1What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health 2Date: June 2018 3KernelVersion: 4.19 4Contact: Vadim Pasternak <vadimpmellanox.com> 5Description: This file shows ASIC health status. The possible values are: 6 0 - health failed, 2 - health OK, 3 - ASIC in booting state. 7 8 The files are read only. 9 10What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version 11What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version 12Date: June 2018 13KernelVersion: 4.19 14Contact: Vadim Pasternak <vadimpmellanox.com> 15Description: These files show with which CPLD versions have been burned 16 on carrier and switch boards. 17 18 The files are read only. 19 20What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir 21Date: December 2018 22KernelVersion: 5.0 23Contact: Vadim Pasternak <vadimpmellanox.com> 24Description: This file shows the system fans direction: 25 forward direction - relevant bit is set 0; 26 reversed direction - relevant bit is set 1. 27 28 The files are read only. 29 30What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version 31Date: November 2018 32KernelVersion: 5.0 33Contact: Vadim Pasternak <vadimpmellanox.com> 34Description: These files show with which CPLD versions have been burned 35 on LED or Gearbox board. 36 37 The files are read only. 38 39What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable 40Date: November 2018 41KernelVersion: 5.0 42Contact: Vadim Pasternak <vadimpmellanox.com> 43Description: These files enable and disable the access to the JTAG domain. 44 By default access to the JTAG domain is disabled. 45 46 The file is read/write. 47 48What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio 49Date: June 2018 50KernelVersion: 4.19 51Contact: Vadim Pasternak <vadimpmellanox.com> 52Description: This file allows iio devices selection. 53 54 Attribute select_iio can be written with 0 or with 1. It 55 selects which one of iio devices can be accessed. 56 57 The file is read/write. 58 59What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on 60 /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on 61 /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle 62 /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down 63Date: June 2018 64KernelVersion: 4.19 65Contact: Vadim Pasternak <vadimpmellanox.com> 66Description: These files allow asserting system power cycling, switching 67 power supply units on and off and system's main power domain 68 shutdown. 69 Expected behavior: 70 When pwr_cycle is written 1: auxiliary power domain will go 71 down and after short period (about 1 second) up. 72 When psu1_on or psu2_on is written 1, related unit will be 73 disconnected from the power source, when written 0 - connected. 74 If both are written 1 - power supplies main power domain will 75 go down. 76 When pwr_down is written 1, system's main power domain will go 77 down. 78 79 The files are write only. 80 81What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref 82What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal 83What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt 84What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd 85What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset 86What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb 87What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail 88What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb 89What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset 90Date: June 2018 91KernelVersion: 4.19 92Contact: Vadim Pasternak <vadimpmellanox.com> 93Description: These files show the system reset cause, as following: power 94 auxiliary outage or power refresh, ASIC thermal shutdown, halt, 95 hotswap, watchdog, firmware reset, long press power button, 96 short press power button, software reset. Value 1 in file means 97 this is reset cause, 0 - otherwise. Only one of the above 98 causes could be 1 at the same time, representing only last 99 reset cause. 100 101 The files are read only. 102 103What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail 104What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex 105What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system 106What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail 107Date: November 2018 108KernelVersion: 5.0 109Contact: Vadim Pasternak <vadimpmellanox.com> 110Description: These files show the system reset cause, as following: ComEx 111 power fail, reset from ComEx, system platform reset, reset 112 due to voltage monitor devices upgrade failure, 113 Value 1 in file means this is reset cause, 0 - otherwise. 114 Only one bit could be 1 at the same time, representing only 115 the last reset cause. 116 117 The files are read only. 118 119What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version 120Date: November 2018 121KernelVersion: 5.0 122Contact: Vadim Pasternak <vadimpmellanox.com> 123Description: These files show with which CPLD versions have been burned 124 on LED board. 125 126 The files are read only. 127 128What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal 129What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd 130What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic 131What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios 132What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd 133What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd 134Date: June 2019 135KernelVersion: 5.3 136Contact: Vadim Pasternak <vadimpmellanox.com> 137Description: These files show the system reset cause, as following: 138 COMEX thermal shutdown; wathchdog power off or reset was derived 139 by one of the next components: COMEX, switch board or by Small Form 140 Factor mezzanine, reset requested from ASIC, reset caused by BIOS 141 reload. Value 1 in file means this is reset cause, 0 - otherwise. 142 Only one of the above causes could be 1 at the same time, representing 143 only last reset cause. 144 145 The files are read only. 146 147What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1 148What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2 149Date: January 2020 150KernelVersion: 5.6 151Contact: Vadim Pasternak <vadimpmellanox.com> 152Description: These files show system static topology identification 153 like system's static I2C topology, number and type of FPGA 154 devices within the system and so on. 155 156 The files are read only. 157 158What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail 159What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform 160What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc 161What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off 162Date: January 2020 163KernelVersion: 5.6 164Contact: Vadim Pasternak <vadimpmellanox.com> 165Description: These files show the system reset causes, as following: reset 166 due to AC power failure, reset invoked from software by 167 assertion reset signal through CPLD. reset caused by signal 168 asserted by SOC through ACPI register, reset invoked from 169 software by assertion power off signal through CPLD. 170 171 The files are read only. 172 173What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis 174Date: January 2020 175KernelVersion: 5.6 176Contact: Vadim Pasternak <vadimpmellanox.com> 177Description: This file allows to retain ASIC up during PCIe root complex 178 reset, when attribute is set 1. 179 180 The file is read/write. 181 182What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp 183Date: January 2020 184KernelVersion: 5.6 185Contact: Vadim Pasternak <vadimpmellanox.com> 186Description: This file allows to overwrite system VPD hardware write 187 protection when attribute is set 1. 188 189 The file is read/write. 190 191What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status 192Date: January 2020 193KernelVersion: 5.6 194Contact: Vadim Pasternak <vadimpmellanox.com> 195Description: This file exposes the configuration update status of burnable 196 voltage regulator devices. The status values are as following: 197 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress. 198 199 The file is read only. 200 201What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version 202Date: January 2020 203KernelVersion: 5.6 204Contact: Vadim Pasternak <vadimpmellanox.com> 205Description: This file exposes the firmware version of burnable voltage 206 regulator devices. 207 208 The file is read only. 209 210What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn 211What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn 212What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn 213What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn 214What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min 215What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min 216What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min 217What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min 218Date: July 2020 219KernelVersion: 5.9 220Contact: Vadim Pasternak <vadimpmellanox.com> 221Description: These files show with which CPLD part numbers and minor 222 versions have been burned CPLD devices equipped on a 223 system. 224 225 The files are read only. 226