xref: /openbmc/linux/Documentation/ABI/testing/dev-kmsg (revision 8ece3b3e)

What:		/dev/kmsg
Date:		Mai 2012
KernelVersion:	3.5
Contact:	Kay Sievers <kay@vrfy.org>
Description:	The /dev/kmsg character device node provides userspace access
		to the kernel's printk buffer.

		Injecting messages:
		Every write() to the opened device node places a log entry in
		the kernel's printk buffer.

		The logged line can be prefixed with a <N> syslog prefix, which
		carries the syslog priority and facility. The single decimal
		prefix number is composed of the 3 lowest bits being the syslog
		priority and the next 8 bits the syslog facility number.

		If no prefix is given, the priority number is the default kernel
		log priority and the facility number is set to LOG_USER (1). It
		is not possible to inject messages from userspace with the
		facility number LOG_KERN (0), to make sure that the origin of
		the messages can always be reliably determined.

		Accessing the buffer:
		Every read() from the opened device node receives one record
		of the kernel's printk buffer.

		The first read() directly following an open() always returns
		first message in the buffer; there is no kernel-internal
		persistent state; many readers can concurrently open the device
		and read from it, without affecting other readers.

		Every read() will receive the next available record. If no more
		records are available read() will block, or if O_NONBLOCK is
		used -EAGAIN returned.

		Messages in the record ring buffer get overwritten as whole,
		there are never partial messages received by read().

		In case messages get overwritten in the circular buffer while
		the device is kept open, the next read() will return -EPIPE,
		and the seek position be updated to the next available record.
		Subsequent reads() will return available records again.

		Unlike the classic syslog() interface, the 64 bit record
		sequence numbers allow to calculate the amount of lost
		messages, in case the buffer gets overwritten. And they allow
		to reconnect to the buffer and reconstruct the read position
		if needed, without limiting the interface to a single reader.

		The device supports seek with the following parameters:
		SEEK_SET, 0
		  seek to the first entry in the buffer
		SEEK_END, 0
		  seek after the last entry in the buffer
		SEEK_DATA, 0
		  seek after the last record available at the time
		  the last SYSLOG_ACTION_CLEAR was issued.

		Due to the record nature of this interface with a "read all"
		behavior and the specific positions each seek operation sets,
		SEEK_CUR is not supported, returning -ESPIPE (invalid seek) to
		errno whenever requested.

		The output format consists of a prefix carrying the syslog
		prefix including priority and facility, the 64 bit message
		sequence number and the monotonic timestamp in microseconds,
		and a flag field. All fields are separated by a ','.

		Future extensions might add more comma separated values before
		the terminating ';'. Unknown fields and values should be
		gracefully ignored.

		The human readable text string starts directly after the ';'
		and is terminated by a '\n'. Untrusted values derived from
		hardware or other facilities are printed, therefore
		all non-printable characters and '\' itself in the log message
		are escaped by "\x00" C-style hex encoding.

		A line starting with ' ', is a continuation line, adding
		key/value pairs to the log message, which provide the machine
		readable context of the message, for reliable processing in
		userspace.

		Example:
		7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
		 SUBSYSTEM=acpi
		 DEVICE=+acpi:PNP0A03:00
		6,339,5140900,-;NET: Registered protocol family 10
		30,340,5690716,-;udevd[80]: starting version 181

		The DEVICE= key uniquely identifies devices the following way:
		  b12:8        - block dev_t
		  c127:3       - char dev_t
		  n8           - netdev ifindex
		  +sound:card0 - subsystem:devname

		The flags field carries '-' by default. A 'c' indicates a
		fragment of a line. Note, that these hints about continuation
		lines are not necessarily correct, and the stream could be
		interleaved with unrelated messages, but merging the lines in
		the output usually produces better human readable results. A
		similar logic is used internally when messages are printed to
		the console, /proc/kmsg or the syslog() syscall.

		By default, kernel tries to avoid fragments by concatenating
		when it can and fragments are rare; however, when extended
		console support is enabled, the in-kernel concatenation is
		disabled and /dev/kmsg output will contain more fragments. If
		the log consumer performs concatenation, the end result
		should be the same. In the future, the in-kernel concatenation
		may be removed entirely and /dev/kmsg users are recommended to
		implement fragment handling.

Users:		dmesg(1), userspace kernel log consumers