1version 1.8.14 2014-03-28 2 * ID: 299 - openipmi plugin writes zero to wrong byte 3 * ID: 301 - Add OS/Hypervisor installation status events 4 * ID: 298 - fix LANplus retry 5 * ID: 295 - inform user if SOL session disconnected 6 * ID: 297 - don't print-out SEL entry if ID not present 7 * ID: 296 - Fix PSD size decoding 8 * ID: 293 - Use of uninitialized variable in ipmi_main() 9 * ID: 278 - Error in sol looptest 10 * ID: 290 - ipmi_sol.c needs a clean-up 11 * ID: 85 - Supermicro memory ECC error display 12 * ID: 290 - ipmi_sol.c needs a clean-up 13 * ID: 286 - Open session retries hit assert in ipmi_lanplus_send_payload 14 * ID: 285 - Fix SEGV in ipmi_lanplus_open_session 15 * ID: 284 - Fix SEGV in ipmi_main 16 * ID: 283 - ipmi_intf_socket_connect fails with IPv4 hosts 17 * ID: 46 - ipmi_fwum needs some re-work 18 * ID: 50 - ipmi_hpmfwupg needs a clean up 19 * ID: 279 - ipmitool sdr list broken 20 * ID: 44 - dummy interface support - fake-ipmistack project 21 * ID: 48 - Remove hard-coded FRU inventory access length restriction 22 * ID: 276 - HPM.1 upgrade combined patch 23 * ID: 90 - Add options to chassis bootparam set bootflag 24 * ID: 292 -Properly handle plugin non-zero target adddress with -t 25 * Numerous Fixes based on running Coverity 26 * Use TIOCFLUSH if TCFLSH is missing to get the serial plugin building on 27 Hurd. 28 * Disable imb and open plugins by default on Hurd. The platform lack 29 the required kernel support. 30 * Change serial plugin to only try to disable the IUCLC serial line flag on 31 platforms supporting it. Fixes build problem on Hurd and FreeBSD. 32 * PA: 83 - Revised IPv6 patch 33 * FR: 24 - Exchange OS Name Hostname BMC URL during startup 34 * ID: 304 - Incorect byteswap in SOL maximum payload 35 * ID: 303 - Fix build error in HPM.2 code 36 * ID: 300 - new sunoem functionality 37 * ID: 144 - Fix 'dcmi power set_limit action <value>' 38 * ID: 302 - HPM.2 long message support 39 * ID: 309 - Add new SEL entries for ipmi 2.0 rev 1.1 40 41version 1.8.13 2013-09-09 42 * ID: 3611905 - Direct Serial Basic/Terminal Mode Interface drivers 43 * ID: 3577766 - configure's knobs and switches don't work 44 * ID: 3611253 - do not override OS-default values for interfaces 45 * ID: 65 - Fixes for configure.in for cross compilation 46 * ID: 3571153 - OpenIPMI/ipmievd fails to compile on Solaris 47 * numerous ipmitool man page updates 48 * ID: 3611226 - Bridging support for PICMG Platforms 49 * Add support for getsysinfo/setsysinfo commands to ipmi mc 50 * Cleanup Dell OEM code to use new sysinfo interface 51 * ID: 93 - str-to-int conversion is weak 52 * ID: 3582307 - ipmi_fru - ipmi_fru_main() return codes 53 * ID: 3582310 - ipmi_fru - ipmi_fru_main() - misuse of printf() 54 * ID: 3576213 - ipmi_fru - unused variable 55 * ID: 3578276 - ipmi_fru - free() on freed memory possible 56 * ID: 3578275 - ipmi_fru - memory leaks 57 * ID: 3528271 - ipmi_fru - possible *flow via FRUID 58 * ID: 3578277 - ipmi_fru - possible NULL pointer 59 * ID: 3612372 - Recognize Broadcom IANA number and BCM5725 product 60 * ID: 3608758 - add IPMI_NETFN_OEM 61 * ID: 143 - Reversed 'channel authcap' capabilities 62 Fixes reversed IPMIv1.5/2.0 'channel authcap' capabilities 63 * ID: 3587318 - "dcmi discover" is not DCMI 1.5 compatible 64 * ID: 3608757 - ipmi_fru - various fixes 65 * ID: 3598203 - 'mc getsysinfo|setsysinfo' needs a bit of re-work 66 * ID: 3597782 - ipmi_mc - sysinfo_param() has two consecutive returns 67 * ID: 3597781 - 'mc getsysinfo|setsysinfo' help has typos 68 * ID: 3608763 - ipmi_sdr - code cleanup & output display cleanup 69 * ID: 3610286 - ipmi_sdr - ipmi_sdr_print_type - incorrect eval 70 * ID: 3600930 - ipmi_sdr - code cleanup 71 * ID: 3602439 - ipmi_sdr - memory leaks 72 * ID: 3595199 - ipmi_sdr - Add support for 'ipmitool sdr <list|elist> help' 73 * ID: 3592773 - 'ipmitool sdr info'; prints incorrect info 74 * ID: 3592770 - 'ipmitool sdr list|elist INV_INPUT' return code 75 * ID: 3577159 - ipmi_sdr - uint32_t cast to uint8_t and back 76 * ID: 3528368 - ipmi_sdr - possible int *flow 77 * ID: 226 - ipmi_sdradd - typo 78 * ID: 258 - ipmi_sdradd - error printed on STDOUT 79 * Fixed ipmievd start under systemd. 80 * ID: 3608760 - Add bswap.h to ipmi_chassis.c and ipmi_pef.c 81 * ID: 3564701 - ipmitool 1.8.12 doesn't build on big endian architectures 82 * ID: 3600907 - defined value for "Chassis may not support Force Identify" 83 * ID: 256 - ipmitool could crash when IPv6 address is returned 84 * ID: 211 - 'lib/ipmi_dcmi.c' - typo & error printed on STDOUT 85 * ID: 3612237 - If DCMI command fails, incorrect completion code is printed 86 * ID: 3608149 - ipmitool - set pointer to NULL after free() 87 * ID: 3603419 - DCMI - waste of resources 88 * ID: 3600908 - DMCI - crash in ipmi_print_sensor_info(), NULL ref 89 * ID: 3609985 - delloem : Wrong MAC returned when flex addressing is enabled 90 * ID: 113 - delloem exec file won't handle more than one command 91 * ID: 28 - delloem - clean up the code 92 * ID: 3608261 - delloem - code formatting 93 * ID: 3528247 - delloem - fix possible *int flows 94 * ID: 3600910 - delloem - code cleanup 95 * ID: 3576211 - delloem - unused variable 96 * ID: 3578022 - delloem - fix typos 97 * ID: 263 - ipmi_ek* - cleanup 98 * ID: 3308765 - ipmi_ek* - cleanup 99 * ID: 3586228 - ipmi_ek* - ipmi_ekanalyzer_usage() rework 100 * ID: 3528388 - ipmi_ek* - a typo in error message 101 * ID: 3576212 - ipmi_event - better rsp handling 102 * ID: 3607393 - ipmi_event - redundant '\n' in error message 103 * ID: 153 - ipmi_firewall - printf() used instead of lprintf() 104 * ID: 3608003 - ipmi_fru - atol() should be replaced with str2*() 105 * ID: 3600911 - ipmi_fru - fix multiple increments in args to printf 106 * ID: 3600914 - no more crash on no response. allow more send/recv loops of waiting. 107 * ID: 70 - Fixes and updates for ipmitool hpm 108 * ID: 3528308 - ipmi_hpmfwupg - possible int *flow 109 * ID: 3608762 - ipmi_hpmfwup - Fixed help messages for hpm command 110 * ID: 3607981 - ipmi_lanp - replace atoi() calls 111 * ID: 3607320 - ipmi_lanp - possible NULL reference 112 * ID: 3600926 - ipmi_lanp - code cleanup 113 * ID: 3613575 - memory leak - ipmi_password_file_read() 114 * ID: 3522740 - reading password from file is limited to 16byte passwords 115 * ID: 3613605 - ipmi_main - call free() on pointer to static data 116 * ID: 3608761 - ipmi_main - PICMG Get Device Locator was never run 117 * ID: 3577155 - ipmi_main' - memory leaks 118 * ID: 239 - typo in 'mc selftest', add details 119 * ID: 3597471 - ipmi_mc - needs a bit of re-work - rc, inv. options 120 * ID: 3597468 - ipmi_mc - print_mc_usage() prints to STDOUT 121 * ID: 3597469 - 'mc watchdog off' prints on STDERR, should be STDOUT 122 * ID: 3597470 - 'mc watchdog reset' prints on STDERR, should be STDOUT 123 * ID: 3611254 - OEM handle for Intel 82751 in SPT mode 124 * ID: 3600927 - change eval order of input param in ipmi_oem_setup() 125 * ID: 3600928 - ipmi_pef - code cleanup 126 * ID: 3592732 - ipmi_picmg.c - printf() misuse 127 * ID: 3528310 - ipmi_picmg.c - NULL reference 128 * ID: 3528347 - ipmi_raw.c - possible int *flow 129 * ID: 3587913 - Command % ipmitool raw help; returns 1 130 * Added code to support sensors on other luns (On behalf of Kontron Germany) 131 * ID: 3611912 - Add missing newlines when cvs output is specified 132 * ID: 244 - ipmi_sel - "0.0" displayed for unspecified threshold values 133 * ID: 3612371 - Typo in impi_sel debug output 134 * ID: 3016359 - ipmi_sel - Get SEL Alloc Information is incorrect 135 * ID: 3568976 - 'sel set time' behaviour is inconsistent 136 * ID: 3528371 - ipmi_sensor - possible int *flow 137 * ID: 3601265 - 'ipmitool sensor get' leaks memory 138 * ID: 3601106 - 'ipmitool sensor get NACname' output incorrect/inconsistent 139 * ID: 3608007 - ipmi_session - typo in error message 140 * ID: 101 - ipmi_sol - possible int *flow 141 * ID: 3600933 - ipmi_sol - use of deprecated bzero() 142 * ID: 3609472 - ipmi_sol - Add the instance to the SOL commands 143 * ID: 3588726 - 'ipmitool sol payload status ...;'segfaults on no rsp 144 * ID: 3522731 - ipmi_sol - ipmi_get_sol_info() returns always 0 145 * ID: 3613042 - add missing Entity IDs 146 * ID: 3611306 - ipmi_tsol - fix always fail in case of error 147 * ID: 259 - ipmi_user - memory leak 148 * ID: 260 - ipmi_user - replace atoi() call 149 * ID: 2871903 - ipmitool user priv incorrectly sets Link Auth 150 * ID: 3600960 - check the copy of password exists 151 * ID: 3609473 - Add assertion/deassertion to threshold events 152 * ID: 104 - ipmishell - possible int *flow 153 * ID: 262 - 'set' segfaults when no IPMI inf present 154 * ID: 257 ipmitool exec segfaults if invalid input given 155 * ID: 254 - Fix retry of authentication capabilities retrieval 156 * ID: 3611303 - lan - error check is missing braces 157 * ID: 253 - Fix lanplus retransmission 158 * ID: 212 - 'lib/ipmi_dcmi.c' - possible int *flow 159 * ID: 264 - incorrect array index in get_lan_param_select() 160 * ID: 269 - Fixes for configure.in for cross compilation 161 * ID: 267 - Corruption in "lan alert print" output 162 * ID: 41 - ipmi_sel_interpret() - clean up formatting, indentation 163 * ID: 242 - Incorrect DCMI Power Reading "IPMI timestamp" interpretation 164 * ID: 229 - 'lib/ipmi_ekanalyzer.c' - a typo ``Too few argument!'' 165 * ID: 266 - file descriptor leak in ipmi_fwum and ipmi_ekanalyzer 166 * ID: 99 - 'lib/ipmi_sel.c' - possible int *flow 167 * ID: 222 - 'lib/ipmi_sdr.c' - a typo 'Not Reading' -> 'No Reading' 168 * ID: 35 - Script to setup redirection of SNMP to/from BMC 169 * ID: 273 - Reduce SOL Input buffer size by SOL header size 170 171 172version 1.8.12 released 2012-08-09 173 * Added IPMB dual bridge support (no need for driver support) 174 * Enable compiler warnings and resolve all compiler warning so that 175 ipmitool compiles and links with no warning or error messages 176 * add ipmishell line to configure 177 * fail configure when no curses or readline is found 178 * support sensor bridging in free interface 179 * applied fix for issue #2865160 (AIX build) 180 * Document the ipmitool dcmi commands in the ipmitool man page 181 * Document that some commands are blocked by OpenIPMI. ID 2962306 182 * Document the -N and -R options per tracker ID 3489643 183 * fix manpage misdocumentation on cipher suite privilige configuration 184 * Add build support for Dell OEM commands 185 * Add new Dell OEM commands and update man page 186 * added hpm and fwum in man page 187 * man page update for fwum and hpm commands 188 * Added documentation for 'ime' operating mode, used to update Intel ME. 189 * add new -Y option to prompt user to enter kgkey 190 * Add DCMI module (Data Center Management Interface) 191 * fixed oem/iana data type to allow 24 bits definition 192 * Fixed AMC point-to-point record parsing in FRU 193 * Fixed detection of packing support in GCC 194 * Added packing support detection magic on all packed structures 195 in project 196 * Dell specific mac sub command is updated to support the latest 12G 197 Dell servers. Support for virtual mac is also implemented. 198 * Use consistent netfn/cmd for getsysinfo command 199 * Add Dell OEM network commands 200 * Resolve incorect Board Mfg Data due to incorrect date constant 201 * Update ipmi_fru.h to SMBIOS spec 2.6.1 - ID 2916398 202 * Support for analog readings in discrete sensors on HP platforms. 203 * Change device id mask (IPM_DEV_DEVICE_ID_REV_MASK) 0x07 for 0x0F. 204 As per in IPMI spec V2: 205 * Added PICMG clock e-keying and bused resource control identifiers 206 * Added PICMG major version (ATCA/AMC/uTCA) identifiers 207 * Correct Threshold/Discrete Sensor Display - Patch Tracker ID 3508759 208 * Sensor units now handle percentage units - ID 3014014 209 * Fixes ID 3421347 Sensor list command should use channel field from SDR 210 * Added packing directive for ARM cross compile with GCC 3.4.5, 211 otherwise the sdr structures gets padded and the pointer cast 212 result in incorrect alignement 213 * Added 'sdr fill sensors nosats' support to speed up SDR discovery 214 * Added SDR name display during discovery (with -v) 215 * Added support for sensor types - Processor related sensor 216 type 0x07, system incharectorization 0x20, Memory sensor type. 217 * Give more description for SEL which is generated for Uncorrectable 218 ECC and errors with respect to each Memory Bank,Card or DIMM. 219 The Sensor type supporting this are 0x0C and 0x10. 220 * Add more details about Version Change event (source of 221 firmware update) 222 * enhanced PICMG fru control 223 * Integrated Andy Wray's DDR3 SPD parser patch 224 * Adds function str2uint() to convert from string to uint32_t with 225 checks for valid input. 226 * Fix possible buffer overflow in buf2str() 227 * Fixes ID 3485004 - misuse of strtol() 228 * Replaces calls to strtol() with str2uchar() calls and adds error 229 messages if invalid input is given. 230 * Don't overwite the iflags bits prior to setting the boot parameters. 231 This fixes ipmitool so that 232 chassis bootdev bios clear-cmos=yes 233 will correctly clear the bios cmos. 234 * Clarify DCMI get limit activation (add if activate or not). 235 * Bug fixes for delloem lan command. This includes the support for 12G 236 Dell license and 12G LAN Specific command. 237 * delloem commands should not be executed before parsing command line. 238 * Fix stack overflow in delloem setled 239 * Fix delloem powermonitor on big-endian platforms. 240 * ipmitool delloem powermonitor command should convert data from 241 network-format to the native one, otherwise it shows garbage 242 on ppc/ppc64 platform. 243 * Add ipmi_getsysinfo command 244 * Add support for drive backplane SetLED functionality 245 * Fix for Platform Event Message incorrect Generator ID 246 * Fix fru print so that it will display FRU info from satellite 247 controllers. 248 * Add support for AMC type 17h record. 249 * Fix in fru edit. It is now possible to edit field 0 of sections 250 * New FRU get OEM record command 251 * fixed segfault for fru edit when "field id" is not supported and 252 added user feedback for string substitution(success or failure) 253 * Improvement to hpm upgrade during activation. This resolves issue 254 where activation seems to have failed because ipmitool received 255 an unsupported completion code. 256 * hpm Fixes for multi-platform support. 257 * hpm Fix for timeouts during firmware rollback. If completion code 258 is C3, wait till timeout has expired before reporting it. 259 * hpm During manual rollback, code now gets target capabilities 260 instead of using a default timeout of 60 seconds. 261 * Added firmware auxilliary bytes to hpm outputs 262 * hpm Add support for BIG Buffer (Use when -z option is used) 263 * Fix the case where ipmitool loses the iol connection during the upload 264 block process. Once IPMITool was successfully sent the first 265 byte, IPMITool will not resize the block size. 266 * Fix the problem when we try to upgrade specific component and the 267 component is already updated, 268 * updated HPM firmware agent to version 1.04 269 * Fix exit code to return zero on '-o list' or '-o help' option 270 * limit length of user name and password that can be supplied by user. 271 Password is limited to 16 bytes, resp. 20 bytes, for LAN, resp. 272 LAN+, interface. User name is limited to 16 bytes, no interface 273 limitations. ID 3184687, ID 3001519 274 * Add retry / timeout options for LAN 275 * Changed default cipher suite to 1 instead of 3 for iol20 276 * added fix for tracker ID 2849300 "Incorrect Firmware Revision" 277 * avoid reopening the interface when already opened 278 * Remove message for unsupported PEF capabilities that return valid 279 CC (80h) 280 * Added OEM byte (47) to verbose output 281 * Add option to provide a list when filling sdr repository 282 * SDR discovery speedups 283 * Added support for Dell specific sensors 284 * Fix segmentation fault on unrecognize OEM events. 285 * changed SEL timestamp formatting for 'preinit' SEL entries, allowing 286 the number of seconds to be displayed. 287 * Added sensor raw data in verbose mode. Useful for OEM sensor type. 288 * Add sensor hysteresis (positive & negative) to the following command 289 ipmitool sensor -v 290 * Fixes bug ID 3484936 - missing user input validation 291 * Add missing RMCP+ auth type strings 292 * Add new Kontron Product in ipmi_strings for product ID. Kontron 293 KTC5520/EATX Server Motherboard with integrated iBMC/KVM/VM 294 added identification support for Kontron AT8050 ATCA board 295 * Constrain setting of the username to no greater than 16 characters 296 per the IPMI specification. ID 3001519 297 * Constrain User ID between 1 and 63. ID 3519225 298 * Fixes ID 3485340 - user input not handled in 'lib/ipmi_user.c' 299 * Fixes ignorance of existing daemon PID file which results in PID being 300 overwritten. Adds proper umask() before writing PID file. 301 * applied fix for ID 2865111 (AIX build) 302 * Fix a proplem when using bridged IPMI commands on the lanplus 303 interface (-I lanplus with -b -t or -m switches) resulting in 304 "Close Session command failure". 305 * Add fix with usage of CFh (duplicate request). Usefull for 306 slow commands 307 * Fix issue with sequence number. (Speed up transfer) 308 309version 1.8.11 released 2009-02-25 310 * Fix new GCC compilation issues in regards to Packing 311 * Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded 312 for 2.4 kernel instead of ipmi_si_drv driver module 313 * New -y option added to allow specification of kg keys with 314 non-printable characters 315 * New -K option added to allow kgkey settings via environmental 316 variable IPMI_KGKEY 317 * Generic device support added for EEPROM with SDR Type 10h (gendev) 318 * Fix to lan-bridging for a double-bridging crash and to fix 319 an issue with bridging multiple concurrent requests and 320 erroneous handling of raw Send Message 321 * Lanplus fix for commands like 'sensor list' without the -t option 322 causing wrong double bridged requests of a sensor is located 323 on another satellite controller 324 * Fix lan and lanplus request list entry removal bugs 325 * Fix non-working issue when trying to send a bridge message with 326 Cipher 3 327 * Change bridge message handling to reuse command ipmi_lan_poll_recv 328 * Added PICMG 2.0 and 2.3 support 329 * Fix PICMG (ATCA) extension verification and reversal of BCD encoded 330 values for "major" and "minor" fields 331 * Add IANA support for Pigeon Point 332 * Add OEM SW/FW Record identification 333 * Fix to include I2C and LUN addresses so sensors are correctly managed 334 * Patch ID 1990560 to get readings from non-linear analog sensors 335 * Add support for SOL payload status command 336 * SOL set parameter range checking added 337 * Fixed SOL activate options usage 338 * Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967) 339 * Added retries to SOL keepalive 340 * Fixed wrong mask values for Front Panel disable/enable status 341 * Add support to access fru internal use area 342 * Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow 343 blocks of data within the FRU storage area to be write 344 protected. 345 * Fix node reporting in GUID; Tracker bug #2339675 346 * Fix watchdog use/action print strings 347 * Fix endian bug in SDR add from file; Tracker bug #2075258 348 * Fix crash when dumping SDRs in a file and there's an error 349 getting an SDR; improve algorithm for optimal packet size 350 * Fix occasional SDR dump segfault; #1793076 351 * Allow ipmitool sel delete to accept hex list entry numbers 352 * Fix SEL total space reporting. 353 * Fix for garbage sensor threshold values reported when none 354 returned. Tracker Bug #863748 355 * ipmievd change to Monitor %used in SEL buffer and log warnings when 356 the buffer is 80% and 100% full 357 358version 1.8.10 released 2008-08-08 359 * Added support for BULL IANA number. 360 * Fixed contrib build so the oem_ibm_sel_map file gets included in 361 rpm builds again. 362 * Added support for Debian packages to be built from CVS 363 * Fix for sdr and sel timestamp reporting issues 364 * Fix for discrete sensor state print routines to address state 365 bits 8-14 366 * Change ipmi_chassis_status() to non-static so it can be used 367 externally 368 * Added retries to SOL keepalive 369 * Fix to stop sensor list command from reporting a failure due 370 to missing sensor 371 * Fix bug in sdr free space reporting 372 * Add support for IANA number to vendor name conversion for many 373 vendors 374 * Fix segfault bug in lan set command 375 * Fix bug in population of raw i2c wdata buffer 376 * Fix bug in ipmb sensor reading 377 * Fix misspellings, typos, incorrect strncmp lengths, white space 378 * Update/fix printed help and usages for many commands 379 * Add and update support for all commands in ipmitool man page 380 * Fix for lanplus session re-open when the target becomes unavailable 381 following a fw upgrade activation 382 * Add support for watchdog timer shutoff, reset, and get info 383 * Add support for more ibm systems in oem_ibm_sel_map 384 * Add more JEDEC support info for DIMMs; decrease request size 385 for DIMM FRU info to 16 bytes at a time to allow more 386 DIMM FRUs to respond. 387 * Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg 388 buffer length more aggressively when no response from iol 389 * Fix HPM firmware activation via IOL; fake a timeout after IOL 390 session re-open to force get upgrade status retry; 391 Added retries on 0xD3 completion code 392 * Add support for freeipmi 0.6.0; adjust autoconf for changes 393 * Fix for oemval2str size 394 * Add support for product name resolution in mc info 395 * Fix FRU display format 396 * Added PICMG ekeying analyzer module support (ekanalyzer); 397 display point to point physical connectivity and power 398 supply information between carriers and AMC modules; 399 display matched results of ekeying match between an 400 on-carrier device and AMC module or between 2 AMC modules 401 * Fix AMC GUID display support 402 * Improved amcportstate operations 403 * Added resolution for new sensor types 404 * Fix segfault in SOL 405 * Fix bug that caused infinite loop on BMCs with empty SDRs 406 * Fix to move out Kontron OEM sensor resolution for other OEMs 407 which could lead to bad event descriptions 408 * Add new FRU edit mode thereby allowing serial numbers, etc. to be 409 changed; improvements to OEM edit mode 410 * Added SPD support for parms: channel number, max read size 411 * Add SDR support for adding SDR records from a dumped file, 412 clearing SDR, adding partial SDR records 413 * Add updates and fixes to hpmfwupg: upload block size to 32 bytes 414 for KCS, handle long response option, implement rollback 415 override, garbage output fix 416 * Add double bridge lan support , fix bridging issue 417 * Add HPM support to pre-check which components need to be skipped 418 * Fix autodetection of maximum packet size when using IPMB 419 * Add new Kontron OEM command to set the BIOS boot option sequence 420 * Add support for dual-bridge/ dual send message 421 * Add auto-detect for local IPMB address using PICMG 2.X extension 422 * Add support for HPM.1 1.0 specification compliance 423 * Fix for improper lan/lanplus addressing 424 * Added transit_channel and transit_addr to ipmi_intf struct 425 * Fix bad password assertion bug due to rakp2 HMAC not being checked 426 properly 427 * Added ability to interpret PPS shelf manager clia sel dump 428 * Corrected PICMG M7 state event definition macros 429 * Added FRU parsing enhancements 430 * Added "isol info", "isol set" and "isol activate" commands 431 to support Intel IPMI v1.5 SOL functionality. Removed 432 "isol setup" command. 433 * Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces. 434 * Fix bug in "chassis poh" command. 435 * Fix HPM.1 upgrade to apply to only given component when instructed 436 to do so 437 * Added configure auto-detection if dual bridge extension 438 is supported by OpenIPMI 439 440version 1.8.9 released 2007-03-06 441 * Added initial AMC ekey query operation support 442 * Improvements to ekeying support (PICMG 3.x only) 443 * Added initial interactive edition support for multirec; added IANA 444 verification before interpreting PICMG records. 445 * Added edit support for AMC activation "Maximum Internal Current" 446 * Fix bug generating garbage on the screen when handling GetDeviceId 447 and sol traffic occurs 448 * Added ability to map OEM sensor types to OEM description string using 449 IANA number; moved IANA number table 450 * Fix lan set access command to use value already saved within 451 parameters for PEF and authentication 452 * Fix bug in cmd ipmitool lan stats get 1 453 * Add support to allow ipmitool/ipmievd to target specific device 454 nodes on multi-BMC systems 455 * Add support for name+privilege lookup for lanplus sessions 456 * Fix time_t conversion bug for 64-bit OS 457 * Added prefix of hostname on sel ipmievd sessions 458 * Fixed FWUM Get Info 459 * Fix ipmievd fd closing bug 460 * Add set-in-progress flag support to chassis bootdev 461 * Added new chassis bootdev options 462 * Add sol payload enable/disable comman 463 * Fix SOL set errors when commit-write not supported 464 * Fix reset of session timeout for lanplus interface 465 * Fixed lan interface accessibility timeout handling 466 * Fix bug with Function Get Channel Cipher Suites command when 467 more than 1 page used. 468 * Fix missing firmware firewall top-level command 469 * Fix bug in SOL keepalive functionality 470 * Fix SOLv2 NACK and retry handling for Intel ESB2 BMC 471 * Added ipmi_sel_get_oem_sensor* APIs 472 * Added HPM.1 support 473 * Fix segfault when incorrect oem option supplied 474 * Fix bus problem with spd command 475 * Fix segfault in SOL when remote BMC does not return packet 476 * Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes 477 * Added lan packet size reduction mechanism 478 * Fix bug with sendMessage of bad length with different target 479 * Fix for big endian (PPC) architecture 480 * NetBSD fixes 481 * Fix segfault and channel problem with user priv command 482 * Add support for bus/chan on i2c raw command 483 * Add freeipmi interface support 484 * Add remote spd printing 485 * Add better detection of linux/compiler.h to config 486 * Makefile changes to fix makedistcheck, etc. 487 488version 1.8.8 489 * Fix segfaults in sensor data repository list 490 * Fix ipmievd to open interface before daemonizing 491 * Fix IPMIv1.5 authtype NONE to ignore supplied password 492 * Fix cipher suite display bug in lan print 493 * Fix typo in IPMIv2 SOL output when sending break 494 * Fix improper LUN handling with Tyan SOL 495 * Add LUN support to OpenIPMI interface 496 * Add support for Kontron OEM commands 497 * Update to Kontron Firmware Update command 498 499version 1.8.7 500 * Remove nuclear clause from license 501 * Add Sun OEM command for blades 502 * Increase argument size for raw commands in shell/exec 503 * Fix handling of LUNs for LAN interfaces 504 * Add IPMIv2 SOL loopback test 505 * Add support for IBM OEM SEL messages 506 * Disable file paranoia checks on read files by default 507 * Support IPMIv2 SOL on older Intel boxes 508 * Display message and exit if keepalive fails during SOL 509 * Add support for setting VLAN id and priority 510 * Add support for FreeBSD OpenIPMI-compatible driver 511 * Add support for IPMIv2 Firmware Firewall 512 * Fix gcc4 compile warnings 513 * Make ipmievd generate pidfile 514 * Add initscripts for ipmievd 515 516version 1.8.6 517 * Fix memory corruption when sending encrypted SOL traffic 518 * Add keepalive timer to IPMIv2 SOL sessions 519 520version 1.8.5 521 * Add support for settable SOL escape character with -e option 522 * Add support for Kg BMC key for IPMIv2 authentication with -k option 523 * Add support for Tyan IPMIv1.5 SOL with tsol command 524 * Add support for PICMG devices 525 * Add support for OEM SEL event parsing 526 * Add support for command bridging over lan and lanplus interfaces 527 * New 'chassis selftest' command 528 * Many bufxies and patches from contributors 529 530version 1.8.3 531 * Add support for 'sel readraw' and 'sel writeraw' commands. 532 * Add support for entering NetFn as a string for RAW commands. 533 * Add support for appending distro tag to integrated RPM builds. 534 * Fix LAN parameter printing to handle Invalid Data Field response 535 without errors. 536 * Add 5ms delay to IPMIv2 SOL retry packets 537 * IPMIv2 interface will now correctly set session privilege level 538 to requested level after session is opened. 539 540version 1.8.2 (released May 18 2005) 541 * Fix FRU reading for large (>255 bytes) areas. 542 * Overhaul to ipmievd to support SEL polling in addition to OpenIPMI. 543 * Fix LAN parameter segfault when no Ciphers supported by BMC. 544 * Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus). 545 * Separate option parsing code from main ipmitool source file. 546 * Add raw I2C support with IPMI Master Read-Write command. 547 * Add support for new 'sdr elist' extended output format. 548 * Add support for listing sensors by type with 'sdr type' command. 549 * Add support for new 'sel elist' extended output format that 550 cross-references events with sensors. 551 * Add support for sending dynamically generated platform events 552 based on existing sensor information. 553 * New '-S' argument to read local SDR cache created with 'sdr dump'. 554 * Updated manpage for ipmitool and ipmievd. 555 556version 1.8.1 557 * ipmievd installs in /usr/sbin 558 559version 1.8.0 560 * Fix IPMIv2.0 issues 561 * Fix chassis boot parameter support 562 * Add support for linear sensors 563 564version 1.7.1 565 * Update bmc plugin to work with new Solaris bmc driver (new ioctl 566 for interface detection and new STREAMS message-based interface) 567 568version 1.7.0 569 * Propogate errors correctly so exit status will be useful 570 * More consistent display of errors including completion code text 571 * Errors and debug is send to stderr now 572 * New "sel get" command that will print details about SEL entry 573 and corresponding SDR records as well as FRUs via entity association 574 * Improved event generator, now supports reading events from text file 575 * New "-o oemtype" option for specifying OEM boards 576 exsting types are "supermicro" and "intelwv2" 577 * New PEF subsystem from Tim Murphy at Dell 578 * New "bmc" plugin for Solaris 10 x86 579 * Many bugfixes and contributed patches 580 581version 1.6.2 582 * Support for Supermicro BMC OEM authentication method 583 584version 1.6.1 585 * Fix minor problem with LAN parameter setting 586 587version 1.6.0 588 * Add a README file 589 * Add Solaris x86 interface plugin 590 * Add support for building Solaris packages 591 * Fix segfault when doing "sel list" (from Matthew Braithwaite) 592 * Fix "chassis identify" on some BMCs (from ebrower@sourceforge) 593 * Add command "bmc info" and related output (from ebrower@sourceforge) 594 * Add support for IPMIv2 and Serial-over-LAN from Jeremy at Newisys 595 * Add support for building RPMs as non-root user 596 * Add new "shell" and "exec" commands 597 * Lots of other contributed patches 598 599version 1.5.9 600 * Add ability to get a particular sensor by name 601 * Add ability to set a particular sensor threshold 602 * Add support for displaying V2 channel authentication levels 603 * Add README for rrdtool scripts in contrib directory 604 * Improve lan interface retry handling 605 * Support prompting for password or reading from environment 606 * Move chaninfo command into channel subcommand 607 * Fix reservation ID handling when two sessions open to BMC 608 * Fix reading of large FRU data 609 * Add configure option for changing binary to ipmiadm for Solaris 610 * Fix compile problem on Solaris 8 611 612version 1.5.8 613 * Enable static compilation of interfaces 614 * Fix types to be 64-bit safe 615 * Fix compilation problems on Solaris 616 * Fix multiple big-endian problems for Solaris/SPARC 617 * Fix channel access to save settings to NVRAM 618 * Set channel privilege limit to ADMIN during "access on" 619 * Enable gratuitous ARP in bmcautoconf.sh 620 * Add support for Linux kernel panic messages in SEL output 621 * Add support for type 3 SDR records 622 623version 1.5.7 624 * Add IPMIv1.5 eratta fixes 625 * Additions to FRU printing and FRU multirecords 626 * Better handling of SDR printing 627 * Contrib scripts for creating rrdtool graphs 628 629version 1.5.6 630 * Fix SEL event decoding for generic events 631 * Handle empty SEL gracefully when doing "sel list" 632 * Fix sdr handling of sensors that do not return a reading 633 * Fix for CSV display of sensor readings/units from Fredrik �hrn 634 635version 1.5.5 636 * Add -U option for setting LAN username 637 * Fix -v usage for plugin interfaces 638 639version 1.5.4 640 * Put interface plugin API into library 641 * Fix ipmievd 642 643version 1.5.3 644 * Add -g option to work with grizzly bmc 645 646version 1.5.2 647 * Add support for setting gratuitous arp interval 648 649version 1.5.1 650 * Better SEL support 651 * Fix display bug in SDR list 652 653version 1.5.0 654 * More robust UDP packet handling 655 * Add Intel IMB driver support 656 * Use autoconf/automake/libtool 657 658