads. 209 210What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint 211KernelVersion: 6.1 212Contact: linux-iio@vger.kernel.org 213Description: 214 For differential channels, this an offset that is applied 215 equally to both inputs. As the reading is of the difference 216 between the two inputs, this should not be applied to the _raw 217 reading by userspace (unlike _offset) and unlike calibbias 218 it does not affect the differential value measured because 219 the effect of _zeropoint cancels out across the two inputs 220 that make up the differential pair. It's purpose is to bring 221 the individual signals, before the differential is measured, 222 within the measurement range of the device. The naming is 223 chosen because if the separate inputs that make the 224 differential pair are drawn on a graph in their 225 _raw units, this is the value that the zero point on the 226 measurement axis represents. It is expressed with the 227 same scaling as _raw. 228 229What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw 230What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw 231What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw 232What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw 233What: /sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw 234What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_raw 235KernelVersion: 2.6.35 236Contact: linux-iio@vger.kernel.org 237Description: 238 Raw (unscaled no bias removal etc.) temperature measurement. 239 If an axis is specified it generally means that the temperature 240 sensor is associated with one part of a compound device (e.g. 241 a gyroscope axis). The ambient and object modifiers distinguish 242 between ambient (reference) and distant temperature for contact- 243 less measurements. Units after application of scale and offset 244 are milli degrees Celsius. 245 246What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input 247KernelVersion: 2.6.38 248Contact: linux-iio@vger.kernel.org 249Description: 250 Scaled temperature measurement in milli degrees Celsius. 251 252What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw 253What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw 254What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw 255KernelVersion: 2.6.35 256Contact: linux-iio@vger.kernel.org 257Description: 258 Acceleration in direction x, y or z (may be arbitrarily assigned 259 but should match other such assignments on device). 260 Has all of the equivalent parameters as per voltageY. Units 261 after application of scale and offset are m/s^2. 262 263What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw 264What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw 265What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw 266KernelVersion: 6.1 267Contact: linux-iio@vger.kernel.org 268Description: 269 As per in_accel_X_raw attributes, but minus the 270 acceleration due to gravity. 271 272What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw 273What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw 274What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw 275KernelVersion: 4.11 276Contact: linux-iio@vger.kernel.org 277Description: 278 Gravity in direction x, y or z (may be arbitrarily assigned 279 but should match other such assignments on device). 280 Units after application of scale and offset are m/s^2. 281 282What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw 283What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw 284KernelVersion: 4.17 285Contact: linux-iio@vger.kernel.org 286Description: 287 Angle of rotation. Units after application of scale and offset 288 are radians. 289 290What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw 291What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw 292KernelVersion: 4.19 293Contact: linux-iio@vger.kernel.org 294Description: 295 Relative position in direction x or y on a pad (may be 296 arbitrarily assigned but should match other such assignments on 297 device). 298 Units after application of scale and offset are milli percents 299 from the pad's size in both directions. Should be calibrated by 300 the consumer. 301 302What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw 303What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw 304What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw 305KernelVersion: 2.6.35 306Contact: linux-iio@vger.kernel.org 307Description: 308 Angular velocity about axis x, y or z (may be arbitrarily 309 assigned). Has all the equivalent parameters as per voltageY. 310 Units after application of scale and offset are radians per 311 second. 312 313What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw 314What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw 315What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw 316KernelVersion: 2.6.35 317Contact: linux-iio@vger.kernel.org 318Description: 319 Inclination raw reading about axis x, y or z (may be 320 arbitrarily assigned). Data converted by application of offset 321 and scale to degrees. 322 323What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw 324What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw 325What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw 326KernelVersion: 2.6.35 327Contact: linux-iio@vger.kernel.org 328Description: 329 Magnetic field along axis x, y or z (may be arbitrarily 330 assigned). Data converted by application of offset 331 then scale to Gauss. 332 333What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw 334What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw 335What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw 336KernelVersion: 2.6.36 337Contact: linux-iio@vger.kernel.org 338Description: 339 Highest value since some reset condition. These 340 attributes allow access to this and are otherwise 341 the direct equivalent of the <type>Y[_name]_raw attributes. 342 343What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw 344KernelVersion: 2.6.36 345Contact: linux-iio@vger.kernel.org 346Description: 347 A computed peak value based on the sum squared magnitude of 348 the underlying value in the specified directions. 349 350What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw 351What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw 352KernelVersion: 3.8 353Contact: linux-iio@vger.kernel.org 354Description: 355 Raw pressure measurement from channel Y. Units after 356 application of scale and offset are kilopascal. 357 358What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input 359What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input 360KernelVersion: 3.8 361Contact: linux-iio@vger.kernel.org 362Description: 363 Scaled pressure measurement from channel Y, in kilopascal. 364 365What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw 366KernelVersion: 3.14 367Contact: linux-iio@vger.kernel.org 368Description: 369 Raw humidity measurement of air. Units after application of 370 scale and offset are milli percent. 371 372What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input 373KernelVersion: 3.14 374Contact: linux-iio@vger.kernel.org 375Description: 376 Scaled humidity measurement in milli percent. 377 378What: /sys/bus/iio/devices/iio:deviceX/in_X_mean_raw 379KernelVersion: 3.5 380Contact: linux-iio@vger.kernel.org 381Description: 382 Averaged raw measurement from channel X. The number of values 383 used for averaging is device specific. The converting rules for 384 normal raw values also applies to the averaged raw values. 385 386What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset 387What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset 388What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset 389What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset 390What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset 391What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset 392What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset 393What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset 394What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset 395What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset 396What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset 397What: /sys/bus/iio/devices/iio:deviceX/in_current_offset 398What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset 399What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset 400What: /sys/bus/iio/devices/iio:deviceX/in_current_q_offset 401What: /sys/bus/iio/devices/iio:deviceX/in_current_i_offset 402What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset 403What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset 404What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset 405What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset 406What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset 407What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset 408What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset 409What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset 410What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceX_offset 411KernelVersion: 2.6.35 412Contact: linux-iio@vger.kernel.org 413Description: 414 If known for a device, offset to be added to <type>[Y]_raw prior 415 to scaling by <type>[Y]_scale in order to obtain value in the 416 <type> units as specified in <type>[Y]_raw documentation. 417 Not present if the offset is always 0 or unknown. If Y or 418 axis <x|y|z> is not present, then the offset applies to all 419 in channels of <type>. 420 May be writable if a variable offset can be applied on the 421 device. Note that this is different to calibbias which 422 is for devices (or drivers) that apply offsets to compensate 423 for variation between different instances of the part, typically 424 adjusted by using some hardware supported calibration procedure. 425 Calibbias is applied internally, offset is applied in userspace 426 to the _raw output. 427 428What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale 429What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale 430What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale 431What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale 432What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale 433What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale 434What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale 435What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale 436What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale 437What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale 438What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale 439What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale 440What: /sys/bus/iio/devices/iio:deviceX/in_current_scale 441What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale 442What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale 443What: /sys/bus/iio/devices/iio:deviceX/in_current_i_scale 444What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale 445What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale 446What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale 447What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale 448What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale 449What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale 450What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale 451What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale 452What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale 453What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale 454What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale 455What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale 456What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale 457What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale 458What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale 459What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale 460What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale 461What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale 462What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale 463What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale 464What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale 465What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale 466What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale 467What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale 468What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_scale 469KernelVersion: 2.6.35 470Contact: linux-iio@vger.kernel.org 471Description: 472 If known for a device, scale to be applied to <type>Y[_name]_raw 473 post addition of <type>[Y][_name]_offset in order to obtain the 474 measured value in <type> units as specified in 475 <type>[Y][_name]_raw documentation. If shared across all in 476 channels then Y and <x|y|z> are not present and the value is 477 called <type>[Y][_name]_scale. The peak modifier means this 478 value is applied to <type>Y[_name]_peak_raw values. 479 480What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias 481What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias 482What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias 483What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias 484What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias 485What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias 486What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias 487What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias 488What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias 489What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias 490KernelVersion: 2.6.35 491Contact: linux-iio@vger.kernel.org 492Description: 493 Hardware applied calibration offset (assumed to fix production 494 inaccuracies). 495 icm42600: For this device values are real physical offsets 496 expressed in SI units (m/s^2 for accelerometers and rad/s 497 for gyroscope)/ 498 499What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available 500What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available 501KernelVersion: 5.8 502Contact: linux-iio@vger.kernel.org 503Description: 504 Available values of calibbias. Maybe expressed as either of: 505 506 - a small discrete set of values like "0 2 4 6 8" 507 - a range specified as "[min step max]" 508 509What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale 510What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale 511What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale 512What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale 513What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale 514What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale 515What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale 516What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale 517What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale 518What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale 519What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale 520What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale 521What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale 522What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale 523What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale 524What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale 525What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale 526What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale 527What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale 528KernelVersion: 2.6.35 529Contact: linux-iio@vger.kernel.org 530Description: 531 Hardware applied calibration scale factor (assumed to fix 532 production inaccuracies). If shared across all channels, 533 <type>_calibscale is used. 534 535What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender 536What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender 537What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender 538What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender 539KernelVersion: 4.0 540Contact: linux-iio@vger.kernel.org 541Description: 542 Gender of the user (e.g.: male, female) used by some pedometers 543 to compute the stride length, distance, speed and activity 544 type. 545 546What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available 547What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available 548What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available 549What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available 550KernelVersion: 4.0 551Contact: linux-iio@vger.kernel.org 552Description: 553 Lists all available gender values (e.g.: male, female). 554 555What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight 556What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight 557What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight 558What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight 559KernelVersion: 3.19 560Contact: linux-iio@vger.kernel.org 561Description: 562 Height of the user (in meters) used by some pedometers 563 to compute the stride length, distance, speed and activity 564 type. 565 566What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight 567KernelVersion: 4.0 568Contact: linux-iio@vger.kernel.org 569Description: 570 Weight of the user (in kg). It is needed by some pedometers 571 to compute the calories burnt by the user. 572 573What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available 574What: /sys/.../iio:deviceX/in_anglvel_scale_available 575What: /sys/.../iio:deviceX/in_magn_scale_available 576What: /sys/.../iio:deviceX/in_illuminance_scale_available 577What: /sys/.../iio:deviceX/in_intensity_scale_available 578What: /sys/.../iio:deviceX/in_proximity_scale_available 579What: /sys/.../iio:deviceX/in_voltageX_scale_available 580What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available 581What: /sys/.../iio:deviceX/out_voltageX_scale_available 582What: /sys/.../iio:deviceX/out_altvoltageX_scale_available 583What: /sys/.../iio:deviceX/in_capacitance_scale_available 584What: /sys/.../iio:deviceX/in_pressure_scale_available 585What: /sys/.../iio:deviceX/in_pressureY_scale_available 586KernelVersion: 2.6.35 587Contact: linux-iio@vger.kernel.org 588Description: 589 If a discrete set of scale values is available, they 590 are listed in this attribute. 591 592What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain 593What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain 594What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain 595What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain 596What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain 597What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain 598KernelVersion: 2.6.35 599Contact: linux-iio@vger.kernel.org 600Description: 601 Hardware applied gain factor. If shared across all channels, 602 <type>_hardwaregain is used. 603 604What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available 605KernelVersion: 5.10 606Contact: linux-iio@vger.kernel.org 607Description: 608 Lists all available hardware applied gain factors. Shared across all 609 channels. 610 611What: /sys/.../in_accel_filter_low_pass_3db_frequency 612What: /sys/.../in_magn_filter_low_pass_3db_frequency 613What: /sys/.../in_anglvel_filter_low_pass_3db_frequency 614KernelVersion: 3.2 615Contact: linux-iio@vger.kernel.org 616Description: 617 If a known or controllable low pass filter is applied 618 to the underlying data channel, then this parameter 619 gives the 3dB frequency of the filter in Hz. 620 621What: /sys/.../in_accel_filter_high_pass_3db_frequency 622What: /sys/.../in_anglvel_filter_high_pass_3db_frequency 623What: /sys/.../in_magn_filter_high_pass_3db_frequency 624KernelVersion: 4.2 625Contact: linux-iio@vger.kernel.org 626Description: 627 If a known or controllable high pass filter is applied 628 to the underlying data channel, then this parameter 629 gives the 3dB frequency of the filter in Hz. 630 631What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw 632What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw 633KernelVersion: 2.6.37 634Contact: linux-iio@vger.kernel.org 635Description: 636 Raw (unscaled, no bias etc.) output voltage for 637 channel Y. The number must always be specified and 638 unique if the output corresponds to a single channel. 639 While DAC like devices typically use out_voltage, 640 a continuous frequency generating device, such as 641 a DDS or PLL should use out_altvoltage. 642 643What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw 644What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw 645KernelVersion: 2.6.37 646Contact: linux-iio@vger.kernel.org 647Description: 648 Raw (unscaled, no bias etc.) output voltage for an aggregate of 649 channel Y, channel Z, etc. This interface is available in cases 650 where a single output sets the value for multiple channels 651 simultaneously. 652 653What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode 654What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode 655What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode 656What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode 657KernelVersion: 2.6.38 658Contact: linux-iio@vger.kernel.org 659Description: 660 Specifies the output powerdown mode. 661 DAC output stage is disconnected from the amplifier and 662 1kohm_to_gnd: connected to ground via an 1kOhm resistor, 663 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, 664 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 665 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 666 90kohm_to_gnd: connected to ground via a 90kOhm resistor, 667 100kohm_to_gnd: connected to ground via an 100kOhm resistor, 668 125kohm_to_gnd: connected to ground via an 125kOhm resistor, 669 500kohm_to_gnd: connected to ground via a 500kOhm resistor, 670 640kohm_to_gnd: connected to ground via a 640kOhm resistor, 671 three_state: left floating. 672 For a list of available output power down options read 673 outX_powerdown_mode_available. If Y is not present the 674 mode is shared across all outputs. 675 676What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available 677What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available 678What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available 679What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available 680KernelVersion: 2.6.38 681Contact: linux-iio@vger.kernel.org 682Description: 683 Lists all available output power down modes. 684 If Y is not present the mode is shared across all outputs. 685 686What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown 687What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown 688What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown 689What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown 690KernelVersion: 2.6.38 691Contact: linux-iio@vger.kernel.org 692Description: 693 Writing 1 causes output Y to enter the power down mode specified 694 by the corresponding outY_powerdown_mode. DAC output stage is 695 disconnected from the amplifier. Clearing returns to normal 696 operation. Y may be suppressed if all outputs are controlled 697 together. 698 699What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency 700KernelVersion: 3.4.0 701Contact: linux-iio@vger.kernel.org 702Description: 703 Output frequency for channel Y in Hz. The number must always be 704 specified and unique if the output corresponds to a single 705 channel. 706 Some drivers have additional constraints: 707 ADF4371 has an integrated VCO with fundamendal output 708 frequency ranging from 4000000000 Hz 8000000000 Hz. 709 710 out_altvoltage0_frequency: 711 A divide by 1, 2, 4, 8, 16, 32 or circuit generates 712 frequencies from 62500000 Hz to 8000000000 Hz. 713 out_altvoltage1_frequency: 714 This channel duplicates the channel 0 frequency 715 out_altvoltage2_frequency: 716 A frequency doubler generates frequencies from 717 8000000000 Hz to 16000000000 Hz. 718 out_altvoltage3_frequency: 719 A frequency quadrupler generates frequencies from 720 16000000000 Hz to 32000000000 Hz. 721 722 Note: writes to one of the channels will affect the frequency of 723 all the other channels, since it involves changing the VCO 724 fundamental output frequency. 725 726What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase 727KernelVersion: 3.4.0 728Contact: linux-iio@vger.kernel.org 729Description: 730 Phase in radians of one frequency/clock output Y 731 (out_altvoltageY) relative to another frequency/clock output 732 (out_altvoltageZ) of the device X. The number must always be 733 specified and unique if the output corresponds to a single 734 channel. 735 736What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw 737Date: May 2012 738KernelVersion: 3.5 739Contact: Johan Hovold <jhovold@gmail.com> 740Description: 741 Set/get output current for channel Y. Units after application 742 of scale and offset are milliamps. 743 For some devices current channels are used to specify 744 current supplied to elements used in taking a measurement 745 of a different type. E.g. LED currents. 746 747What: /sys/bus/iio/devices/iio:deviceX/events 748KernelVersion: 2.6.35 749Contact: linux-iio@vger.kernel.org 750Description: 751 Configuration of which hardware generated events are passed up 752 to user-space. 753 754What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en 755What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en 756What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en 757What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en 758What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en 759What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en 760What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en 761What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en 762What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en 763What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en 764What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en 765What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en 766What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en 767What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en 768What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en 769What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en 770What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en 771What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en 772What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en 773What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en 774What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en 775What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en 776What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en 777What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en 778What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en 779What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en 780What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en 781What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en 782What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en 783What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en 784What: /sys/.../iio:deviceX/events/in_voltageY_thresh_either_en 785What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en 786What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en 787What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_rising_en 788What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_falling_en 789KernelVersion: 2.6.37 790Contact: linux-iio@vger.kernel.org 791Description: 792 Event generated when channel passes a threshold in the specified 793 (_rising|_falling) direction. If the direction is not specified, 794 then either the device will report an event which ever direction 795 a single threshold value is passed in (e.g. 796 <type>[Y][_name]_<raw|input>_thresh_value) or 797 <type>[Y][_name]_<raw|input>_thresh_rising_value and 798 <type>[Y][_name]_<raw|input>_thresh_falling_value may take 799 different values, but the device can only enable both thresholds 800 or neither. 801 802 Note the driver will assume the last p events requested are 803 to be enabled where p is how many it supports (which may vary 804 depending on the exact set requested. So if you want to be 805 sure you have set what you think you have, check the contents of 806 these attributes after everything is configured. Drivers may 807 have to buffer any parameters so that they are consistent when 808 a given event type is enabled at a future point (and not those for 809 whatever event was previously enabled). 810 811What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en 812What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en 813What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en 814What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en 815What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en 816What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en 817What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en 818What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en 819What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en 820What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en 821What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en 822What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en 823What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en 824What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en 825What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en 826What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en 827What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en 828What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en 829What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en 830What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en 831What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en 832What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en 833What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en 834What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en 835What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en 836What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en 837What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en 838What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en 839What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en 840What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en 841What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en 842What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en 843KernelVersion: 2.6.37 844Contact: linux-iio@vger.kernel.org 845Description: 846 Event generated when channel passes a threshold on the rate of 847 change (1st differential) in the specified (_rising|_falling) 848 direction. If the direction is not specified, then either the 849 device will report an event which ever direction a single 850 threshold value is passed in (e.g. 851 <type>[Y][_name]_<raw|input>_roc_value) or 852 <type>[Y][_name]_<raw|input>_roc_rising_value and 853 <type>[Y][_name]_<raw|input>_roc_falling_value may take 854 different values, but the device can only enable both rate of 855 change thresholds or neither. 856 857 Note the driver will assume the last p events requested are 858 to be enabled where p is however many it supports (which may 859 vary depending on the exact set requested. So if you want to be 860 sure you have set what you think you have, check the contents of 861 these attributes after everything is configured. Drivers may 862 have to buffer any parameters so that they are consistent when 863 a given event type is enabled a future point (and not those for 864 whatever event was previously enabled). 865 866What: /sys/.../events/in_capacitanceY_adaptive_thresh_rising_en 867What: /sys/.../events/in_capacitanceY_adaptive_thresh_falling_en 868KernelVersion: 5.13 869Contact: linux-iio@vger.kernel.org 870Description: 871 Adaptive thresholds are similar to normal fixed thresholds 872 but the value is expressed as an offset from a value which 873 provides a low frequency approximation of the channel itself. 874 Thus these detect if a rapid change occurs in the specified 875 direction which crosses tracking value + offset. 876 Tracking value calculation is devices specific. 877 878What: /sys/.../in_capacitanceY_adaptive_thresh_rising_timeout 879What: /sys/.../in_capacitanceY_adaptive_thresh_falling_timeout 880KernelVersion: 5.11 881Contact: linux-iio@vger.kernel.org 882Description: 883 When adaptive thresholds are used, the tracking signal 884 may adjust too slowly to step changes in the raw signal. 885 Thus these specify the time in seconds for which the 886 difference between the slow tracking signal and the raw 887 signal is allowed to remain out-of-range before a reset 888 event occurs in which the tracking signal is made equal 889 to the raw signal, allowing slow tracking to resume and the 890 adaptive threshold event detection to function as expected. 891 892What: /sys/.../events/in_accel_thresh_rising_value 893What: /sys/.../events/in_accel_thresh_falling_value 894What: /sys/.../events/in_accel_x_raw_thresh_rising_value 895What: /sys/.../events/in_accel_x_raw_thresh_falling_value 896What: /sys/.../events/in_accel_y_raw_thresh_rising_value 897What: /sys/.../events/in_accel_y_raw_thresh_falling_value 898What: /sys/.../events/in_accel_z_raw_thresh_rising_value 899What: /sys/.../events/in_accel_z_raw_thresh_falling_value 900What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value 901What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value 902What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value 903What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value 904What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value 905What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value 906What: /sys/.../events/in_magn_x_raw_thresh_rising_value 907What: /sys/.../events/in_magn_x_raw_thresh_falling_value 908What: /sys/.../events/in_magn_y_raw_thresh_rising_value 909What: /sys/.../events/in_magn_y_raw_thresh_falling_value 910What: /sys/.../events/in_magn_z_raw_thresh_rising_value 911What: /sys/.../events/in_magn_z_raw_thresh_falling_value 912What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value 913What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value 914What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value 915What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value 916What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value 917What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value 918What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value 919What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value 920What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value 921What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value 922What: /sys/.../events/in_voltageY_raw_thresh_rising_value 923What: /sys/.../events/in_voltageY_raw_thresh_falling_value 924What: /sys/.../events/in_tempY_raw_thresh_rising_value 925What: /sys/.../events/in_tempY_raw_thresh_falling_value 926What: /sys/.../events/in_illuminance0_thresh_falling_value 927What: /sys/.../events/in_illuminance0_thresh_rising_value 928What: /sys/.../events/in_proximity0_thresh_falling_value 929What: /sys/.../events/in_proximity0_thresh_rising_value 930What: /sys/.../events/in_illuminance_thresh_rising_value 931What: /sys/.../events/in_illuminance_thresh_falling_value 932What: /sys/.../events/in_capacitanceY_thresh_rising_value 933What: /sys/.../events/in_capacitanceY_thresh_falling_value 934What: /sys/.../events/in_capacitanceY_thresh_adaptive_rising_value 935What: /sys/.../events/in_capacitanceY_thresh_falling_rising_value 936KernelVersion: 2.6.37 937Contact: linux-iio@vger.kernel.org 938Description: 939 Specifies the value of threshold that the device is comparing 940 against for the events enabled by 941 <type>Y[_name]_thresh[_rising|falling]_en. 942 943 If separate attributes exist for the two directions, but 944 direction is not specified for this attribute, then a single 945 threshold value applies to both directions. 946 947 The raw or input element of the name indicates whether the 948 value is in raw device units or in processed units (as _raw 949 and _input do on sysfs direct channel read attributes). 950 951What: /sys/.../events/in_accel_scale 952What: /sys/.../events/in_accel_peak_scale 953What: /sys/.../events/in_anglvel_scale 954What: /sys/.../events/in_magn_scale 955What: /sys/.../events/in_rot_from_north_magnetic_scale 956What: /sys/.../events/in_rot_from_north_true_scale 957What: /sys/.../events/in_voltage_scale 958What: /sys/.../events/in_voltage_supply_scale 959What: /sys/.../events/in_temp_scale 960What: /sys/.../events/in_illuminance_scale 961What: /sys/.../events/in_proximity_scale 962KernelVersion: 3.21 963Contact: linux-iio@vger.kernel.org 964Description: 965 Specifies the conversion factor from the standard units 966 to device specific units used to set the event trigger 967 threshold. 968 969What: /sys/.../events/in_accel_x_thresh_rising_hysteresis 970What: /sys/.../events/in_accel_x_thresh_falling_hysteresis 971What: /sys/.../events/in_accel_x_thresh_either_hysteresis 972What: /sys/.../events/in_accel_y_thresh_rising_hysteresis 973What: /sys/.../events/in_accel_y_thresh_falling_hysteresis 974What: /sys/.../events/in_accel_y_thresh_either_hysteresis 975What: /sys/.../events/in_accel_z_thresh_rising_hysteresis 976What: /sys/.../events/in_accel_z_thresh_falling_hysteresis 977What: /sys/.../events/in_accel_z_thresh_either_hysteresis 978What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis 979What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis 980What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis 981What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis 982What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis 983What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis 984What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis 985What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis 986What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis 987What: /sys/.../events/in_magn_x_thresh_rising_hysteresis 988What: /sys/.../events/in_magn_x_thresh_falling_hysteresis 989What: /sys/.../events/in_magn_x_thresh_either_hysteresis 990What: /sys/.../events/in_magn_y_thresh_rising_hysteresis 991What: /sys/.../events/in_magn_y_thresh_falling_hysteresis 992What: /sys/.../events/in_magn_y_thresh_either_hysteresis 993What: /sys/.../events/in_magn_z_thresh_rising_hysteresis 994What: /sys/.../events/in_magn_z_thresh_falling_hysteresis 995What: /sys/.../events/in_magn_z_thresh_either_hysteresis 996What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis 997What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis 998What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis 999What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis 1000What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis 1001What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis 1002What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis 1003What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis 1004What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis 1005What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis 1006What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis 1007What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis 1008What: /sys/.../events/in_voltageY_thresh_rising_hysteresis 1009What: /sys/.../events/in_voltageY_thresh_falling_hysteresis 1010What: /sys/.../events/in_voltageY_thresh_either_hysteresis 1011What: /sys/.../events/in_tempY_thresh_rising_hysteresis 1012What: /sys/.../events/in_tempY_thresh_falling_hysteresis 1013What: /sys/.../events/in_tempY_thresh_either_hysteresis 1014What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis 1015What: /sys/.../events/in_illuminance0_thresh_rising_hysteresis 1016What: /sys/.../events/in_illuminance0_thresh_either_hysteresis 1017What: /sys/.../events/in_proximity0_thresh_falling_hysteresis 1018What: /sys/.../events/in_proximity0_thresh_rising_hysteresis 1019What: /sys/.../events/in_proximity0_thresh_either_hysteresis 1020KernelVersion: 3.13 1021Contact: linux-iio@vger.kernel.org 1022Description: 1023 Specifies the hysteresis of threshold that the device is comparing 1024 against for the events enabled by 1025 <type>Y[_name]_thresh[_(rising|falling)]_hysteresis. 1026 If separate attributes exist for the two directions, but 1027 direction is not specified for this attribute, then a single 1028 hysteresis value applies to both directions. 1029 1030 For falling events the hysteresis is added to the _value attribute for 1031 this event to get the upper threshold for when the event goes back to 1032 normal, for rising events the hysteresis is subtracted from the _value 1033 attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 1034 and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event 1035 will get activated once in_voltage0_raw goes above 1200 and will become 1036 deactivated again once the value falls below 1150. 1037 1038What: /sys/.../events/in_accel_x_raw_roc_rising_value 1039What: /sys/.../events/in_accel_x_raw_roc_falling_value 1040What: /sys/.../events/in_accel_y_raw_roc_rising_value 1041What: /sys/.../events/in_accel_y_raw_roc_falling_value 1042What: /sys/.../events/in_accel_z_raw_roc_rising_value 1043What: /sys/.../events/in_accel_z_raw_roc_falling_value 1044What: /sys/.../events/in_anglvel_x_raw_roc_rising_value 1045What: /sys/.../events/in_anglvel_x_raw_roc_falling_value 1046What: /sys/.../events/in_anglvel_y_raw_roc_rising_value 1047What: /sys/.../events/in_anglvel_y_raw_roc_falling_value 1048What: /sys/.../events/in_anglvel_z_raw_roc_rising_value 1049What: /sys/.../events/in_anglvel_z_raw_roc_falling_value 1050What: /sys/.../events/in_magn_x_raw_roc_rising_value 1051What: /sys/.../events/in_magn_x_raw_roc_falling_value 1052What: /sys/.../events/in_magn_y_raw_roc_rising_value 1053What: /sys/.../events/in_magn_y_raw_roc_falling_value 1054What: /sys/.../events/in_magn_z_raw_roc_rising_value 1055What: /sys/.../events/in_magn_z_raw_roc_falling_value 1056What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value 1057What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value 1058What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value 1059What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value 1060What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value 1061What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value 1062What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value 1063What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value 1064What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value 1065What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value 1066What: /sys/.../events/in_voltageY_raw_roc_rising_value 1067What: /sys/.../events/in_voltageY_raw_roc_falling_value 1068What: /sys/.../events/in_tempY_raw_roc_rising_value 1069What: /sys/.../events/in_tempY_raw_roc_falling_value 1070KernelVersion: 2.6.37 1071Contact: linux-iio@vger.kernel.org 1072Description: 1073 Specifies the value of rate of change threshold that the 1074 device is comparing against for the events enabled by 1075 <type>[Y][_name]_roc[_rising|falling]_en. 1076 1077 If separate attributes exist for the two directions, 1078 but direction is not specified for this attribute, 1079 then a single threshold value applies to both directions. 1080 The raw or input element of the name indicates whether the 1081 value is in raw device units or in processed units (as _raw 1082 and _input do on sysfs direct channel read attributes). 1083 1084What: /sys/.../events/in_accel_x_thresh_rising_period 1085What: /sys/.../events/in_accel_x_thresh_falling_period 1086What: /sys/.../events/in_accel_x_roc_rising_period 1087What: /sys/.../events/in_accel_x_roc_falling_period 1088What: /sys/.../events/in_accel_y_thresh_rising_period 1089What: /sys/.../events/in_accel_y_thresh_falling_period 1090What: /sys/.../events/in_accel_y_roc_rising_period 1091What: /sys/.../events/in_accel_y_roc_falling_period 1092What: /sys/.../events/in_accel_z_thresh_rising_period 1093What: /sys/.../events/in_accel_z_thresh_falling_period 1094What: /sys/.../events/in_accel_z_roc_rising_period 1095What: /sys/.../events/in_accel_z_roc_falling_period 1096What: /sys/.../events/in_anglvel_x_thresh_rising_period 1097What: /sys/.../events/in_anglvel_x_thresh_falling_period 1098What: /sys/.../events/in_anglvel_x_roc_rising_period 1099What: /sys/.../events/in_anglvel_x_roc_falling_period 1100What: /sys/.../events/in_anglvel_y_thresh_rising_period 1101What: /sys/.../events/in_anglvel_y_thresh_falling_period 1102What: /sys/.../events/in_anglvel_y_roc_rising_period 1103What: /sys/.../events/in_anglvel_y_roc_falling_period 1104What: /sys/.../events/in_anglvel_z_thresh_rising_period 1105What: /sys/.../events/in_anglvel_z_thresh_falling_period 1106What: /sys/.../events/in_anglvel_z_roc_rising_period 1107What: /sys/.../events/in_anglvel_z_roc_falling_period 1108What: /sys/.../events/in_magn_x_thresh_rising_period 1109What: /sys/.../events/in_magn_x_thresh_falling_period 1110What: /sys/.../events/in_magn_x_roc_rising_period 1111What: /sys/.../events/in_magn_x_roc_falling_period 1112What: /sys/.../events/in_magn_y_thresh_rising_period 1113What: /sys/.../events/in_magn_y_thresh_falling_period 1114What: /sys/.../events/in_magn_y_roc_rising_period 1115What: /sys/.../events/in_magn_y_roc_falling_period 1116What: /sys/.../events/in_magn_z_thresh_rising_period 1117What: /sys/.../events/in_magn_z_thresh_falling_period 1118What: /sys/.../events/in_magn_z_roc_rising_period 1119What: /sys/.../events/in_magn_z_roc_falling_period 1120What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period 1121What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period 1122What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period 1123What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period 1124What: /sys/.../events/in_rot_from_north_true_thresh_rising_period 1125What: /sys/.../events/in_rot_from_north_true_thresh_falling_period 1126What: /sys/.../events/in_rot_from_north_true_roc_rising_period 1127What: /sys/.../events/in_rot_from_north_true_roc_falling_period 1128What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period 1129What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period 1130What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period 1131What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period 1132What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period 1133What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period 1134What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period 1135What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period 1136What: /sys/.../events/in_voltageY_supply_thresh_rising_period 1137What: /sys/.../events/in_voltageY_supply_thresh_falling_period 1138What: /sys/.../events/in_voltageY_supply_roc_rising_period 1139What: /sys/.../events/in_voltageY_supply_roc_falling_period 1140What: /sys/.../events/in_voltageY_thresh_rising_period 1141What: /sys/.../events/in_voltageY_thresh_falling_period 1142What: /sys/.../events/in_voltageY_roc_rising_period 1143What: /sys/.../events/in_voltageY_roc_falling_period 1144What: /sys/.../events/in_tempY_thresh_rising_period 1145What: /sys/.../events/in_tempY_thresh_falling_period 1146What: /sys/.../events/in_tempY_roc_rising_period 1147What: /sys/.../events/in_tempY_roc_falling_period 1148What: /sys/.../events/in_accel_x&y&z_mag_falling_period 1149What: /sys/.../events/in_intensity0_thresh_period 1150What: /sys/.../events/in_proximity0_thresh_period 1151What: /sys/.../events/in_activity_still_thresh_rising_period 1152What: /sys/.../events/in_activity_still_thresh_falling_period 1153What: /sys/.../events/in_activity_walking_thresh_rising_period 1154What: /sys/.../events/in_activity_walking_thresh_falling_period 1155What: /sys/.../events/in_activity_jogging_thresh_rising_period 1156What: /sys/.../events/in_activity_jogging_thresh_falling_period 1157What: /sys/.../events/in_activity_running_thresh_rising_period 1158What: /sys/.../events/in_activity_running_thresh_falling_period 1159What: /sys/.../events/in_illuminance_thresh_either_period 1160KernelVersion: 2.6.37 1161Contact: linux-iio@vger.kernel.org 1162Description: 1163 Period of time (in seconds) for which the condition must be 1164 met before an event is generated. If direction is not 1165 specified then this period applies to both directions. 1166 1167What: /sys/.../events/in_accel_thresh_rising_low_pass_filter_3db 1168What: /sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db 1169What: /sys/.../events/in_magn_thresh_rising_low_pass_filter_3db 1170KernelVersion: 4.2 1171Contact: linux-iio@vger.kernel.org 1172Description: 1173 If a low pass filter can be applied to the event generation 1174 this property gives its 3db frequency in Hz. 1175 A value of zero disables the filter. 1176 1177What: /sys/.../events/in_accel_thresh_rising_high_pass_filter_3db 1178What: /sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db 1179What: /sys/.../events/in_magn_thresh_rising_high_pass_filter_3db 1180KernelVersion: 4.2 1181Contact: linux-iio@vger.kernel.org 1182Description: 1183 If a high pass filter can be applied to the event generation 1184 this property gives its 3db frequency in Hz. 1185 A value of zero disables the filter. 1186 1187What: /sys/.../events/in_activity_still_thresh_rising_en 1188What: /sys/.../events/in_activity_still_thresh_falling_en 1189What: /sys/.../events/in_activity_walking_thresh_rising_en 1190What: /sys/.../events/in_activity_walking_thresh_falling_en 1191What: /sys/.../events/in_activity_jogging_thresh_rising_en 1192What: /sys/.../events/in_activity_jogging_thresh_falling_en 1193What: /sys/.../events/in_activity_running_thresh_rising_en 1194What: /sys/.../events/in_activity_running_thresh_falling_en 1195KernelVersion: 3.19 1196Contact: linux-iio@vger.kernel.org 1197Description: 1198 Enables or disables activity events. Depending on direction 1199 an event is generated when sensor ENTERS or LEAVES a given state. 1200 1201What: /sys/.../events/in_activity_still_thresh_rising_value 1202What: /sys/.../events/in_activity_still_thresh_falling_value 1203What: /sys/.../events/in_activity_walking_thresh_rising_value 1204What: /sys/.../events/in_activity_walking_thresh_falling_value 1205What: /sys/.../events/in_activity_jogging_thresh_rising_value 1206What: /sys/.../events/in_activity_jogging_thresh_falling_value 1207What: /sys/.../events/in_activity_running_thresh_rising_value 1208What: /sys/.../events/in_activity_running_thresh_falling_value 1209KernelVersion: 3.19 1210Contact: linux-iio@vger.kernel.org 1211Description: 1212 Confidence value (in units as percentage) to be used 1213 for deciding when an event should be generated. E.g for 1214 running: If the confidence value reported by the sensor 1215 is greater than in_activity_running_thresh_rising_value 1216 then the sensor ENTERS running state. Conversely, if the 1217 confidence value reported by the sensor is lower than 1218 in_activity_running_thresh_falling_value then the sensor 1219 is LEAVING running state. 1220 1221What: /sys/.../iio:deviceX/events/in_accel_mag_en 1222What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en 1223What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en 1224What: /sys/.../iio:deviceX/events/in_accel_x_mag_en 1225What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en 1226What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en 1227What: /sys/.../iio:deviceX/events/in_accel_y_mag_en 1228What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en 1229What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en 1230What: /sys/.../iio:deviceX/events/in_accel_z_mag_en 1231What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en 1232What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en 1233What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en 1234What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en 1235KernelVersion: 2.6.37 1236Contact: linux-iio@vger.kernel.org 1237Description: 1238 Similar to in_accel_x_thresh[_rising|_falling]_en, but here the 1239 magnitude of the channel is compared to the threshold, not its 1240 signed value. 1241 1242What: /sys/.../events/in_accel_raw_mag_value 1243What: /sys/.../events/in_accel_x_raw_mag_rising_value 1244What: /sys/.../events/in_accel_y_raw_mag_rising_value 1245What: /sys/.../events/in_accel_z_raw_mag_rising_value 1246KernelVersion: 2.6.37 1247Contact: linux-iio@vger.kernel.org 1248Description: 1249 The value to which the magnitude of the channel is compared. If 1250 number or direction is not specified, applies to all channels of 1251 this type. 1252 1253What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_en 1254What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en 1255What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en 1256What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_en 1257What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_en 1258What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_en 1259KernelVersion: 5.18 1260Contact: linux-iio@vger.kernel.org 1261Description: 1262 Similar to in_accel_mag[_y][_rising|_falling]_en, but the event 1263 value is relative to a reference magnitude. The reference magnitude 1264 includes the graviational acceleration. 1265 1266What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_value 1267What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_value 1268What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_value 1269What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_value 1270What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_value 1271What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_value 1272KernelVersion: 5.18 1273Contact: linux-iio@vger.kernel.org 1274Description: 1275 The value to which the reference magnitude of the channel is 1276 compared. If the axis is not specified, it applies to all channels 1277 of this type. 1278 1279What: /sys/.../events/in_steps_change_en 1280KernelVersion: 4.0 1281Contact: linux-iio@vger.kernel.org 1282Description: 1283 Event generated when channel passes a threshold on the absolute 1284 change in value. E.g. for steps: a step change event is 1285 generated each time the user takes N steps, where N is set using 1286 in_steps_change_value. 1287 1288What: /sys/.../events/in_steps_change_value 1289KernelVersion: 4.0 1290Contact: linux-iio@vger.kernel.org 1291Description: 1292 Specifies the value of change threshold that the 1293 device is comparing against for the events enabled by 1294 <type>[Y][_name]_roc[_rising|falling|]_en. E.g. for steps: 1295 if set to 3, a step change event will be generated every 3 1296 steps. 1297 1298What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger 1299KernelVersion: 2.6.35 1300Contact: linux-iio@vger.kernel.org 1301Description: 1302 The name of the trigger source being used, as per string given 1303 in /sys/class/iio/triggerY/name. 1304 1305What: /sys/bus/iio/devices/iio:deviceX/bufferY/length 1306KernelVersion: 5.11 1307Contact: linux-iio@vger.kernel.org 1308Description: 1309 Number of scans contained by the buffer. 1310 1311What: /sys/bus/iio/devices/iio:deviceX/bufferY/enable 1312KernelVersion: 5.11 1313Contact: linux-iio@vger.kernel.org 1314Description: 1315 Actually start the buffer capture up. Will start trigger 1316 if first device and appropriate. 1317 1318 Note that it might be impossible to configure other attributes, 1319 (e.g.: events, scale, sampling rate) if they impact the currently 1320 active buffer capture session. 1321 1322What: /sys/bus/iio/devices/iio:deviceX/bufferY 1323KernelVersion: 5.11 1324Contact: linux-iio@vger.kernel.org 1325Description: 1326 Directory containing interfaces for elements that will be 1327 captured for a single triggered sample set in the buffer. 1328 1329 Since kernel 5.11 the scan_elements attributes are merged into 1330 the bufferY directory, to be configurable per buffer. 1331 1332What: /sys/.../iio:deviceX/bufferY/in_accel_x_en 1333What: /sys/.../iio:deviceX/bufferY/in_accel_y_en 1334What: /sys/.../iio:deviceX/bufferY/in_accel_z_en 1335What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_en 1336What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_en 1337What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_en 1338What: /sys/.../iio:deviceX/bufferY/in_magn_x_en 1339What: /sys/.../iio:deviceX/bufferY/in_magn_y_en 1340What: /sys/.../iio:deviceX/bufferY/in_magn_z_en 1341What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_en 1342What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_en 1343What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_en 1344What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_en 1345What: /sys/.../iio:deviceX/bufferY/in_timestamp_en 1346What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_en 1347What: /sys/.../iio:deviceX/bufferY/in_voltageY_en 1348What: /sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en 1349What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_en 1350What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_en 1351What: /sys/.../iio:deviceX/bufferY/in_voltage_i_en 1352What: /sys/.../iio:deviceX/bufferY/in_voltage_q_en 1353What: /sys/.../iio:deviceX/bufferY/in_incli_x_en 1354What: /sys/.../iio:deviceX/bufferY/in_incli_y_en 1355What: /sys/.../iio:deviceX/bufferY/in_pressureY_en 1356What: /sys/.../iio:deviceX/bufferY/in_pressure_en 1357What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_en 1358What: /sys/.../iio:deviceX/bufferY/in_proximity_en 1359KernelVersion: 5.11 1360Contact: linux-iio@vger.kernel.org 1361Description: 1362 Scan element control for triggered data capture. 1363 1364What: /sys/.../iio:deviceX/bufferY/in_accel_type 1365What: /sys/.../iio:deviceX/bufferY/in_anglvel_type 1366What: /sys/.../iio:deviceX/bufferY/in_magn_type 1367What: /sys/.../iio:deviceX/bufferY/in_incli_type 1368What: /sys/.../iio:deviceX/bufferY/in_voltageY_type 1369What: /sys/.../iio:deviceX/bufferY/in_voltage_type 1370What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_type 1371What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_type 1372What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_type 1373What: /sys/.../iio:deviceX/bufferY/in_voltage_i_type 1374What: /sys/.../iio:deviceX/bufferY/in_voltage_q_type 1375What: /sys/.../iio:deviceX/bufferY/in_timestamp_type 1376What: /sys/.../iio:deviceX/bufferY/in_pressureY_type 1377What: /sys/.../iio:deviceX/bufferY/in_pressure_type 1378What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_type 1379What: /sys/.../iio:deviceX/bufferY/in_proximity_type 1380KernelVersion: 5.11 1381Contact: linux-iio@vger.kernel.org 1382Description: 1383 Description of the scan element data storage within the buffer 1384 and hence the form in which it is read from user-space. 1385 Form is [be|le]:[s|u]bits/storagebits[>>shift]. 1386 be or le specifies big or little endian. s or u specifies if 1387 signed (2's complement) or unsigned. bits is the number of bits 1388 of data and storagebits is the space (after padding) that it 1389 occupies in the buffer. shift if specified, is the shift that 1390 needs to be applied prior to masking out unused bits. Some 1391 devices put their data in the middle of the transferred elements 1392 with additional information on both sides. Note that some 1393 devices will have additional information in the unused bits 1394 so to get a clean value, the bits value must be used to mask 1395 the buffer output value appropriately. The storagebits value 1396 also specifies the data alignment. So s48/64>>2 will be a 1397 signed 48 bit integer stored in a 64 bit location aligned to 1398 a 64 bit boundary. To obtain the clean value, shift right 2 1399 and apply a mask to zero the top 16 bits of the result. 1400 For other storage combinations this attribute will be extended 1401 appropriately. 1402 1403What: /sys/.../iio:deviceX/scan_elements/in_accel_type_available 1404KernelVersion: 2.6.37 1405Contact: linux-iio@vger.kernel.org 1406Description: 1407 If the type parameter can take one of a small set of values, 1408 this attribute lists them. 1409 1410What: /sys/.../iio:deviceX/bufferY/in_voltageY_index 1411What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_index 1412What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_index 1413What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_index 1414What: /sys/.../iio:deviceX/bufferY/in_voltage_i_index 1415What: /sys/.../iio:deviceX/bufferY/in_voltage_q_index 1416What: /sys/.../iio:deviceX/bufferY/in_accel_x_index 1417What: /sys/.../iio:deviceX/bufferY/in_accel_y_index 1418What: /sys/.../iio:deviceX/bufferY/in_accel_z_index 1419What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_index 1420What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_index 1421What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_index 1422What: /sys/.../iio:deviceX/bufferY/in_magn_x_index 1423What: /sys/.../iio:deviceX/bufferY/in_magn_y_index 1424What: /sys/.../iio:deviceX/bufferY/in_magn_z_index 1425What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_index 1426What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_index 1427What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_index 1428What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_index 1429What: /sys/.../iio:deviceX/bufferY/in_incli_x_index 1430What: /sys/.../iio:deviceX/bufferY/in_incli_y_index 1431What: /sys/.../iio:deviceX/bufferY/in_timestamp_index 1432What: /sys/.../iio:deviceX/bufferY/in_pressureY_index 1433What: /sys/.../iio:deviceX/bufferY/in_pressure_index 1434What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_index 1435What: /sys/.../iio:deviceX/bufferY/in_proximity_index 1436KernelVersion: 5.11 1437Contact: linux-iio@vger.kernel.org 1438Description: 1439 A single positive integer specifying the position of this 1440 scan element in the buffer. Note these are not dependent on 1441 what is enabled and may not be contiguous. Thus for user-space 1442 to establish the full layout these must be used in conjunction 1443 with all _en attributes to establish which channels are present, 1444 and the relevant _type attributes to establish the data storage 1445 format. 1446 1447What: /sys/.../iio:deviceX/in_activity_still_input 1448What: /sys/.../iio:deviceX/in_activity_walking_input 1449What: /sys/.../iio:deviceX/in_activity_jogging_input 1450What: /sys/.../iio:deviceX/in_activity_running_input 1451KernelVersion: 3.19 1452Contact: linux-iio@vger.kernel.org 1453Description: 1454 This attribute is used to read the confidence for an activity 1455 expressed in units as percentage. 1456 1457What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw 1458KernelVersion: 2.6.38 1459Contact: linux-iio@vger.kernel.org 1460Description: 1461 This attribute is used to read the amount of quadrature error 1462 present in the device at a given time. 1463 1464What: /sys/.../iio:deviceX/in_accelX_power_mode 1465KernelVersion: 3.11 1466Contact: linux-iio@vger.kernel.org 1467Description: 1468 Specifies the chip power mode. 1469 low_noise: reduce noise level from ADC, 1470 low_power: enable low current consumption. 1471 For a list of available output power modes read 1472 in_accel_power_mode_available. 1473 1474What: /sys/.../iio:deviceX/in_energy_input 1475What: /sys/.../iio:deviceX/in_energy_raw 1476KernelVersion: 4.0 1477Contact: linux-iio@vger.kernel.org 1478Description: 1479 This attribute is used to read the energy value reported by the 1480 device (e.g.: human activity sensors report energy burnt by the 1481 user). Units after application of scale are Joules. 1482 1483What: /sys/.../iio:deviceX/in_distance_input 1484What: /sys/.../iio:deviceX/in_distance_raw 1485KernelVersion: 4.0 1486Contact: linux-iio@vger.kernel.org 1487Description: 1488 This attribute is used to read the measured distance to an object 1489 or the distance covered by the user since the last reboot while 1490 activated. Units after application of scale are meters. 1491 1492What: /sys/bus/iio/devices/iio:deviceX/store_eeprom 1493KernelVersion: 3.4.0 1494Contact: linux-iio@vger.kernel.org 1495Description: 1496 Writing '1' stores the current device configuration into 1497 on-chip EEPROM. After power-up or chip reset the device will 1498 automatically load the saved configuration. 1499 1500What: /sys/.../iio:deviceX/in_proximity_raw 1501What: /sys/.../iio:deviceX/in_proximity_input 1502What: /sys/.../iio:deviceX/in_proximityY_raw 1503KernelVersion: 3.4 1504Contact: linux-iio@vger.kernel.org 1505Description: 1506 Proximity measurement indicating that some 1507 object is near the sensor, usually by observing 1508 reflectivity of infrared or ultrasound emitted. 1509 1510 Often these sensors are unit less and as such conversion 1511 to SI units is not possible. Higher proximity measurements 1512 indicate closer objects, and vice versa. Units after 1513 application of scale and offset are meters. 1514 1515What: /sys/.../iio:deviceX/in_illuminance_input 1516What: /sys/.../iio:deviceX/in_illuminance_raw 1517What: /sys/.../iio:deviceX/in_illuminanceY_input 1518What: /sys/.../iio:deviceX/in_illuminanceY_raw 1519What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw 1520What: /sys/.../iio:deviceX/in_illuminance_ir_raw 1521What: /sys/.../iio:deviceX/in_illuminance_clear_raw 1522KernelVersion: 3.4 1523Contact: linux-iio@vger.kernel.org 1524Description: 1525 Illuminance measurement, units after application of scale 1526 and offset are lux. 1527 1528What: /sys/.../iio:deviceX/in_intensityY_raw 1529What: /sys/.../iio:deviceX/in_intensityY_ir_raw 1530What: /sys/.../iio:deviceX/in_intensityY_both_raw 1531What: /sys/.../iio:deviceX/in_intensityY_uv_raw 1532What: /sys/.../iio:deviceX/in_intensityY_duv_raw 1533KernelVersion: 3.4 1534Contact: linux-iio@vger.kernel.org 1535Description: 1536 Unit-less light intensity. Modifiers both and ir indicate 1537 that measurements contain visible and infrared light 1538 components or just infrared light, respectively. Modifier 1539 uv indicates that measurements contain ultraviolet light 1540 components. Modifier duv indicates that measurements 1541 contain deep ultraviolet light components. 1542 1543What: /sys/.../iio:deviceX/in_uvindex_input 1544KernelVersion: 4.6 1545Contact: linux-iio@vger.kernel.org 1546Description: 1547 UV light intensity index measuring the human skin's response to 1548 different wavelength of sunlight weighted according to the 1549 standardised CIE Erythemal Action Spectrum. UV index values range 1550 from 0 (low) to >=11 (extreme). 1551 1552What: /sys/.../iio:deviceX/in_intensity_integration_time 1553What: /sys/.../iio:deviceX/in_intensity_red_integration_time 1554What: /sys/.../iio:deviceX/in_intensity_green_integration_time 1555What: /sys/.../iio:deviceX/in_intensity_blue_integration_time 1556What: /sys/.../iio:deviceX/in_intensity_clear_integration_time 1557What: /sys/.../iio:deviceX/in_illuminance_integration_time 1558KernelVersion: 3.12 1559Contact: linux-iio@vger.kernel.org 1560Description: 1561 This attribute is used to get/set the integration time in 1562 seconds. If shared across all channels of a given type, 1563 <type>_integration_time is used. 1564 1565What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time 1566KernelVersion: 4.0 1567Contact: linux-iio@vger.kernel.org 1568Description: 1569 Number of seconds in which to compute speed. 1570 1571What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw 1572KernelVersion: 3.15 1573Contact: linux-iio@vger.kernel.org 1574Description: 1575 Raw value of quaternion components using a format 1576 x y z w. Here x, y, and z component represents the axis about 1577 which a rotation will occur and w component represents the 1578 amount of rotation. 1579 1580What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw 1581What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw 1582What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw 1583What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw 1584KernelVersion: 3.15 1585Contact: linux-iio@vger.kernel.org 1586Description: 1587 Raw value of rotation from true/magnetic north measured with 1588 or without compensation from tilt sensors. 1589 1590What: /sys/bus/iio/devices/iio:deviceX/in_currentX_raw 1591What: /sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw 1592What: /sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw 1593KernelVersion: 3.18 1594Contact: linux-iio@vger.kernel.org 1595Description: 1596 Raw current measurement from channel X. Units are in milliamps 1597 after application of scale and offset. If no offset or scale is 1598 present, output should be considered as processed with the 1599 unit in milliamps. 1600 1601 Channels with 'i' and 'q' modifiers always exist in pairs and both 1602 channels refer to the same signal. The 'i' channel contains the in-phase 1603 component of the signal while the 'q' channel contains the quadrature 1604 component. 1605 1606What: /sys/.../iio:deviceX/in_energy_en 1607What: /sys/.../iio:deviceX/in_distance_en 1608What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en 1609What: /sys/.../iio:deviceX/in_steps_en 1610KernelVersion: 3.19 1611Contact: linux-iio@vger.kernel.org 1612Description: 1613 Activates a device feature that runs in firmware/hardware. 1614 E.g. for steps: the pedometer saves power while not used; 1615 when activated, it will count the steps taken by the user in 1616 firmware and export them through in_steps_input. 1617 1618What: /sys/.../iio:deviceX/in_steps_input 1619KernelVersion: 3.19 1620Contact: linux-iio@vger.kernel.org 1621Description: 1622 This attribute is used to read the number of steps taken by the user 1623 since the last reboot while activated. 1624 1625What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input 1626What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw 1627KernelVersion: 3.19 1628Contact: linux-iio@vger.kernel.org 1629Description: 1630 This attribute is used to read the current speed value of the 1631 user (which is the norm or magnitude of the velocity vector). 1632 Units after application of scale are m/s. 1633 1634What: /sys/.../iio:deviceX/in_steps_debounce_count 1635KernelVersion: 4.0 1636Contact: linux-iio@vger.kernel.org 1637Description: 1638 Specifies the number of steps that must occur within 1639 in_steps_filter_debounce_time for the pedometer to decide the 1640 consumer is making steps. 1641 1642What: /sys/.../iio:deviceX/in_steps_debounce_time 1643KernelVersion: 4.0 1644Contact: linux-iio@vger.kernel.org 1645Description: 1646 Specifies number of seconds in which we compute the steps 1647 that occur in order to decide if the consumer is making steps. 1648 1649What: /sys/bus/iio/devices/iio:deviceX/bufferY/watermark 1650KernelVersion: 5.11 1651Contact: linux-iio@vger.kernel.org 1652Description: 1653 A single positive integer specifying the maximum number of scan 1654 elements to wait for. 1655 1656 Poll will block until the watermark is reached. 1657 1658 Blocking read will wait until the minimum between the requested 1659 read amount or the low water mark is available. 1660 1661 Non-blocking read will retrieve the available samples from the 1662 buffer even if there are less samples then watermark level. This 1663 allows the application to block on poll with a timeout and read 1664 the available samples after the timeout expires and thus have a 1665 maximum delay guarantee. 1666 1667What: /sys/bus/iio/devices/iio:deviceX/bufferY/data_available 1668KernelVersion: 5.11 1669Contact: linux-iio@vger.kernel.org 1670Description: 1671 A read-only value indicating the bytes of data available in the 1672 buffer. In the case of an output buffer, this indicates the 1673 amount of empty space available to write data to. In the case of 1674 an input buffer, this indicates the amount of data available for 1675 reading. 1676 1677What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled 1678KernelVersion: 4.2 1679Contact: linux-iio@vger.kernel.org 1680Description: 1681 A read-only boolean value that indicates if the hardware fifo is 1682 currently enabled or disabled. If the device does not have a 1683 hardware fifo this entry is not present. 1684 The hardware fifo is enabled when the buffer is enabled if the 1685 current hardware fifo watermark level is set and other current 1686 device settings allows it (e.g. if a trigger is set that samples 1687 data differently that the hardware fifo does then hardware fifo 1688 will not enabled). 1689 1690 If the hardware fifo is enabled and the level of the hardware 1691 fifo reaches the hardware fifo watermark level the device will 1692 flush its hardware fifo to the device buffer. Doing a non 1693 blocking read on the device when no samples are present in the 1694 device buffer will also force a flush. 1695 1696 When the hardware fifo is enabled there is no need to use a 1697 trigger to use buffer mode since the watermark settings 1698 guarantees that the hardware fifo is flushed to the device 1699 buffer. 1700 1701What: /sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout 1702KernelVersion: 4.12 1703Contact: linux-iio@vger.kernel.org 1704Description: 1705 A read/write property to provide capability to delay reporting of 1706 samples till a timeout is reached. This allows host processors to 1707 sleep, while the sensor is storing samples in its internal fifo. 1708 The maximum timeout in seconds can be specified by setting 1709 hwfifo_timeout.The current delay can be read by reading 1710 hwfifo_timeout. A value of 0 means that there is no timeout. 1711 1712What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark 1713KernelVersion: 4.2 1714Contact: linux-iio@vger.kernel.org 1715Description: 1716 Read-only entry that contains a single integer specifying the 1717 current watermark level for the hardware fifo. If the device 1718 does not have a hardware fifo this entry is not present. 1719 The watermark level for the hardware fifo is set by the driver 1720 based on the value set by the user in buffer/watermark but 1721 taking into account hardware limitations (e.g. most hardware 1722 buffers are limited to 32-64 samples, some hardware buffers 1723 watermarks are fixed or have minimum levels). A value of 0 1724 means that the hardware watermark is unset. 1725 1726What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_min 1727KernelVersion: 4.2 1728Contact: linux-iio@vger.kernel.org 1729Description: 1730 A single positive integer specifying the minimum watermark level 1731 for the hardware fifo of this device. If the device does not 1732 have a hardware fifo this entry is not present. 1733 1734 If the user sets buffer/watermark to a value less than this one, 1735 then the hardware watermark will remain unset. 1736 1737What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_max 1738KernelVersion: 4.2 1739Contact: linux-iio@vger.kernel.org 1740Description: 1741 A single positive integer specifying the maximum watermark level 1742 for the hardware fifo of this device. If the device does not 1743 have a hardware fifo this entry is not present. 1744 1745 If the user sets buffer/watermark to a value greater than this 1746 one, then the hardware watermark will be capped at this value. 1747 1748What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_available 1749KernelVersion: 4.2 1750Contact: linux-iio@vger.kernel.org 1751Description: 1752 A list of positive integers specifying the available watermark 1753 levels for the hardware fifo. This entry is optional and if it 1754 is not present it means that all the values between 1755 hwfifo_watermark_min and hwfifo_watermark_max are supported. 1756 1757 If the user sets buffer/watermark to a value greater than 1758 hwfifo_watermak_min but not equal to any of the values in this 1759 list, the driver will chose an appropriate value for the 1760 hardware fifo watermark level. 1761 1762What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity 1763What: /sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity 1764What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity 1765What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity 1766KernelVersion: 4.1 1767Contact: linux-iio@vger.kernel.org 1768Description: 1769 The emissivity ratio of the surface in the field of view of the 1770 contactless temperature sensor. Emissivity varies from 0 to 1, 1771 with 1 being the emissivity of a black body. 1772 1773What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio 1774What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio 1775What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio 1776KernelVersion: 4.2 1777Contact: linux-iio@vger.kernel.org 1778Description: 1779 Hardware applied number of measurements for acquiring one 1780 data point. The HW will do <type>[_name]_oversampling_ratio 1781 measurements and return the average value as output data. Each 1782 value resulted from <type>[_name]_oversampling_ratio measurements 1783 is considered as one sample for <type>[_name]_sampling_frequency. 1784 1785What: /sys/bus/iio/devices/iio:deviceX/in_concentration_raw 1786What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_raw 1787What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw 1788What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_co2_raw 1789What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw 1790What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw 1791What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw 1792What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw 1793What: /sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw 1794What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_o2_raw 1795What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw 1796What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw 1797KernelVersion: 4.3 1798Contact: linux-iio@vger.kernel.org 1799Description: 1800 Raw (unscaled no offset etc.) reading of a substance. Units 1801 after application of scale and offset are percents. 1802 1803What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw 1804What: /sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw 1805What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw 1806What: /sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw 1807KernelVersion: 4.3 1808Contact: linux-iio@vger.kernel.org 1809Description: 1810 Raw (unscaled no offset etc.) resistance reading. 1811 Units after application of scale and offset are ohms. 1812 1813What: /sys/bus/iio/devices/iio:deviceX/heater_enable 1814KernelVersion: 4.1.0 1815Contact: linux-iio@vger.kernel.org 1816Description: 1817 '1' (enable) or '0' (disable) specifying the enable 1818 of heater function. Same reading values apply. 1819 1820 This ABI is especially applicable for humidity sensors 1821 to heatup the device and get rid of any condensation 1822 in some humidity environment 1823 1824What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw 1825KernelVersion: 4.5 1826Contact: linux-iio@vger.kernel.org 1827Description: 1828 Raw (unscaled no offset etc.) pH reading of a substance as a negative 1829 base-10 logarithm of hydrodium ions in a litre of water. 1830 1831What: /sys/bus/iio/devices/iio:deviceX/mount_matrix 1832What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix 1833What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix 1834What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix 1835What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix 1836KernelVersion: 4.6 1837Contact: linux-iio@vger.kernel.org 1838Description: 1839 Mounting matrix for IIO sensors. This is a rotation matrix which 1840 informs userspace about sensor chip's placement relative to the 1841 main hardware it is mounted on. 1842 1843 Main hardware placement is defined according to the local 1844 reference frame related to the physical quantity the sensor 1845 measures. 1846 1847 Given that the rotation matrix is defined in a board specific 1848 way (platform data and / or device-tree), the main hardware 1849 reference frame definition is left to the implementor's choice 1850 (see below for a magnetometer example). 1851 1852 Applications should apply this rotation matrix to samples so 1853 that when main hardware reference frame is aligned onto local 1854 reference frame, then sensor chip reference frame is also 1855 perfectly aligned with it. 1856 1857 Matrix is a 3x3 unitary matrix and typically looks like 1858 [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix 1859 [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware 1860 are perfectly aligned with each other. 1861 1862 For example, a mounting matrix for a magnetometer sensor informs 1863 userspace about sensor chip's ORIENTATION relative to the main 1864 hardware. 1865 1866 More specifically, main hardware orientation is defined with 1867 respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : 1868 1869 * Y is in the ground plane and positive towards magnetic North ; 1870 * X is in the ground plane, perpendicular to the North axis and 1871 positive towards the East ; 1872 * Z is perpendicular to the ground plane and positive upwards. 1873 1874 An implementor might consider that for a hand-held device, a 1875 'natural' orientation would be 'front facing camera at the top'. 1876 The main hardware reference frame could then be described as : 1877 1878 * Y is in the plane of the screen and is positive towards the 1879 top of the screen ; 1880 * X is in the plane of the screen, perpendicular to Y axis, and 1881 positive towards the right hand side of the screen ; 1882 * Z is perpendicular to the screen plane and positive out of the 1883 screen. 1884 1885 Another example for a quadrotor UAV might be : 1886 1887 * Y is in the plane of the propellers and positive towards the 1888 front-view camera; 1889 * X is in the plane of the propellers, perpendicular to Y axis, 1890 and positive towards the starboard side of the UAV ; 1891 * Z is perpendicular to propellers plane and positive upwards. 1892 1893What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw 1894KernelVersion: 4.8 1895Contact: linux-iio@vger.kernel.org 1896Description: 1897 Raw (unscaled no offset etc.) electric conductivity reading. 1898 Units after application of scale and offset are siemens per 1899 meter. 1900 1901What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw 1902KernelVersion: 4.10 1903Contact: linux-iio@vger.kernel.org 1904Description: 1905 This interface is deprecated; please use the Counter subsystem. 1906 1907 Raw counter device counts from channel Y. For quadrature 1908 counters, multiplication by an available [Y]_scale results in 1909 the counts of a single quadrature signal phase from channel Y. 1910 1911What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw 1912KernelVersion: 4.10 1913Contact: linux-iio@vger.kernel.org 1914Description: 1915 This interface is deprecated; please use the Counter subsystem. 1916 1917 Raw counter device index value from channel Y. This attribute 1918 provides an absolute positional reference (e.g. a pulse once per 1919 revolution) which may be used to home positional systems as 1920 required. 1921 1922What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available 1923KernelVersion: 4.12 1924Contact: linux-iio@vger.kernel.org 1925Description: 1926 This interface is deprecated; please use the Counter subsystem. 1927 1928 A list of possible counting directions which are: 1929 1930 - "up" : counter device is increasing. 1931 - "down": counter device is decreasing. 1932 1933What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction 1934KernelVersion: 4.12 1935Contact: linux-iio@vger.kernel.org 1936Description: 1937 This interface is deprecated; please use the Counter subsystem. 1938 1939 Raw counter device counters direction for channel Y. 1940 1941What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_label 1942What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_label 1943KernelVersion: 5.8 1944Contact: linux-iio@vger.kernel.org 1945Description: 1946 Optional symbolic label to a device channel. 1947 If a label is defined for this channel add that to the channel 1948 specific attributes. This is useful for userspace to be able to 1949 better identify an individual channel. 1950 1951What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw 1952KernelVersion: 4.18 1953Contact: linux-iio@vger.kernel.org 1954Description: 1955 Raw (unscaled) phase difference reading from channel Y. 1956 Units after application of scale and offset are radians. 1957 1958What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input 1959What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input 1960What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input 1961What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input 1962What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm4_input 1963What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm4_input 1964What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input 1965What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input 1966KernelVersion: 4.22 1967Contact: linux-iio@vger.kernel.org 1968Description: 1969 Mass concentration reading of particulate matter in ug / m3. 1970 pmX consists of particles with aerodynamic diameter less or 1971 equal to X micrometers. 1972 1973What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_period_available 1974Date: November 2019 1975KernelVersion: 5.4 1976Contact: linux-iio@vger.kernel.org 1977Description: 1978 List of valid periods (in seconds) for which the light intensity 1979 must be above the threshold level before interrupt is asserted. 1980 1981What: /sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency 1982KernelVersion: 5.5 1983Contact: linux-iio@vger.kernel.org 1984Description: 1985 Center frequency in Hz for a notch filter. Used i.e. for line 1986 noise suppression. 1987 1988What: /sys/bus/iio/devices/iio:deviceX/in_temp_thermocouple_type 1989KernelVersion: 5.5 1990Contact: linux-iio@vger.kernel.org 1991Description: 1992 One of the following thermocouple types: B, E, J, K, N, R, S, T. 1993 1994What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient 1995What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibambient 1996KernelVersion: 5.10 1997Contact: linux-iio@vger.kernel.org 1998Description: 1999 Calibrated ambient temperature for object temperature 2000 calculation in milli degrees Celsius. 2001 2002What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw 2003What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw 2004What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw 2005KernelVersion: 5.10 2006Contact: linux-iio@vger.kernel.org 2007Description: 2008 Unscaled light intensity according to CIE 1931/DIN 5033 color space. 2009 Units after application of scale are nano nanowatts per square meter. 2010 2011What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label 2012KernelVersion: 5.12 2013Contact: linux-iio@vger.kernel.org 2014Description: 2015 Optional symbolic label for channel Y. 2016 For Intel hid hinge sensor, the label values are: 2017 hinge, keyboard, screen. It means the three channels 2018 each correspond respectively to hinge angle, keyboard angle, 2019 and screen angle. 2020 2021What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_hysteresis_relative 2022What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hysteresis_relative 2023KernelVersion: 5.12 2024Contact: linux-iio@vger.kernel.org 2025Description: 2026 Specify the percent for light sensor relative to the channel 2027 absolute value that a data field should change before an event 2028 is generated. Units are a percentage of the prior reading. 2029 2030What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable 2031Date: June 2020 2032KernelVersion: 5.8 2033Contact: linux-iio@vger.kernel.org 2034Description: 2035 Some sensors have the ability to apply auto calibration at 2036 runtime. For example, it may be necessary to compensate for 2037 contaminant build-up in a measurement chamber or optical 2038 element deterioration that would otherwise lead to sensor drift. 2039 2040 Writing 1 or 0 to this attribute will respectively activate or 2041 deactivate this auto calibration function. 2042 2043 Upon reading, the current status is returned. 2044 2045What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value 2046Date: June 2020 2047KernelVersion: 5.8 2048Contact: linux-iio@vger.kernel.org 2049Description: 2050 Some sensors have the ability to apply a manual calibration using 2051 a known measurement value, perhaps obtained from an external 2052 reference device. 2053 2054 Writing a value to this function will force such a calibration 2055 change. For the scd30 the value should be from the range 2056 [400 1 2000]. 2057 2058 Note for the scd30 that a valid value may only be obtained once 2059 it is has been written. Until then any read back of this value 2060 should be ignored. As for the scd4x an error will be returned 2061 immediately if the manual calibration has failed. 2062 2063What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value_available 2064KernelVersion: 5.15 2065Contact: linux-iio@vger.kernel.org 2066Description: 2067 Available range for the forced calibration value, expressed as: 2068 2069 - a range specified as "[min step max]" 2070 2071What: /sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency 2072What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency 2073What: /sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency 2074KernelVersion: 5.20 2075Contact: linux-iio@vger.kernel.org 2076Description: 2077 Some devices have separate controls of sampling frequency for 2078 individual channels. If multiple channels are enabled in a scan, 2079 then the sampling_frequency of the scan may be computed from the 2080 per channel sampling frequencies. 2081 2082What: /sys/.../events/in_accel_gesture_singletap_en 2083What: /sys/.../events/in_accel_gesture_doubletap_en 2084KernelVersion: 6.1 2085Contact: linux-iio@vger.kernel.org 2086Description: 2087 Device generates an event on a single or double tap. 2088 2089What: /sys/.../events/in_accel_gesture_singletap_value 2090What: /sys/.../events/in_accel_gesture_doubletap_value 2091KernelVersion: 6.1 2092Contact: linux-iio@vger.kernel.org 2093Description: 2094 Specifies the threshold value that the device is comparing 2095 against to generate the tap gesture event. The lower 2096 threshold value increases the sensitivity of tap detection. 2097 Units and the exact meaning of value are device-specific. 2098 2099What: /sys/.../events/in_accel_gesture_tap_value_available 2100KernelVersion: 6.1 2101Contact: linux-iio@vger.kernel.org 2102Description: 2103 Lists all available threshold values which can be used to 2104 modify the sensitivity of the tap detection. 2105 2106What: /sys/.../events/in_accel_gesture_singletap_reset_timeout 2107What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout 2108KernelVersion: 6.1 2109Contact: linux-iio@vger.kernel.org 2110Description: 2111 Specifies the timeout value in seconds for the tap detector 2112 to not to look for another tap event after the event as 2113 occurred. Basically the minimum quiet time between the two 2114 single-tap's or two double-tap's. 2115 2116What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available 2117KernelVersion: 6.1 2118Contact: linux-iio@vger.kernel.org 2119Description: 2120 Lists all available tap reset timeout values. Units in seconds. 2121 2122What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay 2123KernelVersion: 6.1 2124Contact: linux-iio@vger.kernel.org 2125Description: 2126 Specifies the minimum quiet time in seconds between the two 2127 taps of a double tap. 2128 2129What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available 2130KernelVersion: 6.1 2131Contact: linux-iio@vger.kernel.org 2132Description: 2133 Lists all available delay values between two taps in the double 2134 tap. Units in seconds. 2135 2136What: /sys/.../events/in_accel_gesture_tap_maxtomin_time 2137KernelVersion: 6.1 2138Contact: linux-iio@vger.kernel.org 2139Description: 2140 Specifies the maximum time difference allowed between upper 2141 and lower peak of tap to consider it as the valid tap event. 2142 Units in seconds. 2143 2144What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available 2145KernelVersion: 6.1 2146Contact: linux-iio@vger.kernel.org 2147Description: 2148 Lists all available time values between upper peak to lower 2149 peak. Units in seconds. 2150 2151What: /sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw 2152What: /sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw 2153What: /sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw 2154KernelVersion: 6.1 2155Contact: linux-iio@vger.kernel.org 2156Description: 2157 Raw (unscaled) euler angles readings. Units after 2158 application of scale are deg. 2159 2160What: /sys/bus/iio/devices/iio:deviceX/serialnumber 2161KernelVersion: 6.1 2162Contact: linux-iio@vger.kernel.org 2163Description: 2164 An example format is 16-bytes, 2-digits-per-byte, HEX-string 2165 representing the sensor unique ID number. 2166