1version 1.8.14 2014-03-28 2 * ID: 299 - openipmi plugin writes zero to wrong byte 3 * ID: 301 - Add OS/Hypervisor installation status events 4 * ID: 298 - fix LANplus retry 5 * ID: 295 - inform user if SOL session disconnected 6 * ID: 297 - don't print-out SEL entry if ID not present 7 * ID: 296 - Fix PSD size decoding 8 * ID: 293 - Use of uninitialized variable in ipmi_main() 9 * ID: 278 - Error in sol looptest 10 * ID: 290 - ipmi_sol.c needs a clean-up 11 * ID: 85 - Supermicro memory ECC error display 12 * ID: 290 - ipmi_sol.c needs a clean-up 13 * ID: 286 - Open session retries hit assert in ipmi_lanplus_send_payload 14 * ID: 285 - Fix SEGV in ipmi_lanplus_open_session 15 * ID: 284 - Fix SEGV in ipmi_main 16 * ID: 283 - ipmi_intf_socket_connect fails with IPv4 hosts 17 * ID: 46 - ipmi_fwum needs some re-work 18 * ID: 50 - ipmi_hpmfwupg needs a clean up 19 * ID: 279 - ipmitool sdr list broken 20 * ID: 44 - dummy interface support - fake-ipmistack project 21 * ID: 48 - Remove hard-coded FRU inventory access length restriction 22 * ID: 276 - HPM.1 upgrade combined patch 23 * ID: 90 - Add options to chassis bootparam set bootflag 24 * ID: 292 -Properly handle plugin non-zero target adddress with -t 25 * Numerous Fixes based on running Coverity 26 * Use TIOCFLUSH if TCFLSH is missing to get the serial plugin building on Hurd. 27 * Disable imb and open plugins by default on Hurd. The platform lack the required kernel support. 28 * Change serial plugin to only try to disable the IUCLC serial line flag on platforms supporting it. Fixes build problem on Hurd and FreeBSD. 29 * Add support for enabling/disabling PEF policy entries 30 * PA: 83 - Revised IPv6 patch 31 * FR: 24 - Exchange OS Name Hostname BMC URL during startup 32 33version 1.8.13 2013-09-09 34 * ID: 3611905 - Direct Serial Basic/Terminal Mode Interface drivers 35 * ID: 3577766 - configure's knobs and switches don't work 36 * ID: 3611253 - do not override OS-default values for interfaces 37 * ID: 65 - Fixes for configure.in for cross compilation 38 * ID: 3571153 - OpenIPMI/ipmievd fails to compile on Solaris 39 * numerous ipmitool man page updates 40 * ID: 3611226 - Bridging support for PICMG Platforms 41 * Add support for getsysinfo/setsysinfo commands to ipmi mc 42 * Cleanup Dell OEM code to use new sysinfo interface 43 * ID: 93 - str-to-int conversion is weak 44 * ID: 3582307 - ipmi_fru - ipmi_fru_main() return codes 45 * ID: 3582310 - ipmi_fru - ipmi_fru_main() - misuse of printf() 46 * ID: 3576213 - ipmi_fru - unused variable 47 * ID: 3578276 - ipmi_fru - free() on freed memory possible 48 * ID: 3578275 - ipmi_fru - memory leaks 49 * ID: 3528271 - ipmi_fru - possible *flow via FRUID 50 * ID: 3578277 - ipmi_fru - possible NULL pointer 51 * ID: 3612372 - Recognize Broadcom IANA number and BCM5725 product 52 * ID: 3608758 - add IPMI_NETFN_OEM 53 * ID: 143 - Reversed 'channel authcap' capabilities 54 Fixes reversed IPMIv1.5/2.0 'channel authcap' capabilities 55 * ID: 3587318 - "dcmi discover" is not DCMI 1.5 compatible 56 * ID: 3608757 - ipmi_fru - various fixes 57 * ID: 3598203 - 'mc getsysinfo|setsysinfo' needs a bit of re-work 58 * ID: 3597782 - ipmi_mc - sysinfo_param() has two consecutive returns 59 * ID: 3597781 - 'mc getsysinfo|setsysinfo' help has typos 60 * ID: 3608763 - ipmi_sdr - code cleanup & output display cleanup 61 * ID: 3610286 - ipmi_sdr - ipmi_sdr_print_type - incorrect eval 62 * ID: 3600930 - ipmi_sdr - code cleanup 63 * ID: 3602439 - ipmi_sdr - memory leaks 64 * ID: 3595199 - ipmi_sdr - Add support for 'ipmitool sdr <list|elist> help' 65 * ID: 3592773 - 'ipmitool sdr info'; prints incorrect info 66 * ID: 3592770 - 'ipmitool sdr list|elist INV_INPUT' return code 67 * ID: 3577159 - ipmi_sdr - uint32_t cast to uint8_t and back 68 * ID: 3528368 - ipmi_sdr - possible int *flow 69 * ID: 226 - ipmi_sdradd - typo 70 * ID: 258 - ipmi_sdradd - error printed on STDOUT 71 * Fixed ipmievd start under systemd. 72 * ID: 3608760 - Add bswap.h to ipmi_chassis.c and ipmi_pef.c 73 * ID: 3564701 - ipmitool 1.8.12 doesn't build on big endian architectures 74 * ID: 3600907 - defined value for "Chassis may not support Force Identify" 75 * ID: 256 - ipmitool could crash when IPv6 address is returned 76 * ID: 211 - 'lib/ipmi_dcmi.c' - typo & error printed on STDOUT 77 * ID: 3612237 - If DCMI command fails, incorrect completion code is printed 78 * ID: 3608149 - ipmitool - set pointer to NULL after free() 79 * ID: 3603419 - DCMI - waste of resources 80 * ID: 3600908 - DMCI - crash in ipmi_print_sensor_info(), NULL ref 81 * ID: 3609985 - delloem : Wrong MAC returned when flex addressing is enabled 82 * ID: 113 - delloem exec file won't handle more than one command 83 * ID: 28 - delloem - clean up the code 84 * ID: 3608261 - delloem - code formatting 85 * ID: 3528247 - delloem - fix possible *int flows 86 * ID: 3600910 - delloem - code cleanup 87 * ID: 3576211 - delloem - unused variable 88 * ID: 3578022 - delloem - fix typos 89 * ID: 263 - ipmi_ek* - cleanup 90 * ID: 3308765 - ipmi_ek* - cleanup 91 * ID: 3586228 - ipmi_ek* - ipmi_ekanalyzer_usage() rework 92 * ID: 3528388 - ipmi_ek* - a typo in error message 93 * ID: 3576212 - ipmi_event - better rsp handling 94 * ID: 3607393 - ipmi_event - redundant '\n' in error message 95 * ID: 153 - ipmi_firewall - printf() used instead of lprintf() 96 * ID: 3608003 - ipmi_fru - atol() should be replaced with str2*() 97 * ID: 3600911 - ipmi_fru - fix multiple increments in args to printf 98 * ID: 3600914 - no more crash on no response. allow more send/recv loops of waiting. 99 * ID: 70 - Fixes and updates for ipmitool hpm 100 * ID: 3528308 - ipmi_hpmfwupg - possible int *flow 101 * ID: 3608762 - ipmi_hpmfwup - Fixed help messages for hpm command 102 * ID: 3607981 - ipmi_lanp - replace atoi() calls 103 * ID: 3607320 - ipmi_lanp - possible NULL reference 104 * ID: 3600926 - ipmi_lanp - code cleanup 105 * ID: 3613575 - memory leak - ipmi_password_file_read() 106 * ID: 3522740 - reading password from file is limited to 16byte passwords 107 * ID: 3613605 - ipmi_main - call free() on pointer to static data 108 * ID: 3608761 - ipmi_main - PICMG Get Device Locator was never run 109 * ID: 3577155 - ipmi_main' - memory leaks 110 * ID: 239 - typo in 'mc selftest', add details 111 * ID: 3597471 - ipmi_mc - needs a bit of re-work - rc, inv. options 112 * ID: 3597468 - ipmi_mc - print_mc_usage() prints to STDOUT 113 * ID: 3597469 - 'mc watchdog off' prints on STDERR, should be STDOUT 114 * ID: 3597470 - 'mc watchdog reset' prints on STDERR, should be STDOUT 115 * ID: 3611254 - OEM handle for Intel 82751 in SPT mode 116 * ID: 3600927 - change eval order of input param in ipmi_oem_setup() 117 * ID: 3600928 - ipmi_pef - code cleanup 118 * ID: 3592732 - ipmi_picmg.c - printf() misuse 119 * ID: 3528310 - ipmi_picmg.c - NULL reference 120 * ID: 3528347 - ipmi_raw.c - possible int *flow 121 * ID: 3587913 - Command % ipmitool raw help; returns 1 122 * Added code to support sensors on other luns (On behalf of Kontron Germany) 123 * ID: 3611912 - Add missing newlines when cvs output is specified 124 * ID: 244 - ipmi_sel - "0.0" displayed for unspecified threshold values 125 * ID: 3612371 - Typo in impi_sel debug output 126 * ID: 3016359 - ipmi_sel - Get SEL Alloc Information is incorrect 127 * ID: 3568976 - 'sel set time' behaviour is inconsistent 128 * ID: 3528371 - ipmi_sensor - possible int *flow 129 * ID: 3601265 - 'ipmitool sensor get' leaks memory 130 * ID: 3601106 - 'ipmitool sensor get NACname' output incorrect/inconsistent 131 * ID: 3608007 - ipmi_session - typo in error message 132 * ID: 101 - ipmi_sol - possible int *flow 133 * ID: 3600933 - ipmi_sol - use of deprecated bzero() 134 * ID: 3609472 - ipmi_sol - Add the instance to the SOL commands 135 * ID: 3588726 - 'ipmitool sol payload status ...;'segfaults on no rsp 136 * ID: 3522731 - ipmi_sol - ipmi_get_sol_info() returns always 0 137 * ID: 3613042 - add missing Entity IDs 138 * ID: 3611306 - ipmi_tsol - fix always fail in case of error 139 * ID: 259 - ipmi_user - memory leak 140 * ID: 260 - ipmi_user - replace atoi() call 141 * ID: 2871903 - ipmitool user priv incorrectly sets Link Auth 142 * ID: 3600960 - check the copy of password exists 143 * ID: 3609473 - Add assertion/deassertion to threshold events 144 * ID: 104 - ipmishell - possible int *flow 145 * ID: 262 - 'set' segfaults when no IPMI inf present 146 * ID: 257 ipmitool exec segfaults if invalid input given 147 * ID: 254 - Fix retry of authentication capabilities retrieval 148 * ID: 3611303 - lan - error check is missing braces 149 * ID: 253 - Fix lanplus retransmission 150 * ID: 212 - 'lib/ipmi_dcmi.c' - possible int *flow 151 * ID: 264 - incorrect array index in get_lan_param_select() 152 * ID: 269 - Fixes for configure.in for cross compilation 153 * ID: 267 - Corruption in "lan alert print" output 154 * ID: 41 - ipmi_sel_interpret() - clean up formatting, indentation 155 * ID: 242 - Incorrect DCMI Power Reading "IPMI timestamp" interpretation 156 * ID: 229 - 'lib/ipmi_ekanalyzer.c' - a typo ``Too few argument!'' 157 * ID: 266 - file descriptor leak in ipmi_fwum and ipmi_ekanalyzer 158 * ID: 99 - 'lib/ipmi_sel.c' - possible int *flow 159 * ID: 222 - 'lib/ipmi_sdr.c' - a typo 'Not Reading' -> 'No Reading' 160 * ID: 35 - Script to setup redirection of SNMP to/from BMC 161 * ID: 273 - Reduce SOL Input buffer size by SOL header size 162 163 164version 1.8.12 released 2012-08-09 165 * Added IPMB dual bridge support (no need for driver support) 166 * Enable compiler warnings and resolve all compiler warning so that 167 ipmitool compiles and links with no warning or error messages 168 * add ipmishell line to configure 169 * fail configure when no curses or readline is found 170 * support sensor bridging in free interface 171 * applied fix for issue #2865160 (AIX build) 172 * Document the ipmitool dcmi commands in the ipmitool man page 173 * Document that some commands are blocked by OpenIPMI. ID 2962306 174 * Document the -N and -R options per tracker ID 3489643 175 * fix manpage misdocumentation on cipher suite privilige configuration 176 * Add build support for Dell OEM commands 177 * Add new Dell OEM commands and update man page 178 * added hpm and fwum in man page 179 * man page update for fwum and hpm commands 180 * Added documentation for 'ime' operating mode, used to update Intel ME. 181 * add new -Y option to prompt user to enter kgkey 182 * Add DCMI module (Data Center Management Interface) 183 * fixed oem/iana data type to allow 24 bits definition 184 * Fixed AMC point-to-point record parsing in FRU 185 * Fixed detection of packing support in GCC 186 * Added packing support detection magic on all packed structures 187 in project 188 * Dell specific mac sub command is updated to support the latest 12G 189 Dell servers. Support for virtual mac is also implemented. 190 * Use consistent netfn/cmd for getsysinfo command 191 * Add Dell OEM network commands 192 * Resolve incorect Board Mfg Data due to incorrect date constant 193 * Update ipmi_fru.h to SMBIOS spec 2.6.1 - ID 2916398 194 * Support for analog readings in discrete sensors on HP platforms. 195 * Change device id mask (IPM_DEV_DEVICE_ID_REV_MASK) 0x07 for 0x0F. 196 As per in IPMI spec V2: 197 * Added PICMG clock e-keying and bused resource control identifiers 198 * Added PICMG major version (ATCA/AMC/uTCA) identifiers 199 * Correct Threshold/Discrete Sensor Display - Patch Tracker ID 3508759 200 * Sensor units now handle percentage units - ID 3014014 201 * Fixes ID 3421347 Sensor list command should use channel field from SDR 202 * Added packing directive for ARM cross compile with GCC 3.4.5, 203 otherwise the sdr structures gets padded and the pointer cast 204 result in incorrect alignement 205 * Added 'sdr fill sensors nosats' support to speed up SDR discovery 206 * Added SDR name display during discovery (with -v) 207 * Added support for sensor types - Processor related sensor 208 type 0x07, system incharectorization 0x20, Memory sensor type. 209 * Give more description for SEL which is generated for Uncorrectable 210 ECC and errors with respect to each Memory Bank,Card or DIMM. 211 The Sensor type supporting this are 0x0C and 0x10. 212 * Add more details about Version Change event (source of 213 firmware update) 214 * enhanced PICMG fru control 215 * Integrated Andy Wray's DDR3 SPD parser patch 216 * Adds function str2uint() to convert from string to uint32_t with 217 checks for valid input. 218 * Fix possible buffer overflow in buf2str() 219 * Fixes ID 3485004 - misuse of strtol() 220 * Replaces calls to strtol() with str2uchar() calls and adds error 221 messages if invalid input is given. 222 * Don't overwite the iflags bits prior to setting the boot parameters. 223 This fixes ipmitool so that 224 chassis bootdev bios clear-cmos=yes 225 will correctly clear the bios cmos. 226 * Clarify DCMI get limit activation (add if activate or not). 227 * Bug fixes for delloem lan command. This includes the support for 12G 228 Dell license and 12G LAN Specific command. 229 * delloem commands should not be executed before parsing command line. 230 * Fix stack overflow in delloem setled 231 * Fix delloem powermonitor on big-endian platforms. 232 * ipmitool delloem powermonitor command should convert data from 233 network-format to the native one, otherwise it shows garbage 234 on ppc/ppc64 platform. 235 * Add ipmi_getsysinfo command 236 * Add support for drive backplane SetLED functionality 237 * Fix for Platform Event Message incorrect Generator ID 238 * Fix fru print so that it will display FRU info from satellite 239 controllers. 240 * Add support for AMC type 17h record. 241 * Fix in fru edit. It is now possible to edit field 0 of sections 242 * New FRU get OEM record command 243 * fixed segfault for fru edit when "field id" is not supported and 244 added user feedback for string substitution(success or failure) 245 * Improvement to hpm upgrade during activation. This resolves issue 246 where activation seems to have failed because ipmitool received 247 an unsupported completion code. 248 * hpm Fixes for multi-platform support. 249 * hpm Fix for timeouts during firmware rollback. If completion code 250 is C3, wait till timeout has expired before reporting it. 251 * hpm During manual rollback, code now gets target capabilities 252 instead of using a default timeout of 60 seconds. 253 * Added firmware auxilliary bytes to hpm outputs 254 * hpm Add support for BIG Buffer (Use when -z option is used) 255 * Fix the case where ipmitool loses the iol connection during the upload 256 block process. Once IPMITool was successfully sent the first 257 byte, IPMITool will not resize the block size. 258 * Fix the problem when we try to upgrade specific component and the 259 component is already updated, 260 * updated HPM firmware agent to version 1.04 261 * Fix exit code to return zero on '-o list' or '-o help' option 262 * limit length of user name and password that can be supplied by user. 263 Password is limited to 16 bytes, resp. 20 bytes, for LAN, resp. 264 LAN+, interface. User name is limited to 16 bytes, no interface 265 limitations. ID 3184687, ID 3001519 266 * Add retry / timeout options for LAN 267 * Changed default cipher suite to 1 instead of 3 for iol20 268 * added fix for tracker ID 2849300 "Incorrect Firmware Revision" 269 * avoid reopening the interface when already opened 270 * Remove message for unsupported PEF capabilities that return valid 271 CC (80h) 272 * Added OEM byte (47) to verbose output 273 * Add option to provide a list when filling sdr repository 274 * SDR discovery speedups 275 * Added support for Dell specific sensors 276 * Fix segmentation fault on unrecognize OEM events. 277 * changed SEL timestamp formatting for 'preinit' SEL entries, allowing 278 the number of seconds to be displayed. 279 * Added sensor raw data in verbose mode. Useful for OEM sensor type. 280 * Add sensor hysteresis (positive & negative) to the following command 281 ipmitool sensor -v 282 * Fixes bug ID 3484936 - missing user input validation 283 * Add missing RMCP+ auth type strings 284 * Add new Kontron Product in ipmi_strings for product ID. Kontron 285 KTC5520/EATX Server Motherboard with integrated iBMC/KVM/VM 286 added identification support for Kontron AT8050 ATCA board 287 * Constrain setting of the username to no greater than 16 characters 288 per the IPMI specification. ID 3001519 289 * Constrain User ID between 1 and 63. ID 3519225 290 * Fixes ID 3485340 - user input not handled in 'lib/ipmi_user.c' 291 * Fixes ignorance of existing daemon PID file which results in PID being 292 overwritten. Adds proper umask() before writing PID file. 293 * applied fix for ID 2865111 (AIX build) 294 * Fix a proplem when using bridged IPMI commands on the lanplus 295 interface (-I lanplus with -b -t or -m switches) resulting in 296 "Close Session command failure". 297 * Add fix with usage of CFh (duplicate request). Usefull for 298 slow commands 299 * Fix issue with sequence number. (Speed up transfer) 300 301version 1.8.11 released 2009-02-25 302 * Fix new GCC compilation issues in regards to Packing 303 * Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded 304 for 2.4 kernel instead of ipmi_si_drv driver module 305 * New -y option added to allow specification of kg keys with 306 non-printable characters 307 * New -K option added to allow kgkey settings via environmental 308 variable IPMI_KGKEY 309 * Generic device support added for EEPROM with SDR Type 10h (gendev) 310 * Fix to lan-bridging for a double-bridging crash and to fix 311 an issue with bridging multiple concurrent requests and 312 erroneous handling of raw Send Message 313 * Lanplus fix for commands like 'sensor list' without the -t option 314 causing wrong double bridged requests of a sensor is located 315 on another satellite controller 316 * Fix lan and lanplus request list entry removal bugs 317 * Fix non-working issue when trying to send a bridge message with 318 Cipher 3 319 * Change bridge message handling to reuse command ipmi_lan_poll_recv 320 * Added PICMG 2.0 and 2.3 support 321 * Fix PICMG (ATCA) extension verification and reversal of BCD encoded 322 values for "major" and "minor" fields 323 * Add IANA support for Pigeon Point 324 * Add OEM SW/FW Record identification 325 * Fix to include I2C and LUN addresses so sensors are correctly managed 326 * Patch ID 1990560 to get readings from non-linear analog sensors 327 * Add support for SOL payload status command 328 * SOL set parameter range checking added 329 * Fixed SOL activate options usage 330 * Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967) 331 * Added retries to SOL keepalive 332 * Fixed wrong mask values for Front Panel disable/enable status 333 * Add support to access fru internal use area 334 * Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow 335 blocks of data within the FRU storage area to be write 336 protected. 337 * Fix node reporting in GUID; Tracker bug #2339675 338 * Fix watchdog use/action print strings 339 * Fix endian bug in SDR add from file; Tracker bug #2075258 340 * Fix crash when dumping SDRs in a file and there's an error 341 getting an SDR; improve algorithm for optimal packet size 342 * Fix occasional SDR dump segfault; #1793076 343 * Allow ipmitool sel delete to accept hex list entry numbers 344 * Fix SEL total space reporting. 345 * Fix for garbage sensor threshold values reported when none 346 returned. Tracker Bug #863748 347 * ipmievd change to Monitor %used in SEL buffer and log warnings when 348 the buffer is 80% and 100% full 349 350version 1.8.10 released 2008-08-08 351 * Added support for BULL IANA number. 352 * Fixed contrib build so the oem_ibm_sel_map file gets included in 353 rpm builds again. 354 * Added support for Debian packages to be built from CVS 355 * Fix for sdr and sel timestamp reporting issues 356 * Fix for discrete sensor state print routines to address state 357 bits 8-14 358 * Change ipmi_chassis_status() to non-static so it can be used 359 externally 360 * Added retries to SOL keepalive 361 * Fix to stop sensor list command from reporting a failure due 362 to missing sensor 363 * Fix bug in sdr free space reporting 364 * Add support for IANA number to vendor name conversion for many 365 vendors 366 * Fix segfault bug in lan set command 367 * Fix bug in population of raw i2c wdata buffer 368 * Fix bug in ipmb sensor reading 369 * Fix misspellings, typos, incorrect strncmp lengths, white space 370 * Update/fix printed help and usages for many commands 371 * Add and update support for all commands in ipmitool man page 372 * Fix for lanplus session re-open when the target becomes unavailable 373 following a fw upgrade activation 374 * Add support for watchdog timer shutoff, reset, and get info 375 * Add support for more ibm systems in oem_ibm_sel_map 376 * Add more JEDEC support info for DIMMs; decrease request size 377 for DIMM FRU info to 16 bytes at a time to allow more 378 DIMM FRUs to respond. 379 * Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg 380 buffer length more aggressively when no response from iol 381 * Fix HPM firmware activation via IOL; fake a timeout after IOL 382 session re-open to force get upgrade status retry; 383 Added retries on 0xD3 completion code 384 * Add support for freeipmi 0.6.0; adjust autoconf for changes 385 * Fix for oemval2str size 386 * Add support for product name resolution in mc info 387 * Fix FRU display format 388 * Added PICMG ekeying analyzer module support (ekanalyzer); 389 display point to point physical connectivity and power 390 supply information between carriers and AMC modules; 391 display matched results of ekeying match between an 392 on-carrier device and AMC module or between 2 AMC modules 393 * Fix AMC GUID display support 394 * Improved amcportstate operations 395 * Added resolution for new sensor types 396 * Fix segfault in SOL 397 * Fix bug that caused infinite loop on BMCs with empty SDRs 398 * Fix to move out Kontron OEM sensor resolution for other OEMs 399 which could lead to bad event descriptions 400 * Add new FRU edit mode thereby allowing serial numbers, etc. to be 401 changed; improvements to OEM edit mode 402 * Added SPD support for parms: channel number, max read size 403 * Add SDR support for adding SDR records from a dumped file, 404 clearing SDR, adding partial SDR records 405 * Add updates and fixes to hpmfwupg: upload block size to 32 bytes 406 for KCS, handle long response option, implement rollback 407 override, garbage output fix 408 * Add double bridge lan support , fix bridging issue 409 * Add HPM support to pre-check which components need to be skipped 410 * Fix autodetection of maximum packet size when using IPMB 411 * Add new Kontron OEM command to set the BIOS boot option sequence 412 * Add support for dual-bridge/ dual send message 413 * Add auto-detect for local IPMB address using PICMG 2.X extension 414 * Add support for HPM.1 1.0 specification compliance 415 * Fix for improper lan/lanplus addressing 416 * Added transit_channel and transit_addr to ipmi_intf struct 417 * Fix bad password assertion bug due to rakp2 HMAC not being checked 418 properly 419 * Added ability to interpret PPS shelf manager clia sel dump 420 * Corrected PICMG M7 state event definition macros 421 * Added FRU parsing enhancements 422 * Added "isol info", "isol set" and "isol activate" commands 423 to support Intel IPMI v1.5 SOL functionality. Removed 424 "isol setup" command. 425 * Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces. 426 * Fix bug in "chassis poh" command. 427 * Fix HPM.1 upgrade to apply to only given component when instructed 428 to do so 429 * Added configure auto-detection if dual bridge extension 430 is supported by OpenIPMI 431 432version 1.8.9 released 2007-03-06 433 * Added initial AMC ekey query operation support 434 * Improvements to ekeying support (PICMG 3.x only) 435 * Added initial interactive edition support for multirec; added IANA 436 verification before interpreting PICMG records. 437 * Added edit support for AMC activation "Maximum Internal Current" 438 * Fix bug generating garbage on the screen when handling GetDeviceId 439 and sol traffic occurs 440 * Added ability to map OEM sensor types to OEM description string using 441 IANA number; moved IANA number table 442 * Fix lan set access command to use value already saved within 443 parameters for PEF and authentication 444 * Fix bug in cmd ipmitool lan stats get 1 445 * Add support to allow ipmitool/ipmievd to target specific device 446 nodes on multi-BMC systems 447 * Add support for name+privilege lookup for lanplus sessions 448 * Fix time_t conversion bug for 64-bit OS 449 * Added prefix of hostname on sel ipmievd sessions 450 * Fixed FWUM Get Info 451 * Fix ipmievd fd closing bug 452 * Add set-in-progress flag support to chassis bootdev 453 * Added new chassis bootdev options 454 * Add sol payload enable/disable comman 455 * Fix SOL set errors when commit-write not supported 456 * Fix reset of session timeout for lanplus interface 457 * Fixed lan interface accessibility timeout handling 458 * Fix bug with Function Get Channel Cipher Suites command when 459 more than 1 page used. 460 * Fix missing firmware firewall top-level command 461 * Fix bug in SOL keepalive functionality 462 * Fix SOLv2 NACK and retry handling for Intel ESB2 BMC 463 * Added ipmi_sel_get_oem_sensor* APIs 464 * Added HPM.1 support 465 * Fix segfault when incorrect oem option supplied 466 * Fix bus problem with spd command 467 * Fix segfault in SOL when remote BMC does not return packet 468 * Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes 469 * Added lan packet size reduction mechanism 470 * Fix bug with sendMessage of bad length with different target 471 * Fix for big endian (PPC) architecture 472 * NetBSD fixes 473 * Fix segfault and channel problem with user priv command 474 * Add support for bus/chan on i2c raw command 475 * Add freeipmi interface support 476 * Add remote spd printing 477 * Add better detection of linux/compiler.h to config 478 * Makefile changes to fix makedistcheck, etc. 479 480version 1.8.8 481 * Fix segfaults in sensor data repository list 482 * Fix ipmievd to open interface before daemonizing 483 * Fix IPMIv1.5 authtype NONE to ignore supplied password 484 * Fix cipher suite display bug in lan print 485 * Fix typo in IPMIv2 SOL output when sending break 486 * Fix improper LUN handling with Tyan SOL 487 * Add LUN support to OpenIPMI interface 488 * Add support for Kontron OEM commands 489 * Update to Kontron Firmware Update command 490 491version 1.8.7 492 * Remove nuclear clause from license 493 * Add Sun OEM command for blades 494 * Increase argument size for raw commands in shell/exec 495 * Fix handling of LUNs for LAN interfaces 496 * Add IPMIv2 SOL loopback test 497 * Add support for IBM OEM SEL messages 498 * Disable file paranoia checks on read files by default 499 * Support IPMIv2 SOL on older Intel boxes 500 * Display message and exit if keepalive fails during SOL 501 * Add support for setting VLAN id and priority 502 * Add support for FreeBSD OpenIPMI-compatible driver 503 * Add support for IPMIv2 Firmware Firewall 504 * Fix gcc4 compile warnings 505 * Make ipmievd generate pidfile 506 * Add initscripts for ipmievd 507 508version 1.8.6 509 * Fix memory corruption when sending encrypted SOL traffic 510 * Add keepalive timer to IPMIv2 SOL sessions 511 512version 1.8.5 513 * Add support for settable SOL escape character with -e option 514 * Add support for Kg BMC key for IPMIv2 authentication with -k option 515 * Add support for Tyan IPMIv1.5 SOL with tsol command 516 * Add support for PICMG devices 517 * Add support for OEM SEL event parsing 518 * Add support for command bridging over lan and lanplus interfaces 519 * New 'chassis selftest' command 520 * Many bufxies and patches from contributors 521 522version 1.8.3 523 * Add support for 'sel readraw' and 'sel writeraw' commands. 524 * Add support for entering NetFn as a string for RAW commands. 525 * Add support for appending distro tag to integrated RPM builds. 526 * Fix LAN parameter printing to handle Invalid Data Field response 527 without errors. 528 * Add 5ms delay to IPMIv2 SOL retry packets 529 * IPMIv2 interface will now correctly set session privilege level 530 to requested level after session is opened. 531 532version 1.8.2 (released May 18 2005) 533 * Fix FRU reading for large (>255 bytes) areas. 534 * Overhaul to ipmievd to support SEL polling in addition to OpenIPMI. 535 * Fix LAN parameter segfault when no Ciphers supported by BMC. 536 * Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus). 537 * Separate option parsing code from main ipmitool source file. 538 * Add raw I2C support with IPMI Master Read-Write command. 539 * Add support for new 'sdr elist' extended output format. 540 * Add support for listing sensors by type with 'sdr type' command. 541 * Add support for new 'sel elist' extended output format that 542 cross-references events with sensors. 543 * Add support for sending dynamically generated platform events 544 based on existing sensor information. 545 * New '-S' argument to read local SDR cache created with 'sdr dump'. 546 * Updated manpage for ipmitool and ipmievd. 547 548version 1.8.1 549 * ipmievd installs in /usr/sbin 550 551version 1.8.0 552 * Fix IPMIv2.0 issues 553 * Fix chassis boot parameter support 554 * Add support for linear sensors 555 556version 1.7.1 557 * Update bmc plugin to work with new Solaris bmc driver (new ioctl 558 for interface detection and new STREAMS message-based interface) 559 560version 1.7.0 561 * Propogate errors correctly so exit status will be useful 562 * More consistent display of errors including completion code text 563 * Errors and debug is send to stderr now 564 * New "sel get" command that will print details about SEL entry 565 and corresponding SDR records as well as FRUs via entity association 566 * Improved event generator, now supports reading events from text file 567 * New "-o oemtype" option for specifying OEM boards 568 exsting types are "supermicro" and "intelwv2" 569 * New PEF subsystem from Tim Murphy at Dell 570 * New "bmc" plugin for Solaris 10 x86 571 * Many bugfixes and contributed patches 572 573version 1.6.2 574 * Support for Supermicro BMC OEM authentication method 575 576version 1.6.1 577 * Fix minor problem with LAN parameter setting 578 579version 1.6.0 580 * Add a README file 581 * Add Solaris x86 interface plugin 582 * Add support for building Solaris packages 583 * Fix segfault when doing "sel list" (from Matthew Braithwaite) 584 * Fix "chassis identify" on some BMCs (from ebrower@sourceforge) 585 * Add command "bmc info" and related output (from ebrower@sourceforge) 586 * Add support for IPMIv2 and Serial-over-LAN from Jeremy at Newisys 587 * Add support for building RPMs as non-root user 588 * Add new "shell" and "exec" commands 589 * Lots of other contributed patches 590 591version 1.5.9 592 * Add ability to get a particular sensor by name 593 * Add ability to set a particular sensor threshold 594 * Add support for displaying V2 channel authentication levels 595 * Add README for rrdtool scripts in contrib directory 596 * Improve lan interface retry handling 597 * Support prompting for password or reading from environment 598 * Move chaninfo command into channel subcommand 599 * Fix reservation ID handling when two sessions open to BMC 600 * Fix reading of large FRU data 601 * Add configure option for changing binary to ipmiadm for Solaris 602 * Fix compile problem on Solaris 8 603 604version 1.5.8 605 * Enable static compilation of interfaces 606 * Fix types to be 64-bit safe 607 * Fix compilation problems on Solaris 608 * Fix multiple big-endian problems for Solaris/SPARC 609 * Fix channel access to save settings to NVRAM 610 * Set channel privilege limit to ADMIN during "access on" 611 * Enable gratuitous ARP in bmcautoconf.sh 612 * Add support for Linux kernel panic messages in SEL output 613 * Add support for type 3 SDR records 614 615version 1.5.7 616 * Add IPMIv1.5 eratta fixes 617 * Additions to FRU printing and FRU multirecords 618 * Better handling of SDR printing 619 * Contrib scripts for creating rrdtool graphs 620 621version 1.5.6 622 * Fix SEL event decoding for generic events 623 * Handle empty SEL gracefully when doing "sel list" 624 * Fix sdr handling of sensors that do not return a reading 625 * Fix for CSV display of sensor readings/units from Fredrik �hrn 626 627version 1.5.5 628 * Add -U option for setting LAN username 629 * Fix -v usage for plugin interfaces 630 631version 1.5.4 632 * Put interface plugin API into library 633 * Fix ipmievd 634 635version 1.5.3 636 * Add -g option to work with grizzly bmc 637 638version 1.5.2 639 * Add support for setting gratuitous arp interval 640 641version 1.5.1 642 * Better SEL support 643 * Fix display bug in SDR list 644 645version 1.5.0 646 * More robust UDP packet handling 647 * Add Intel IMB driver support 648 * Use autoconf/automake/libtool 649 650