1What: /sys/bus/iio/devices/iio:deviceX 2KernelVersion: 2.6.35 3Contact: linux-iio@vger.kernel.org 4Description: 5 Hardware chip or device accessed by one communication port. 6 Corresponds to a grouping of sensor channels. X is the IIO 7 index of the device. 8 9What: /sys/bus/iio/devices/triggerX 10KernelVersion: 2.6.35 11Contact: linux-iio@vger.kernel.org 12Description: 13 An event driven driver of data capture to an in kernel buffer. 14 May be provided by a device driver that also has an IIO device 15 based on hardware generated events (e.g. data ready) or 16 provided by a separate driver for other hardware (e.g. 17 periodic timer, GPIO or high resolution timer). 18 Contains trigger type specific elements. These do not 19 generalize well and hence are not documented in this file. 20 X is the IIO index of the trigger. 21 22What: /sys/bus/iio/devices/iio:deviceX/buffer 23KernelVersion: 2.6.35 24Contact: linux-iio@vger.kernel.org 25Description: 26 Directory of attributes relating to the buffer for the device. 27 28What: /sys/bus/iio/devices/iio:deviceX/name 29KernelVersion: 2.6.35 30Contact: linux-iio@vger.kernel.org 31Description: 32 Description of the physical chip / device for device X. 33 Typically a part number. 34 35What: /sys/bus/iio/devices/iio:deviceX/current_timestamp_clock 36KernelVersion: 4.5 37Contact: linux-iio@vger.kernel.org 38Description: 39 String identifying current posix clock used to timestamp 40 buffered samples and events for device X. 41 42What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency 43What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency 44What: /sys/bus/iio/devices/triggerX/sampling_frequency 45KernelVersion: 2.6.35 46Contact: linux-iio@vger.kernel.org 47Description: 48 Some devices have internal clocks. This parameter sets the 49 resulting sampling frequency. In many devices this 50 parameter has an effect on input filters etc. rather than 51 simply controlling when the input is sampled. As this 52 effects data ready triggers, hardware buffers and the sysfs 53 direct access interfaces, it may be found in any of the 54 relevant directories. If it effects all of the above 55 then it is to be found in the base device directory. 56 57What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available 58What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available 59What: /sys/.../iio:deviceX/buffer/sampling_frequency_available 60What: /sys/bus/iio/devices/triggerX/sampling_frequency_available 61KernelVersion: 2.6.35 62Contact: linux-iio@vger.kernel.org 63Description: 64 When the internal sampling clock can only take a small 65 discrete set of values, this file lists those available. 66 67What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio 68KernelVersion: 2.6.38 69Contact: linux-iio@vger.kernel.org 70Description: 71 Hardware dependent ADC oversampling. Controls the sampling ratio 72 of the digital filter if available. 73 74What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available 75KernelVersion: 2.6.38 76Contact: linux-iio@vger.kernel.org 77Description: 78 Hardware dependent values supported by the oversampling filter. 79 80What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw 81What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw 82What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw 83What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw 84KernelVersion: 2.6.35 85Contact: linux-iio@vger.kernel.org 86Description: 87 Raw (unscaled no bias removal etc.) voltage measurement from 88 channel Y. In special cases where the channel does not 89 correspond to externally available input one of the named 90 versions may be used. The number must always be specified and 91 unique to allow association with event codes. Units after 92 application of scale and offset are millivolts. 93 94 Channels with 'i' and 'q' modifiers always exist in pairs and both 95 channels refer to the same signal. The 'i' channel contains the in-phase 96 component of the signal while the 'q' channel contains the quadrature 97 component. 98 99What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw 100KernelVersion: 2.6.35 101Contact: linux-iio@vger.kernel.org 102Description: 103 Raw (unscaled) differential voltage measurement equivalent to 104 channel Y - channel Z where these channel numbers apply to the 105 physically equivalent inputs when non differential readings are 106 separately available. In differential only parts, then all that 107 is required is a consistent labeling. Units after application 108 of scale and offset are millivolts. 109 110What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw 111What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw 112KernelVersion: 3.17 113Contact: linux-iio@vger.kernel.org 114Description: 115 Raw (unscaled no bias removal etc.) current measurement from 116 channel Y. In special cases where the channel does not 117 correspond to externally available input one of the named 118 versions may be used. The number must always be specified and 119 unique to allow association with event codes. Units after 120 application of scale and offset are milliamps. 121 122What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw 123KernelVersion: 4.5 124Contact: linux-iio@vger.kernel.org 125Description: 126 Raw (unscaled no bias removal etc.) power measurement from 127 channel Y. The number must always be specified and 128 unique to allow association with event codes. Units after 129 application of scale and offset are milliwatts. 130 131What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw 132KernelVersion: 3.2 133Contact: linux-iio@vger.kernel.org 134Description: 135 Raw capacitance measurement from channel Y. Units after 136 application of scale and offset are nanofarads. 137 138What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw 139KernelVersion: 3.2 140Contact: linux-iio@vger.kernel.org 141Description: 142 Raw differential capacitance measurement equivalent to 143 channel Y - channel Z where these channel numbers apply to the 144 physically equivalent inputs when non differential readings are 145 separately available. In differential only parts, then all that 146 is required is a consistent labeling. Units after application 147 of scale and offset are nanofarads. 148 149What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw 150What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw 151What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw 152What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw 153What: /sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw 154What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_raw 155KernelVersion: 2.6.35 156Contact: linux-iio@vger.kernel.org 157Description: 158 Raw (unscaled no bias removal etc.) temperature measurement. 159 If an axis is specified it generally means that the temperature 160 sensor is associated with one part of a compound device (e.g. 161 a gyroscope axis). The ambient and object modifiers distinguish 162 between ambient (reference) and distant temperature for contact- 163 less measurements. Units after application of scale and offset 164 are milli degrees Celsius. 165 166What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input 167KernelVersion: 2.6.38 168Contact: linux-iio@vger.kernel.org 169Description: 170 Scaled temperature measurement in milli degrees Celsius. 171 172What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw 173What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw 174What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw 175KernelVersion: 2.6.35 176Contact: linux-iio@vger.kernel.org 177Description: 178 Acceleration in direction x, y or z (may be arbitrarily assigned 179 but should match other such assignments on device). 180 Has all of the equivalent parameters as per voltageY. Units 181 after application of scale and offset are m/s^2. 182 183What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw 184What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw 185What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw 186KernelVersion: 4.11 187Contact: linux-iio@vger.kernel.org 188Description: 189 Gravity in direction x, y or z (may be arbitrarily assigned 190 but should match other such assignments on device). 191 Units after application of scale and offset are m/s^2. 192 193What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw 194KernelVersion: 4.17 195Contact: linux-iio@vger.kernel.org 196Description: 197 Angle of rotation. Units after application of scale and offset 198 are radians. 199 200What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw 201What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw 202KernelVersion: 4.19 203Contact: linux-iio@vger.kernel.org 204Description: 205 Relative position in direction x or y on a pad (may be 206 arbitrarily assigned but should match other such assignments on 207 device). 208 Units after application of scale and offset are milli percents 209 from the pad's size in both directions. Should be calibrated by 210 the consumer. 211 212What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw 213What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw 214What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw 215KernelVersion: 2.6.35 216Contact: linux-iio@vger.kernel.org 217Description: 218 Angular velocity about axis x, y or z (may be arbitrarily 219 assigned). Has all the equivalent parameters as per voltageY. 220 Units after application of scale and offset are radians per 221 second. 222 223What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw 224What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw 225What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw 226KernelVersion: 2.6.35 227Contact: linux-iio@vger.kernel.org 228Description: 229 Inclination raw reading about axis x, y or z (may be 230 arbitrarily assigned). Data converted by application of offset 231 and scale to degrees. 232 233What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw 234What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw 235What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw 236KernelVersion: 2.6.35 237Contact: linux-iio@vger.kernel.org 238Description: 239 Magnetic field along axis x, y or z (may be arbitrarily 240 assigned). Data converted by application of offset 241 then scale to Gauss. 242 243What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw 244What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw 245What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw 246KernelVersion: 2.6.36 247Contact: linux-iio@vger.kernel.org 248Description: 249 Highest value since some reset condition. These 250 attributes allow access to this and are otherwise 251 the direct equivalent of the <type>Y[_name]_raw attributes. 252 253What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw 254KernelVersion: 2.6.36 255Contact: linux-iio@vger.kernel.org 256Description: 257 A computed peak value based on the sum squared magnitude of 258 the underlying value in the specified directions. 259 260What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw 261What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw 262KernelVersion: 3.8 263Contact: linux-iio@vger.kernel.org 264Description: 265 Raw pressure measurement from channel Y. Units after 266 application of scale and offset are kilopascal. 267 268What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input 269What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input 270KernelVersion: 3.8 271Contact: linux-iio@vger.kernel.org 272Description: 273 Scaled pressure measurement from channel Y, in kilopascal. 274 275What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw 276KernelVersion: 3.14 277Contact: linux-iio@vger.kernel.org 278Description: 279 Raw humidity measurement of air. Units after application of 280 scale and offset are milli percent. 281 282What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input 283KernelVersion: 3.14 284Contact: linux-iio@vger.kernel.org 285Description: 286 Scaled humidity measurement in milli percent. 287 288What: /sys/bus/iio/devices/iio:deviceX/in_X_mean_raw 289KernelVersion: 3.5 290Contact: linux-iio@vger.kernel.org 291Description: 292 Averaged raw measurement from channel X. The number of values 293 used for averaging is device specific. The converting rules for 294 normal raw values also applies to the averaged raw values. 295 296What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset 297What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset 298What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset 299What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset 300What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset 301What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset 302What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset 303What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset 304What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset 305What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset 306What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset 307What: /sys/bus/iio/devices/iio:deviceX/in_current_offset 308What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset 309What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset 310What: /sys/bus/iio/devices/iio:deviceX/in_current_q_offset 311What: /sys/bus/iio/devices/iio:deviceX/in_current_i_offset 312What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset 313What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset 314What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset 315What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset 316What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset 317What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset 318What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset 319What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset 320KernelVersion: 2.6.35 321Contact: linux-iio@vger.kernel.org 322Description: 323 If known for a device, offset to be added to <type>[Y]_raw prior 324 to scaling by <type>[Y]_scale in order to obtain value in the 325 <type> units as specified in <type>[Y]_raw documentation. 326 Not present if the offset is always 0 or unknown. If Y or 327 axis <x|y|z> is not present, then the offset applies to all 328 in channels of <type>. 329 May be writable if a variable offset can be applied on the 330 device. Note that this is different to calibbias which 331 is for devices (or drivers) that apply offsets to compensate 332 for variation between different instances of the part, typically 333 adjusted by using some hardware supported calibration procedure. 334 Calibbias is applied internally, offset is applied in userspace 335 to the _raw output. 336 337What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale 338What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale 339What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale 340What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale 341What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale 342What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale 343What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale 344What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale 345What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale 346What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale 347What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale 348What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale 349What: /sys/bus/iio/devices/iio:deviceX/in_current_scale 350What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale 351What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale 352What: /sys/bus/iio/devices/iio:deviceX/in_current_i_scale 353What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale 354What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale 355What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale 356What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale 357What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale 358What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale 359What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale 360What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale 361What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale 362What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale 363What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale 364What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale 365What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale 366What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale 367What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale 368What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale 369What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale 370What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale 371What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale 372What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale 373What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale 374KernelVersion: 2.6.35 375Contact: linux-iio@vger.kernel.org 376Description: 377 If known for a device, scale to be applied to <type>Y[_name]_raw 378 post addition of <type>[Y][_name]_offset in order to obtain the 379 measured value in <type> units as specified in 380 <type>[Y][_name]_raw documentation. If shared across all in 381 channels then Y and <x|y|z> are not present and the value is 382 called <type>[Y][_name]_scale. The peak modifier means this 383 value is applied to <type>Y[_name]_peak_raw values. 384 385What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias 386What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias 387What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias 388What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias 389What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias 390What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias 391What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias 392What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias 393What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias 394What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias 395KernelVersion: 2.6.35 396Contact: linux-iio@vger.kernel.org 397Description: 398 Hardware applied calibration offset (assumed to fix production 399 inaccuracies). 400 401What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale 402What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale 403What /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale 404What /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale 405What /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale 406What /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale 407What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale 408What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale 409What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale 410What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale 411What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale 412What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale 413What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale 414what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale 415what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale 416What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale 417What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale 418What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale 419KernelVersion: 2.6.35 420Contact: linux-iio@vger.kernel.org 421Description: 422 Hardware applied calibration scale factor (assumed to fix 423 production inaccuracies). If shared across all channels, 424 <type>_calibscale is used. 425 426What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender 427What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender 428What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender 429What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender 430KernelVersion: 4.0 431Contact: linux-iio@vger.kernel.org 432Description: 433 Gender of the user (e.g.: male, female) used by some pedometers 434 to compute the stride length, distance, speed and activity 435 type. 436 437What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available 438What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available 439What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available 440What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available 441KernelVersion: 4.0 442Contact: linux-iio@vger.kernel.org 443Description: 444 Lists all available gender values (e.g.: male, female). 445 446What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight 447What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight 448What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight 449What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight 450KernelVersion: 3.19 451Contact: linux-iio@vger.kernel.org 452Description: 453 Height of the user (in meters) used by some pedometers 454 to compute the stride length, distance, speed and activity 455 type. 456 457What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight 458KernelVersion: 4.0 459Contact: linux-iio@vger.kernel.org 460Description: 461 Weight of the user (in kg). It is needed by some pedometers 462 to compute the calories burnt by the user. 463 464What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available 465What: /sys/.../iio:deviceX/in_anglvel_scale_available 466What: /sys/.../iio:deviceX/in_magn_scale_available 467What: /sys/.../iio:deviceX/in_illuminance_scale_available 468What: /sys/.../iio:deviceX/in_intensity_scale_available 469What: /sys/.../iio:deviceX/in_proximity_scale_available 470What: /sys/.../iio:deviceX/in_voltageX_scale_available 471What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available 472What: /sys/.../iio:deviceX/out_voltageX_scale_available 473What: /sys/.../iio:deviceX/out_altvoltageX_scale_available 474What: /sys/.../iio:deviceX/in_capacitance_scale_available 475What: /sys/.../iio:deviceX/in_pressure_scale_available 476What: /sys/.../iio:deviceX/in_pressureY_scale_available 477KernelVersion: 2.6.35 478Contact: linux-iio@vger.kernel.org 479Description: 480 If a discrete set of scale values is available, they 481 are listed in this attribute. 482 483What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain 484What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain 485What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain 486What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain 487What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain 488KernelVersion: 2.6.35 489Contact: linux-iio@vger.kernel.org 490Description: 491 Hardware applied gain factor. If shared across all channels, 492 <type>_hardwaregain is used. 493 494What: /sys/.../in_accel_filter_low_pass_3db_frequency 495What: /sys/.../in_magn_filter_low_pass_3db_frequency 496What: /sys/.../in_anglvel_filter_low_pass_3db_frequency 497KernelVersion: 3.2 498Contact: linux-iio@vger.kernel.org 499Description: 500 If a known or controllable low pass filter is applied 501 to the underlying data channel, then this parameter 502 gives the 3dB frequency of the filter in Hz. 503 504What: /sys/.../in_accel_filter_high_pass_3db_frequency 505What: /sys/.../in_anglvel_filter_high_pass_3db_frequency 506What: /sys/.../in_magn_filter_high_pass_3db_frequency 507KernelVersion: 4.2 508Contact: linux-iio@vger.kernel.org 509Description: 510 If a known or controllable high pass filter is applied 511 to the underlying data channel, then this parameter 512 gives the 3dB frequency of the filter in Hz. 513 514What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw 515What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw 516KernelVersion: 2.6.37 517Contact: linux-iio@vger.kernel.org 518Description: 519 Raw (unscaled, no bias etc.) output voltage for 520 channel Y. The number must always be specified and 521 unique if the output corresponds to a single channel. 522 While DAC like devices typically use out_voltage, 523 a continuous frequency generating device, such as 524 a DDS or PLL should use out_altvoltage. 525 526What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw 527What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw 528KernelVersion: 2.6.37 529Contact: linux-iio@vger.kernel.org 530Description: 531 Raw (unscaled, no bias etc.) output voltage for an aggregate of 532 channel Y, channel Z, etc. This interface is available in cases 533 where a single output sets the value for multiple channels 534 simultaneously. 535 536What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode 537What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode 538What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode 539What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode 540KernelVersion: 2.6.38 541Contact: linux-iio@vger.kernel.org 542Description: 543 Specifies the output powerdown mode. 544 DAC output stage is disconnected from the amplifier and 545 1kohm_to_gnd: connected to ground via an 1kOhm resistor, 546 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, 547 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 548 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 549 90kohm_to_gnd: connected to ground via a 90kOhm resistor, 550 100kohm_to_gnd: connected to ground via an 100kOhm resistor, 551 125kohm_to_gnd: connected to ground via an 125kOhm resistor, 552 500kohm_to_gnd: connected to ground via a 500kOhm resistor, 553 640kohm_to_gnd: connected to ground via a 640kOhm resistor, 554 three_state: left floating. 555 For a list of available output power down options read 556 outX_powerdown_mode_available. If Y is not present the 557 mode is shared across all outputs. 558 559What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available 560What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available 561What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available 562What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available 563KernelVersion: 2.6.38 564Contact: linux-iio@vger.kernel.org 565Description: 566 Lists all available output power down modes. 567 If Y is not present the mode is shared across all outputs. 568 569What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown 570What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown 571What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown 572What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown 573KernelVersion: 2.6.38 574Contact: linux-iio@vger.kernel.org 575Description: 576 Writing 1 causes output Y to enter the power down mode specified 577 by the corresponding outY_powerdown_mode. DAC output stage is 578 disconnected from the amplifier. Clearing returns to normal 579 operation. Y may be suppressed if all outputs are controlled 580 together. 581 582What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency 583KernelVersion: 3.4.0 584Contact: linux-iio@vger.kernel.org 585Description: 586 Output frequency for channel Y in Hz. The number must always be 587 specified and unique if the output corresponds to a single 588 channel. 589 590What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase 591KernelVersion: 3.4.0 592Contact: linux-iio@vger.kernel.org 593Description: 594 Phase in radians of one frequency/clock output Y 595 (out_altvoltageY) relative to another frequency/clock output 596 (out_altvoltageZ) of the device X. The number must always be 597 specified and unique if the output corresponds to a single 598 channel. 599 600What: /sys/bus/iio/devices/iio:deviceX/events 601KernelVersion: 2.6.35 602Contact: linux-iio@vger.kernel.org 603Description: 604 Configuration of which hardware generated events are passed up 605 to user-space. 606 607What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en 608What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en 609What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en 610What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en 611What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en 612What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en 613What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en 614What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en 615What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en 616What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en 617What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en 618What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en 619What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en 620What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en 621What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en 622What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en 623What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en 624What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en 625What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en 626What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en 627What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en 628What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en 629What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en 630What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en 631What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en 632What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en 633What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en 634What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en 635What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en 636What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en 637What: /sys/.../iio:deviceX/events/in_voltageY_thresh_either_en 638What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en 639What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en 640KernelVersion: 2.6.37 641Contact: linux-iio@vger.kernel.org 642Description: 643 Event generated when channel passes a threshold in the specified 644 (_rising|_falling) direction. If the direction is not specified, 645 then either the device will report an event which ever direction 646 a single threshold value is passed in (e.g. 647 <type>[Y][_name]_<raw|input>_thresh_value) or 648 <type>[Y][_name]_<raw|input>_thresh_rising_value and 649 <type>[Y][_name]_<raw|input>_thresh_falling_value may take 650 different values, but the device can only enable both thresholds 651 or neither. 652 Note the driver will assume the last p events requested are 653 to be enabled where p is how many it supports (which may vary 654 depending on the exact set requested. So if you want to be 655 sure you have set what you think you have, check the contents of 656 these attributes after everything is configured. Drivers may 657 have to buffer any parameters so that they are consistent when 658 a given event type is enabled at a future point (and not those for 659 whatever event was previously enabled). 660 661What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en 662What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en 663What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en 664What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en 665What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en 666What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en 667What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en 668What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en 669What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en 670What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en 671What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en 672What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en 673What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en 674What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en 675What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en 676What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en 677What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en 678What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en 679What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en 680What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en 681What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en 682What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en 683What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en 684What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en 685What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en 686What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en 687What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en 688What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en 689What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en 690What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en 691What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en 692What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en 693KernelVersion: 2.6.37 694Contact: linux-iio@vger.kernel.org 695Description: 696 Event generated when channel passes a threshold on the rate of 697 change (1st differential) in the specified (_rising|_falling) 698 direction. If the direction is not specified, then either the 699 device will report an event which ever direction a single 700 threshold value is passed in (e.g. 701 <type>[Y][_name]_<raw|input>_roc_value) or 702 <type>[Y][_name]_<raw|input>_roc_rising_value and 703 <type>[Y][_name]_<raw|input>_roc_falling_value may take 704 different values, but the device can only enable both rate of 705 change thresholds or neither. 706 Note the driver will assume the last p events requested are 707 to be enabled where p is however many it supports (which may 708 vary depending on the exact set requested. So if you want to be 709 sure you have set what you think you have, check the contents of 710 these attributes after everything is configured. Drivers may 711 have to buffer any parameters so that they are consistent when 712 a given event type is enabled a future point (and not those for 713 whatever event was previously enabled). 714 715What: /sys/.../events/in_accel_thresh_rising_value 716What: /sys/.../events/in_accel_thresh_falling_value 717What: /sys/.../events/in_accel_x_raw_thresh_rising_value 718What: /sys/.../events/in_accel_x_raw_thresh_falling_value 719What: /sys/.../events/in_accel_y_raw_thresh_rising_value 720What: /sys/.../events/in_accel_y_raw_thresh_falling_value 721What: /sys/.../events/in_accel_z_raw_thresh_rising_value 722What: /sys/.../events/in_accel_z_raw_thresh_falling_value 723What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value 724What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value 725What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value 726What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value 727What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value 728What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value 729What: /sys/.../events/in_magn_x_raw_thresh_rising_value 730What: /sys/.../events/in_magn_x_raw_thresh_falling_value 731What: /sys/.../events/in_magn_y_raw_thresh_rising_value 732What: /sys/.../events/in_magn_y_raw_thresh_falling_value 733What: /sys/.../events/in_magn_z_raw_thresh_rising_value 734What: /sys/.../events/in_magn_z_raw_thresh_falling_value 735What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value 736What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value 737What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value 738What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value 739What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value 740What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value 741What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value 742What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value 743What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value 744What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value 745What: /sys/.../events/in_voltageY_raw_thresh_rising_value 746What: /sys/.../events/in_voltageY_raw_thresh_falling_value 747What: /sys/.../events/in_tempY_raw_thresh_rising_value 748What: /sys/.../events/in_tempY_raw_thresh_falling_value 749What: /sys/.../events/in_illuminance0_thresh_falling_value 750what: /sys/.../events/in_illuminance0_thresh_rising_value 751what: /sys/.../events/in_proximity0_thresh_falling_value 752what: /sys/.../events/in_proximity0_thresh_rising_value 753KernelVersion: 2.6.37 754Contact: linux-iio@vger.kernel.org 755Description: 756 Specifies the value of threshold that the device is comparing 757 against for the events enabled by 758 <type>Y[_name]_thresh[_rising|falling]_en. 759 If separate attributes exist for the two directions, but 760 direction is not specified for this attribute, then a single 761 threshold value applies to both directions. 762 The raw or input element of the name indicates whether the 763 value is in raw device units or in processed units (as _raw 764 and _input do on sysfs direct channel read attributes). 765 766What: /sys/.../events/in_accel_scale 767What: /sys/.../events/in_accel_peak_scale 768What: /sys/.../events/in_anglvel_scale 769What: /sys/.../events/in_magn_scale 770What: /sys/.../events/in_rot_from_north_magnetic_scale 771What: /sys/.../events/in_rot_from_north_true_scale 772What: /sys/.../events/in_voltage_scale 773What: /sys/.../events/in_voltage_supply_scale 774What: /sys/.../events/in_temp_scale 775What: /sys/.../events/in_illuminance_scale 776What: /sys/.../events/in_proximity_scale 777KernelVersion: 3.21 778Contact: linux-iio@vger.kernel.org 779Description: 780 Specifies the conversion factor from the standard units 781 to device specific units used to set the event trigger 782 threshold. 783 784What: /sys/.../events/in_accel_x_thresh_rising_hysteresis 785What: /sys/.../events/in_accel_x_thresh_falling_hysteresis 786What: /sys/.../events/in_accel_x_thresh_either_hysteresis 787What: /sys/.../events/in_accel_y_thresh_rising_hysteresis 788What: /sys/.../events/in_accel_y_thresh_falling_hysteresis 789What: /sys/.../events/in_accel_y_thresh_either_hysteresis 790What: /sys/.../events/in_accel_z_thresh_rising_hysteresis 791What: /sys/.../events/in_accel_z_thresh_falling_hysteresis 792What: /sys/.../events/in_accel_z_thresh_either_hysteresis 793What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis 794What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis 795What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis 796What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis 797What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis 798What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis 799What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis 800What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis 801What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis 802What: /sys/.../events/in_magn_x_thresh_rising_hysteresis 803What: /sys/.../events/in_magn_x_thresh_falling_hysteresis 804What: /sys/.../events/in_magn_x_thresh_either_hysteresis 805What: /sys/.../events/in_magn_y_thresh_rising_hysteresis 806What: /sys/.../events/in_magn_y_thresh_falling_hysteresis 807What: /sys/.../events/in_magn_y_thresh_either_hysteresis 808What: /sys/.../events/in_magn_z_thresh_rising_hysteresis 809What: /sys/.../events/in_magn_z_thresh_falling_hysteresis 810What: /sys/.../events/in_magn_z_thresh_either_hysteresis 811What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis 812What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis 813What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis 814What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis 815What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis 816What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis 817What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis 818What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis 819What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis 820What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis 821What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis 822What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis 823What: /sys/.../events/in_voltageY_thresh_rising_hysteresis 824What: /sys/.../events/in_voltageY_thresh_falling_hysteresis 825What: /sys/.../events/in_voltageY_thresh_either_hysteresis 826What: /sys/.../events/in_tempY_thresh_rising_hysteresis 827What: /sys/.../events/in_tempY_thresh_falling_hysteresis 828What: /sys/.../events/in_tempY_thresh_either_hysteresis 829What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis 830what: /sys/.../events/in_illuminance0_thresh_rising_hysteresis 831what: /sys/.../events/in_illuminance0_thresh_either_hysteresis 832what: /sys/.../events/in_proximity0_thresh_falling_hysteresis 833what: /sys/.../events/in_proximity0_thresh_rising_hysteresis 834what: /sys/.../events/in_proximity0_thresh_either_hysteresis 835KernelVersion: 3.13 836Contact: linux-iio@vger.kernel.org 837Description: 838 Specifies the hysteresis of threshold that the device is comparing 839 against for the events enabled by 840 <type>Y[_name]_thresh[_(rising|falling)]_hysteresis. 841 If separate attributes exist for the two directions, but 842 direction is not specified for this attribute, then a single 843 hysteresis value applies to both directions. 844 For falling events the hysteresis is added to the _value attribute for 845 this event to get the upper threshold for when the event goes back to 846 normal, for rising events the hysteresis is subtracted from the _value 847 attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 848 and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event 849 will get activated once in_voltage0_raw goes above 1200 and will become 850 deactivated again once the value falls below 1150. 851 852What: /sys/.../events/in_accel_x_raw_roc_rising_value 853What: /sys/.../events/in_accel_x_raw_roc_falling_value 854What: /sys/.../events/in_accel_y_raw_roc_rising_value 855What: /sys/.../events/in_accel_y_raw_roc_falling_value 856What: /sys/.../events/in_accel_z_raw_roc_rising_value 857What: /sys/.../events/in_accel_z_raw_roc_falling_value 858What: /sys/.../events/in_anglvel_x_raw_roc_rising_value 859What: /sys/.../events/in_anglvel_x_raw_roc_falling_value 860What: /sys/.../events/in_anglvel_y_raw_roc_rising_value 861What: /sys/.../events/in_anglvel_y_raw_roc_falling_value 862What: /sys/.../events/in_anglvel_z_raw_roc_rising_value 863What: /sys/.../events/in_anglvel_z_raw_roc_falling_value 864What: /sys/.../events/in_magn_x_raw_roc_rising_value 865What: /sys/.../events/in_magn_x_raw_roc_falling_value 866What: /sys/.../events/in_magn_y_raw_roc_rising_value 867What: /sys/.../events/in_magn_y_raw_roc_falling_value 868What: /sys/.../events/in_magn_z_raw_roc_rising_value 869What: /sys/.../events/in_magn_z_raw_roc_falling_value 870What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value 871What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value 872What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value 873What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value 874What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value 875What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value 876What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value 877What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value 878What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value 879What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value 880What: /sys/.../events/in_voltageY_raw_roc_rising_value 881What: /sys/.../events/in_voltageY_raw_roc_falling_value 882What: /sys/.../events/in_tempY_raw_roc_rising_value 883What: /sys/.../events/in_tempY_raw_roc_falling_value 884KernelVersion: 2.6.37 885Contact: linux-iio@vger.kernel.org 886Description: 887 Specifies the value of rate of change threshold that the 888 device is comparing against for the events enabled by 889 <type>[Y][_name]_roc[_rising|falling]_en. 890 If separate attributes exist for the two directions, 891 but direction is not specified for this attribute, 892 then a single threshold value applies to both directions. 893 The raw or input element of the name indicates whether the 894 value is in raw device units or in processed units (as _raw 895 and _input do on sysfs direct channel read attributes). 896 897What: /sys/.../events/in_accel_x_thresh_rising_period 898What: /sys/.../events/in_accel_x_thresh_falling_period 899What: /sys/.../events/in_accel_x_roc_rising_period 900What: /sys/.../events/in_accel_x_roc_falling_period 901What: /sys/.../events/in_accel_y_thresh_rising_period 902What: /sys/.../events/in_accel_y_thresh_falling_period 903What: /sys/.../events/in_accel_y_roc_rising_period 904What: /sys/.../events/in_accel_y_roc_falling_period 905What: /sys/.../events/in_accel_z_thresh_rising_period 906What: /sys/.../events/in_accel_z_thresh_falling_period 907What: /sys/.../events/in_accel_z_roc_rising_period 908What: /sys/.../events/in_accel_z_roc_falling_period 909What: /sys/.../events/in_anglvel_x_thresh_rising_period 910What: /sys/.../events/in_anglvel_x_thresh_falling_period 911What: /sys/.../events/in_anglvel_x_roc_rising_period 912What: /sys/.../events/in_anglvel_x_roc_falling_period 913What: /sys/.../events/in_anglvel_y_thresh_rising_period 914What: /sys/.../events/in_anglvel_y_thresh_falling_period 915What: /sys/.../events/in_anglvel_y_roc_rising_period 916What: /sys/.../events/in_anglvel_y_roc_falling_period 917What: /sys/.../events/in_anglvel_z_thresh_rising_period 918What: /sys/.../events/in_anglvel_z_thresh_falling_period 919What: /sys/.../events/in_anglvel_z_roc_rising_period 920What: /sys/.../events/in_anglvel_z_roc_falling_period 921What: /sys/.../events/in_magn_x_thresh_rising_period 922What: /sys/.../events/in_magn_x_thresh_falling_period 923What: /sys/.../events/in_magn_x_roc_rising_period 924What: /sys/.../events/in_magn_x_roc_falling_period 925What: /sys/.../events/in_magn_y_thresh_rising_period 926What: /sys/.../events/in_magn_y_thresh_falling_period 927What: /sys/.../events/in_magn_y_roc_rising_period 928What: /sys/.../events/in_magn_y_roc_falling_period 929What: /sys/.../events/in_magn_z_thresh_rising_period 930What: /sys/.../events/in_magn_z_thresh_falling_period 931What: /sys/.../events/in_magn_z_roc_rising_period 932What: /sys/.../events/in_magn_z_roc_falling_period 933What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period 934What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period 935What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period 936What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period 937What: /sys/.../events/in_rot_from_north_true_thresh_rising_period 938What: /sys/.../events/in_rot_from_north_true_thresh_falling_period 939What: /sys/.../events/in_rot_from_north_true_roc_rising_period 940What: /sys/.../events/in_rot_from_north_true_roc_falling_period 941What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period 942What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period 943What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period 944What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period 945What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period 946What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period 947What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period 948What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period 949What: /sys/.../events/in_voltageY_supply_thresh_rising_period 950What: /sys/.../events/in_voltageY_supply_thresh_falling_period 951What: /sys/.../events/in_voltageY_supply_roc_rising_period 952What: /sys/.../events/in_voltageY_supply_roc_falling_period 953What: /sys/.../events/in_voltageY_thresh_rising_period 954What: /sys/.../events/in_voltageY_thresh_falling_period 955What: /sys/.../events/in_voltageY_roc_rising_period 956What: /sys/.../events/in_voltageY_roc_falling_period 957What: /sys/.../events/in_tempY_thresh_rising_period 958What: /sys/.../events/in_tempY_thresh_falling_period 959What: /sys/.../events/in_tempY_roc_rising_period 960What: /sys/.../events/in_tempY_roc_falling_period 961What: /sys/.../events/in_accel_x&y&z_mag_falling_period 962What: /sys/.../events/in_intensity0_thresh_period 963What: /sys/.../events/in_proximity0_thresh_period 964What: /sys/.../events/in_activity_still_thresh_rising_period 965What: /sys/.../events/in_activity_still_thresh_falling_period 966What: /sys/.../events/in_activity_walking_thresh_rising_period 967What: /sys/.../events/in_activity_walking_thresh_falling_period 968What: /sys/.../events/in_activity_jogging_thresh_rising_period 969What: /sys/.../events/in_activity_jogging_thresh_falling_period 970What: /sys/.../events/in_activity_running_thresh_rising_period 971What: /sys/.../events/in_activity_running_thresh_falling_period 972KernelVersion: 2.6.37 973Contact: linux-iio@vger.kernel.org 974Description: 975 Period of time (in seconds) for which the condition must be 976 met before an event is generated. If direction is not 977 specified then this period applies to both directions. 978 979What: /sys/.../events/in_accel_thresh_rising_low_pass_filter_3db 980What: /sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db 981What: /sys/.../events/in_magn_thresh_rising_low_pass_filter_3db 982KernelVersion: 4.2 983Contact: linux-iio@vger.kernel.org 984Description: 985 If a low pass filter can be applied to the event generation 986 this property gives its 3db frequency in Hz. 987 A value of zero disables the filter. 988 989What: /sys/.../events/in_accel_thresh_rising_high_pass_filter_3db 990What: /sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db 991What: /sys/.../events/in_magn_thresh_rising_high_pass_filter_3db 992KernelVersion: 4.2 993Contact: linux-iio@vger.kernel.org 994Description: 995 If a high pass filter can be applied to the event generation 996 this property gives its 3db frequency in Hz. 997 A value of zero disables the filter. 998 999What: /sys/.../events/in_activity_still_thresh_rising_en 1000What: /sys/.../events/in_activity_still_thresh_falling_en 1001What: /sys/.../events/in_activity_walking_thresh_rising_en 1002What: /sys/.../events/in_activity_walking_thresh_falling_en 1003What: /sys/.../events/in_activity_jogging_thresh_rising_en 1004What: /sys/.../events/in_activity_jogging_thresh_falling_en 1005What: /sys/.../events/in_activity_running_thresh_rising_en 1006What: /sys/.../events/in_activity_running_thresh_falling_en 1007KernelVersion: 3.19 1008Contact: linux-iio@vger.kernel.org 1009Description: 1010 Enables or disables activitity events. Depending on direction 1011 an event is generated when sensor ENTERS or LEAVES a given state. 1012 1013What: /sys/.../events/in_activity_still_thresh_rising_value 1014What: /sys/.../events/in_activity_still_thresh_falling_value 1015What: /sys/.../events/in_activity_walking_thresh_rising_value 1016What: /sys/.../events/in_activity_walking_thresh_falling_value 1017What: /sys/.../events/in_activity_jogging_thresh_rising_value 1018What: /sys/.../events/in_activity_jogging_thresh_falling_value 1019What: /sys/.../events/in_activity_running_thresh_rising_value 1020What: /sys/.../events/in_activity_running_thresh_falling_value 1021KernelVersion: 3.19 1022Contact: linux-iio@vger.kernel.org 1023Description: 1024 Confidence value (in units as percentage) to be used 1025 for deciding when an event should be generated. E.g for 1026 running: If the confidence value reported by the sensor 1027 is greater than in_activity_running_thresh_rising_value 1028 then the sensor ENTERS running state. Conversely, if the 1029 confidence value reported by the sensor is lower than 1030 in_activity_running_thresh_falling_value then the sensor 1031 is LEAVING running state. 1032 1033What: /sys/.../iio:deviceX/events/in_accel_mag_en 1034What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en 1035What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en 1036What: /sys/.../iio:deviceX/events/in_accel_x_mag_en 1037What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en 1038What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en 1039What: /sys/.../iio:deviceX/events/in_accel_y_mag_en 1040What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en 1041What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en 1042What: /sys/.../iio:deviceX/events/in_accel_z_mag_en 1043What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en 1044What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en 1045What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en 1046What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en 1047KernelVersion: 2.6.37 1048Contact: linux-iio@vger.kernel.org 1049Description: 1050 Similar to in_accel_x_thresh[_rising|_falling]_en, but here the 1051 magnitude of the channel is compared to the threshold, not its 1052 signed value. 1053 1054What: /sys/.../events/in_accel_raw_mag_value 1055What: /sys/.../events/in_accel_x_raw_mag_rising_value 1056What: /sys/.../events/in_accel_y_raw_mag_rising_value 1057What: /sys/.../events/in_accel_z_raw_mag_rising_value 1058KernelVersion: 2.6.37 1059Contact: linux-iio@vger.kernel.org 1060Description: 1061 The value to which the magnitude of the channel is compared. If 1062 number or direction is not specified, applies to all channels of 1063 this type. 1064 1065What: /sys/.../events/in_steps_change_en 1066KernelVersion: 4.0 1067Contact: linux-iio@vger.kernel.org 1068Description: 1069 Event generated when channel passes a threshold on the absolute 1070 change in value. E.g. for steps: a step change event is 1071 generated each time the user takes N steps, where N is set using 1072 in_steps_change_value. 1073 1074What: /sys/.../events/in_steps_change_value 1075KernelVersion: 4.0 1076Contact: linux-iio@vger.kernel.org 1077Description: 1078 Specifies the value of change threshold that the 1079 device is comparing against for the events enabled by 1080 <type>[Y][_name]_roc[_rising|falling|]_en. E.g. for steps: 1081 if set to 3, a step change event will be generated every 3 1082 steps. 1083 1084What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger 1085KernelVersion: 2.6.35 1086Contact: linux-iio@vger.kernel.org 1087Description: 1088 The name of the trigger source being used, as per string given 1089 in /sys/class/iio/triggerY/name. 1090 1091What: /sys/bus/iio/devices/iio:deviceX/buffer/length 1092KernelVersion: 2.6.35 1093Contact: linux-iio@vger.kernel.org 1094Description: 1095 Number of scans contained by the buffer. 1096 1097What: /sys/bus/iio/devices/iio:deviceX/buffer/enable 1098KernelVersion: 2.6.35 1099Contact: linux-iio@vger.kernel.org 1100Description: 1101 Actually start the buffer capture up. Will start trigger 1102 if first device and appropriate. 1103 1104What: /sys/bus/iio/devices/iio:deviceX/scan_elements 1105KernelVersion: 2.6.37 1106Contact: linux-iio@vger.kernel.org 1107Description: 1108 Directory containing interfaces for elements that will be 1109 captured for a single triggered sample set in the buffer. 1110 1111What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en 1112What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en 1113What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en 1114What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_en 1115What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_en 1116What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en 1117What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en 1118What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en 1119What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en 1120What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en 1121What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en 1122What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en 1123What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en 1124What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en 1125What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en 1126What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en 1127What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en 1128What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en 1129What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en 1130What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en 1131What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en 1132What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en 1133What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en 1134What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en 1135What: /sys/.../iio:deviceX/scan_elements/in_pressure_en 1136What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en 1137What: /sys/.../iio:deviceX/scan_elements/in_proximity_en 1138KernelVersion: 2.6.37 1139Contact: linux-iio@vger.kernel.org 1140Description: 1141 Scan element control for triggered data capture. 1142 1143What: /sys/.../iio:deviceX/scan_elements/in_accel_type 1144What: /sys/.../iio:deviceX/scan_elements/in_anglvel_type 1145What: /sys/.../iio:deviceX/scan_elements/in_magn_type 1146What: /sys/.../iio:deviceX/scan_elements/in_incli_type 1147What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type 1148What: /sys/.../iio:deviceX/scan_elements/in_voltage_type 1149What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type 1150What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type 1151What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type 1152What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type 1153What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type 1154What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type 1155What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type 1156What: /sys/.../iio:deviceX/scan_elements/in_pressure_type 1157What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type 1158What: /sys/.../iio:deviceX/scan_elements/in_proximity_type 1159KernelVersion: 2.6.37 1160Contact: linux-iio@vger.kernel.org 1161Description: 1162 Description of the scan element data storage within the buffer 1163 and hence the form in which it is read from user-space. 1164 Form is [be|le]:[s|u]bits/storagebits[>>shift]. 1165 be or le specifies big or little endian. s or u specifies if 1166 signed (2's complement) or unsigned. bits is the number of bits 1167 of data and storagebits is the space (after padding) that it 1168 occupies in the buffer. shift if specified, is the shift that 1169 needs to be applied prior to masking out unused bits. Some 1170 devices put their data in the middle of the transferred elements 1171 with additional information on both sides. Note that some 1172 devices will have additional information in the unused bits 1173 so to get a clean value, the bits value must be used to mask 1174 the buffer output value appropriately. The storagebits value 1175 also specifies the data alignment. So s48/64>>2 will be a 1176 signed 48 bit integer stored in a 64 bit location aligned to 1177 a 64 bit boundary. To obtain the clean value, shift right 2 1178 and apply a mask to zero the top 16 bits of the result. 1179 For other storage combinations this attribute will be extended 1180 appropriately. 1181 1182What: /sys/.../iio:deviceX/scan_elements/in_accel_type_available 1183KernelVersion: 2.6.37 1184Contact: linux-iio@vger.kernel.org 1185Description: 1186 If the type parameter can take one of a small set of values, 1187 this attribute lists them. 1188 1189What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index 1190What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index 1191What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index 1192What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index 1193What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index 1194What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index 1195What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index 1196What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index 1197What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index 1198What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_index 1199What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_index 1200What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index 1201What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index 1202What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index 1203What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index 1204What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index 1205What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index 1206What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index 1207What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index 1208What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index 1209What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index 1210What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index 1211What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index 1212What: /sys/.../iio:deviceX/scan_elements/in_pressure_index 1213What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index 1214What: /sys/.../iio:deviceX/scan_elements/in_proximity_index 1215KernelVersion: 2.6.37 1216Contact: linux-iio@vger.kernel.org 1217Description: 1218 A single positive integer specifying the position of this 1219 scan element in the buffer. Note these are not dependent on 1220 what is enabled and may not be contiguous. Thus for user-space 1221 to establish the full layout these must be used in conjunction 1222 with all _en attributes to establish which channels are present, 1223 and the relevant _type attributes to establish the data storage 1224 format. 1225 1226What: /sys/.../iio:deviceX/in_activity_still_input 1227What: /sys/.../iio:deviceX/in_activity_walking_input 1228What: /sys/.../iio:deviceX/in_activity_jogging_input 1229What: /sys/.../iio:deviceX/in_activity_running_input 1230KernelVersion: 3.19 1231Contact: linux-iio@vger.kernel.org 1232Description: 1233 This attribute is used to read the confidence for an activity 1234 expressed in units as percentage. 1235 1236What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw 1237KernelVersion: 2.6.38 1238Contact: linux-iio@vger.kernel.org 1239Description: 1240 This attribute is used to read the amount of quadrature error 1241 present in the device at a given time. 1242 1243What: /sys/.../iio:deviceX/in_accelX_power_mode 1244KernelVersion: 3.11 1245Contact: linux-iio@vger.kernel.org 1246Description: 1247 Specifies the chip power mode. 1248 low_noise: reduce noise level from ADC, 1249 low_power: enable low current consumption. 1250 For a list of available output power modes read 1251 in_accel_power_mode_available. 1252 1253What: /sys/.../iio:deviceX/in_energy_input 1254What: /sys/.../iio:deviceX/in_energy_raw 1255KernelVersion: 4.0 1256Contact: linux-iio@vger.kernel.org 1257Description: 1258 This attribute is used to read the energy value reported by the 1259 device (e.g.: human activity sensors report energy burnt by the 1260 user). Units after application of scale are Joules. 1261 1262What: /sys/.../iio:deviceX/in_distance_input 1263What: /sys/.../iio:deviceX/in_distance_raw 1264KernelVersion: 4.0 1265Contact: linux-iio@vger.kernel.org 1266Description: 1267 This attribute is used to read the measured distance to an object 1268 or the distance covered by the user since the last reboot while 1269 activated. Units after application of scale are meters. 1270 1271What: /sys/bus/iio/devices/iio:deviceX/store_eeprom 1272KernelVersion: 3.4.0 1273Contact: linux-iio@vger.kernel.org 1274Description: 1275 Writing '1' stores the current device configuration into 1276 on-chip EEPROM. After power-up or chip reset the device will 1277 automatically load the saved configuration. 1278 1279What: /sys/.../iio:deviceX/in_proximity_raw 1280What: /sys/.../iio:deviceX/in_proximity_input 1281What: /sys/.../iio:deviceX/in_proximityY_raw 1282KernelVersion: 3.4 1283Contact: linux-iio@vger.kernel.org 1284Description: 1285 Proximity measurement indicating that some 1286 object is near the sensor, usually by observing 1287 reflectivity of infrared or ultrasound emitted. 1288 Often these sensors are unit less and as such conversion 1289 to SI units is not possible. Higher proximity measurements 1290 indicate closer objects, and vice versa. Units after 1291 application of scale and offset are meters. 1292 1293What: /sys/.../iio:deviceX/in_illuminance_input 1294What: /sys/.../iio:deviceX/in_illuminance_raw 1295What: /sys/.../iio:deviceX/in_illuminanceY_input 1296What: /sys/.../iio:deviceX/in_illuminanceY_raw 1297What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw 1298What: /sys/.../iio:deviceX/in_illuminance_ir_raw 1299What: /sys/.../iio:deviceX/in_illuminance_clear_raw 1300KernelVersion: 3.4 1301Contact: linux-iio@vger.kernel.org 1302Description: 1303 Illuminance measurement, units after application of scale 1304 and offset are lux. 1305 1306What: /sys/.../iio:deviceX/in_intensityY_raw 1307What: /sys/.../iio:deviceX/in_intensityY_ir_raw 1308What: /sys/.../iio:deviceX/in_intensityY_both_raw 1309What: /sys/.../iio:deviceX/in_intensityY_uv_raw 1310What: /sys/.../iio:deviceX/in_intensityY_duv_raw 1311KernelVersion: 3.4 1312Contact: linux-iio@vger.kernel.org 1313Description: 1314 Unit-less light intensity. Modifiers both and ir indicate 1315 that measurements contain visible and infrared light 1316 components or just infrared light, respectively. Modifier 1317 uv indicates that measurements contain ultraviolet light 1318 components. Modifier duv indicates that measurements 1319 contain deep ultraviolet light components. 1320 1321What: /sys/.../iio:deviceX/in_uvindex_input 1322KernelVersion: 4.6 1323Contact: linux-iio@vger.kernel.org 1324Description: 1325 UV light intensity index measuring the human skin's response to 1326 different wavelength of sunlight weighted according to the 1327 standardised CIE Erythemal Action Spectrum. UV index values range 1328 from 0 (low) to >=11 (extreme). 1329 1330What: /sys/.../iio:deviceX/in_intensity_red_integration_time 1331What: /sys/.../iio:deviceX/in_intensity_green_integration_time 1332What: /sys/.../iio:deviceX/in_intensity_blue_integration_time 1333What: /sys/.../iio:deviceX/in_intensity_clear_integration_time 1334What: /sys/.../iio:deviceX/in_illuminance_integration_time 1335KernelVersion: 3.12 1336Contact: linux-iio@vger.kernel.org 1337Description: 1338 This attribute is used to get/set the integration time in 1339 seconds. 1340 1341What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time 1342KernelVersion: 4.0 1343Contact: linux-iio@vger.kernel.org 1344Description: 1345 Number of seconds in which to compute speed. 1346 1347What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw 1348KernelVersion: 3.15 1349Contact: linux-iio@vger.kernel.org 1350Description: 1351 Raw value of quaternion components using a format 1352 x y z w. Here x, y, and z component represents the axis about 1353 which a rotation will occur and w component represents the 1354 amount of rotation. 1355 1356What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw 1357What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw 1358What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw 1359What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw 1360KernelVersion: 3.15 1361Contact: linux-iio@vger.kernel.org 1362Description: 1363 Raw value of rotation from true/magnetic north measured with 1364 or without compensation from tilt sensors. 1365 1366What: /sys/bus/iio/devices/iio:deviceX/in_currentX_raw 1367What: /sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw 1368What: /sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw 1369KernelVersion: 3.18 1370Contact: linux-iio@vger.kernel.org 1371Description: 1372 Raw current measurement from channel X. Units are in milliamps 1373 after application of scale and offset. If no offset or scale is 1374 present, output should be considered as processed with the 1375 unit in milliamps. 1376 1377 Channels with 'i' and 'q' modifiers always exist in pairs and both 1378 channels refer to the same signal. The 'i' channel contains the in-phase 1379 component of the signal while the 'q' channel contains the quadrature 1380 component. 1381 1382What: /sys/.../iio:deviceX/in_energy_en 1383What: /sys/.../iio:deviceX/in_distance_en 1384What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en 1385What: /sys/.../iio:deviceX/in_steps_en 1386KernelVersion: 3.19 1387Contact: linux-iio@vger.kernel.org 1388Description: 1389 Activates a device feature that runs in firmware/hardware. 1390 E.g. for steps: the pedometer saves power while not used; 1391 when activated, it will count the steps taken by the user in 1392 firmware and export them through in_steps_input. 1393 1394What: /sys/.../iio:deviceX/in_steps_input 1395KernelVersion: 3.19 1396Contact: linux-iio@vger.kernel.org 1397Description: 1398 This attribute is used to read the number of steps taken by the user 1399 since the last reboot while activated. 1400 1401What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input 1402What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw 1403KernelVersion: 3.19 1404Contact: linux-iio@vger.kernel.org 1405Description: 1406 This attribute is used to read the current speed value of the 1407 user (which is the norm or magnitude of the velocity vector). 1408 Units after application of scale are m/s. 1409 1410What: /sys/.../iio:deviceX/in_steps_debounce_count 1411KernelVersion: 4.0 1412Contact: linux-iio@vger.kernel.org 1413Description: 1414 Specifies the number of steps that must occur within 1415 in_steps_filter_debounce_time for the pedometer to decide the 1416 consumer is making steps. 1417 1418What: /sys/.../iio:deviceX/in_steps_debounce_time 1419KernelVersion: 4.0 1420Contact: linux-iio@vger.kernel.org 1421Description: 1422 Specifies number of seconds in which we compute the steps 1423 that occur in order to decide if the consumer is making steps. 1424 1425What: /sys/bus/iio/devices/iio:deviceX/buffer/watermark 1426KernelVersion: 4.2 1427Contact: linux-iio@vger.kernel.org 1428Description: 1429 A single positive integer specifying the maximum number of scan 1430 elements to wait for. 1431 Poll will block until the watermark is reached. 1432 Blocking read will wait until the minimum between the requested 1433 read amount or the low water mark is available. 1434 Non-blocking read will retrieve the available samples from the 1435 buffer even if there are less samples then watermark level. This 1436 allows the application to block on poll with a timeout and read 1437 the available samples after the timeout expires and thus have a 1438 maximum delay guarantee. 1439 1440What: /sys/bus/iio/devices/iio:deviceX/buffer/data_available 1441KernelVersion: 4.16 1442Contact: linux-iio@vger.kernel.org 1443Description: 1444 A read-only value indicating the bytes of data available in the 1445 buffer. In the case of an output buffer, this indicates the 1446 amount of empty space available to write data to. In the case of 1447 an input buffer, this indicates the amount of data available for 1448 reading. 1449 1450What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled 1451KernelVersion: 4.2 1452Contact: linux-iio@vger.kernel.org 1453Description: 1454 A read-only boolean value that indicates if the hardware fifo is 1455 currently enabled or disabled. If the device does not have a 1456 hardware fifo this entry is not present. 1457 The hardware fifo is enabled when the buffer is enabled if the 1458 current hardware fifo watermark level is set and other current 1459 device settings allows it (e.g. if a trigger is set that samples 1460 data differently that the hardware fifo does then hardware fifo 1461 will not enabled). 1462 If the hardware fifo is enabled and the level of the hardware 1463 fifo reaches the hardware fifo watermark level the device will 1464 flush its hardware fifo to the device buffer. Doing a non 1465 blocking read on the device when no samples are present in the 1466 device buffer will also force a flush. 1467 When the hardware fifo is enabled there is no need to use a 1468 trigger to use buffer mode since the watermark settings 1469 guarantees that the hardware fifo is flushed to the device 1470 buffer. 1471 1472What: /sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout 1473KernelVersion: 4.12 1474Contact: linux-iio@vger.kernel.org 1475Description: 1476 A read/write property to provide capability to delay reporting of 1477 samples till a timeout is reached. This allows host processors to 1478 sleep, while the sensor is storing samples in its internal fifo. 1479 The maximum timeout in seconds can be specified by setting 1480 hwfifo_timeout.The current delay can be read by reading 1481 hwfifo_timeout. A value of 0 means that there is no timeout. 1482 1483What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark 1484KernelVersion: 4.2 1485Contact: linux-iio@vger.kernel.org 1486Description: 1487 Read-only entry that contains a single integer specifying the 1488 current watermark level for the hardware fifo. If the device 1489 does not have a hardware fifo this entry is not present. 1490 The watermark level for the hardware fifo is set by the driver 1491 based on the value set by the user in buffer/watermark but 1492 taking into account hardware limitations (e.g. most hardware 1493 buffers are limited to 32-64 samples, some hardware buffers 1494 watermarks are fixed or have minimum levels). A value of 0 1495 means that the hardware watermark is unset. 1496 1497What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_min 1498KernelVersion: 4.2 1499Contact: linux-iio@vger.kernel.org 1500Description: 1501 A single positive integer specifying the minimum watermark level 1502 for the hardware fifo of this device. If the device does not 1503 have a hardware fifo this entry is not present. 1504 If the user sets buffer/watermark to a value less than this one, 1505 then the hardware watermark will remain unset. 1506 1507What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_max 1508KernelVersion: 4.2 1509Contact: linux-iio@vger.kernel.org 1510Description: 1511 A single positive integer specifying the maximum watermark level 1512 for the hardware fifo of this device. If the device does not 1513 have a hardware fifo this entry is not present. 1514 If the user sets buffer/watermark to a value greater than this 1515 one, then the hardware watermark will be capped at this value. 1516 1517What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_available 1518KernelVersion: 4.2 1519Contact: linux-iio@vger.kernel.org 1520Description: 1521 A list of positive integers specifying the available watermark 1522 levels for the hardware fifo. This entry is optional and if it 1523 is not present it means that all the values between 1524 hwfifo_watermark_min and hwfifo_watermark_max are supported. 1525 If the user sets buffer/watermark to a value greater than 1526 hwfifo_watermak_min but not equal to any of the values in this 1527 list, the driver will chose an appropriate value for the 1528 hardware fifo watermark level. 1529 1530What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity 1531What: /sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity 1532What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity 1533What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity 1534KernelVersion: 4.1 1535Contact: linux-iio@vger.kernel.org 1536Description: 1537 The emissivity ratio of the surface in the field of view of the 1538 contactless temperature sensor. Emissivity varies from 0 to 1, 1539 with 1 being the emissivity of a black body. 1540 1541What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio 1542What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio 1543What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio 1544KernelVersion: 4.2 1545Contact: linux-iio@vger.kernel.org 1546Description: 1547 Hardware applied number of measurements for acquiring one 1548 data point. The HW will do <type>[_name]_oversampling_ratio 1549 measurements and return the average value as output data. Each 1550 value resulted from <type>[_name]_oversampling_ratio measurements 1551 is considered as one sample for <type>[_name]_sampling_frequency. 1552 1553What: /sys/bus/iio/devices/iio:deviceX/in_concentration_raw 1554What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_raw 1555What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw 1556What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_co2_raw 1557What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw 1558What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw 1559What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw 1560What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw 1561What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw 1562What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw 1563KernelVersion: 4.3 1564Contact: linux-iio@vger.kernel.org 1565Description: 1566 Raw (unscaled no offset etc.) percentage reading of a substance. 1567 1568What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw 1569What: /sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw 1570What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw 1571What: /sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw 1572KernelVersion: 4.3 1573Contact: linux-iio@vger.kernel.org 1574Description: 1575 Raw (unscaled no offset etc.) resistance reading that can be processed 1576 into an ohm value. 1577 1578What: /sys/bus/iio/devices/iio:deviceX/heater_enable 1579KernelVersion: 4.1.0 1580Contact: linux-iio@vger.kernel.org 1581Description: 1582 '1' (enable) or '0' (disable) specifying the enable 1583 of heater function. Same reading values apply 1584 This ABI is especially applicable for humidity sensors 1585 to heatup the device and get rid of any condensation 1586 in some humidity environment 1587 1588What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw 1589KernelVersion: 4.5 1590Contact: linux-iio@vger.kernel.org 1591Description: 1592 Raw (unscaled no offset etc.) pH reading of a substance as a negative 1593 base-10 logarithm of hydrodium ions in a litre of water. 1594 1595What: /sys/bus/iio/devices/iio:deviceX/mount_matrix 1596What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix 1597What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix 1598What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix 1599What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix 1600KernelVersion: 4.6 1601Contact: linux-iio@vger.kernel.org 1602Description: 1603 Mounting matrix for IIO sensors. This is a rotation matrix which 1604 informs userspace about sensor chip's placement relative to the 1605 main hardware it is mounted on. 1606 Main hardware placement is defined according to the local 1607 reference frame related to the physical quantity the sensor 1608 measures. 1609 Given that the rotation matrix is defined in a board specific 1610 way (platform data and / or device-tree), the main hardware 1611 reference frame definition is left to the implementor's choice 1612 (see below for a magnetometer example). 1613 Applications should apply this rotation matrix to samples so 1614 that when main hardware reference frame is aligned onto local 1615 reference frame, then sensor chip reference frame is also 1616 perfectly aligned with it. 1617 Matrix is a 3x3 unitary matrix and typically looks like 1618 [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix 1619 [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware 1620 are perfectly aligned with each other. 1621 1622 For example, a mounting matrix for a magnetometer sensor informs 1623 userspace about sensor chip's ORIENTATION relative to the main 1624 hardware. 1625 More specifically, main hardware orientation is defined with 1626 respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : 1627 * Y is in the ground plane and positive towards magnetic North ; 1628 * X is in the ground plane, perpendicular to the North axis and 1629 positive towards the East ; 1630 * Z is perpendicular to the ground plane and positive upwards. 1631 1632 An implementor might consider that for a hand-held device, a 1633 'natural' orientation would be 'front facing camera at the top'. 1634 The main hardware reference frame could then be described as : 1635 * Y is in the plane of the screen and is positive towards the 1636 top of the screen ; 1637 * X is in the plane of the screen, perpendicular to Y axis, and 1638 positive towards the right hand side of the screen ; 1639 * Z is perpendicular to the screen plane and positive out of the 1640 screen. 1641 Another example for a quadrotor UAV might be : 1642 * Y is in the plane of the propellers and positive towards the 1643 front-view camera; 1644 * X is in the plane of the propellers, perpendicular to Y axis, 1645 and positive towards the starboard side of the UAV ; 1646 * Z is perpendicular to propellers plane and positive upwards. 1647 1648What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw 1649KernelVersion: 4.8 1650Contact: linux-iio@vger.kernel.org 1651Description: 1652 Raw (unscaled no offset etc.) electric conductivity reading that 1653 can be processed to siemens per meter. 1654 1655What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw 1656KernelVersion: 4.10 1657Contact: linux-iio@vger.kernel.org 1658Description: 1659 This interface is deprecated; please use the Counter subsystem. 1660 1661 Raw counter device counts from channel Y. For quadrature 1662 counters, multiplication by an available [Y]_scale results in 1663 the counts of a single quadrature signal phase from channel Y. 1664 1665What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw 1666KernelVersion: 4.10 1667Contact: linux-iio@vger.kernel.org 1668Description: 1669 This interface is deprecated; please use the Counter subsystem. 1670 1671 Raw counter device index value from channel Y. This attribute 1672 provides an absolute positional reference (e.g. a pulse once per 1673 revolution) which may be used to home positional systems as 1674 required. 1675 1676What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available 1677KernelVersion: 4.12 1678Contact: linux-iio@vger.kernel.org 1679Description: 1680 This interface is deprecated; please use the Counter subsystem. 1681 1682 A list of possible counting directions which are: 1683 - "up" : counter device is increasing. 1684 - "down": counter device is decreasing. 1685 1686What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction 1687KernelVersion: 4.12 1688Contact: linux-iio@vger.kernel.org 1689Description: 1690 This interface is deprecated; please use the Counter subsystem. 1691 1692 Raw counter device counters direction for channel Y. 1693 1694What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw 1695KernelVersion: 4.18 1696Contact: linux-iio@vger.kernel.org 1697Description: 1698 Raw (unscaled) phase difference reading from channel Y 1699 that can be processed to radians. 1700 1701What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input 1702What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input 1703What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input 1704What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input 1705What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm4_input 1706What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm4_input 1707What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input 1708What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input 1709KernelVersion: 4.22 1710Contact: linux-iio@vger.kernel.org 1711Description: 1712 Mass concentration reading of particulate matter in ug / m3. 1713 pmX consists of particles with aerodynamic diameter less or 1714 equal to X micrometers. 1715