1What:		/sys/bus/fcoe/
2Date:		August 2012
3KernelVersion:	TBD
4Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
5Description:	The FCoE bus. Attributes in this directory are control interfaces.
6Attributes:
7
8	ctlr_create: 'FCoE Controller' instance creation interface. Writing an
9		     <ifname> to this file will allocate and populate sysfs with a
10		     fcoe_ctlr_device (ctlr_X). The user can then configure any
11		     per-port settings and finally write to the fcoe_ctlr_device's
12		     'start' attribute to begin the kernel's discovery and login
13		     process.
14
15	ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
16		       fcoe_ctlr_device's sysfs name to this file will log the
17		       fcoe_ctlr_device out of the fabric or otherwise connected
18		       FCoE devices. It will also free all kernel memory allocated
19		       for this fcoe_ctlr_device and any structures associated
20		       with it, this includes the scsi_host.
21
22What:		/sys/bus/fcoe/devices/ctlr_X
23Date:		March 2012
24KernelVersion:	TBD
25Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
26Description:	'FCoE Controller' instances on the fcoe bus.
27		The FCoE Controller now has a three stage creation process.
28		1) Write interface name to ctlr_create 2) Configure the FCoE
29		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
30		discovery and login. The FCoE Controller is destroyed by
31		writing it's name, i.e. ctlr_X to the ctlr_delete file.
32
33Attributes:
34
35	fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
36			  this value will change the dev_loss_tmo for all
37			  FCFs discovered by this controller.
38
39	mode:		  Display or change the FCoE Controller's mode. Possible
40			  modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
41			  is started in 'Fabric' mode then FIP FCF discovery is
42			  initiated and ultimately a fabric login is attempted.
43			  If a FCoE Controller is started in 'VN2VN' mode then
44			  FIP VN2VN discovery and login is performed. A FCoE
45			  Controller only supports one mode at a time.
46
47	enabled:	  Whether an FCoE controller is enabled or disabled.
48			  0 if disabled, 1 if enabled. Writing either 0 or 1
49			  to this file will enable or disable the FCoE controller.
50
51	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
52
53	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
54			  failure count.
55
56	lesb/miss_fka:    Link Error Status Block (LESB) missed FCoE
57			  Initialization Protocol (FIP) Keep-Alives (FKA).
58
59	lesb/symb_err:    Link Error Status Block (LESB) symbolic error count.
60
61	lesb/err_block:   Link Error Status Block (LESB) block error count.
62
63	lesb/fcs_error:   Link Error Status Block (LESB) Fibre Channel
64			  Serivces error count.
65
66Notes: ctlr_X (global increment starting at 0)
67
68What:		/sys/bus/fcoe/devices/fcf_X
69Date:		March 2012
70KernelVersion:	TBD
71Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
72Description:	'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
73		Forwarder, which is a FCoE switch that can accept FCoE
74		(Ethernet) packets, unpack them, and forward the embedded
75		Fibre Channel frames into a FC fabric. It can also take
76		outbound FC frames and pack them in Ethernet packets to
77		be sent to their destination on the Ethernet segment.
78Attributes:
79
80	fabric_name: Identifies the fabric that the FCF services.
81
82	switch_name: Identifies the FCF.
83
84	priority:    The switch's priority amongst other FCFs on the same
85		     fabric.
86
87	selected:    1 indicates that the switch has been selected for use;
88		     0 indicates that the swich will not be used.
89
90	fc_map:      The Fibre Channel MAP
91
92	vfid:	     The Virtual Fabric ID
93
94	mac:         The FCF's MAC address
95
96	fka_peroid:  The FIP Keep-Alive peroid
97
98	fabric_state: The internal kernel state
99		      "Unknown" - Initialization value
100		      "Disconnected" - No link to the FCF/fabric
101		      "Connected" - Host is connected to the FCF
102		      "Deleted" - FCF is being removed from the system
103
104	dev_loss_tmo: The device loss timeout peroid for this FCF.
105
106Notes: A device loss infrastructre similar to the FC Transport's
107       is present in fcoe_sysfs. It is nice to have so that a
108       link flapping adapter doesn't continually advance the count
109       used to identify the discovered FCF. FCFs will exist in a
110       "Disconnected" state until either the timer expires and the
111       FCF becomes "Deleted" or the FCF is rediscovered and becomes
112       "Connected."
113
114
115Users: The first user of this interface will be the fcoeadm application,
116       which is commonly packaged in the fcoe-utils package.
117