1aa8cb048SGuido GüntherWhat: /sys/bus/iio/devices/iio:deviceX/in_proximity_nearlevel 2aa8cb048SGuido GüntherDate: March 2020 3aa8cb048SGuido GüntherKernelVersion: 5.7 4aa8cb048SGuido GüntherContact: linux-iio@vger.kernel.org 5aa8cb048SGuido GüntherDescription: 6aa8cb048SGuido Günther Near level for proximity sensors. This is a single integer 7aa8cb048SGuido Günther value that tells user space when an object should be 8aa8cb048SGuido Günther considered close to the device. If the value read from the 9aa8cb048SGuido Günther sensor is above or equal to the value in this file an object 10aa8cb048SGuido Günther should typically be considered near. 11*2a94469fSJonathan Cameron 12*2a94469fSJonathan CameronWhat: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity 13*2a94469fSJonathan CameronDate: March 2014 14*2a94469fSJonathan CameronKernelVersion: 3.15 15*2a94469fSJonathan CameronContact: linux-iio@vger.kernel.org 16*2a94469fSJonathan CameronDescription: 17*2a94469fSJonathan Cameron Proximity sensors sometimes have a controllable amplifier 18*2a94469fSJonathan Cameron on the signal from which time of flight measurements are 19*2a94469fSJonathan Cameron taken. 20*2a94469fSJonathan Cameron The appropriate values to take is dependent on both the 21*2a94469fSJonathan Cameron sensor and it's operating environment: 22*2a94469fSJonathan Cameron * as3935 (0-31 range) 23*2a94469fSJonathan Cameron 18 = indoors (default) 24*2a94469fSJonathan Cameron 14 = outdoors 25