1 /* 2 * (c) 2011 Graf-Syteco, Matthias Weisser 3 * <weisserm@arcor.de> 4 * 5 * Configuation settings for the zmx25 board 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #define CONFIG_ARM926EJS /* arm926ejs CPU core */ 30 #define CONFIG_MX25 31 #define CONFIG_MX25_CLK32 32768 /* OSC32K frequency */ 32 #define CONFIG_SYS_HZ 1000 33 #define CONFIG_SYS_TEXT_BASE 0xA0000000 34 35 #define CONFIG_MACH_TYPE MACH_TYPE_ZMX25 36 /* 37 * Environment settings 38 */ 39 #define CONFIG_EXTRA_ENV_SETTINGS \ 40 "gs_fast_boot=setenv bootdelay 5\0" \ 41 "gs_slow_boot=setenv bootdelay 10\0" \ 42 "bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \ 43 "fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \ 44 "bootm 0x81000000; bootelf 0x81000000\0" 45 46 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 47 #define CONFIG_SETUP_MEMORY_TAGS 48 #define CONFIG_INITRD_TAG 49 #define BOARD_LATE_INIT 50 51 /* 52 * Compressions 53 */ 54 #define CONFIG_LZO 55 56 /* 57 * Hardware drivers 58 */ 59 60 /* 61 * GPIO 62 */ 63 #define CONFIG_MXC_GPIO 64 65 /* 66 * Serial 67 */ 68 #define CONFIG_MXC_UART 69 #define CONFIG_SYS_MX25_UART2 70 #define CONFIG_CONS_INDEX 1 /* use UART2 for console */ 71 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 72 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 73 74 /* 75 * Ethernet 76 */ 77 #define CONFIG_FEC_MXC 78 #define CONFIG_FEC_MXC_PHYADDR 0x00 79 #define CONFIG_MII 80 #define CONFIG_NET_MULTI 81 82 /* 83 * BOOTP options 84 */ 85 #define CONFIG_BOOTP_BOOTFILESIZE 86 #define CONFIG_BOOTP_BOOTPATH 87 #define CONFIG_BOOTP_GATEWAY 88 #define CONFIG_BOOTP_HOSTNAME 89 90 /* 91 * Command line configuration. 92 */ 93 #include <config_cmd_default.h> 94 #define CONFIG_CMD_NET 95 #define CONFIG_CMD_CACHE 96 97 #define CONFIG_SYS_64BIT_VSPRINTF 98 99 /* 100 * Additional command 101 */ 102 #define CONFIG_CMD_DHCP 103 #define CONFIG_CMD_PING 104 #define CONFIG_CMD_ELF 105 #define CONFIG_CMD_FAT 106 #define CONFIG_CMD_USB 107 108 #define CONFIG_SYS_HUSH_PARSER 109 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 110 111 /* 112 * USB 113 */ 114 #ifdef CONFIG_CMD_USB 115 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 116 #define CONFIG_USB_EHCI_MXC 117 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 118 #define CONFIG_MXC_USB_PORT 2 119 #define CONFIG_MXC_USB_PORTSC 0xC0000000 120 #define CONFIG_MXC_USB_FLAGS 0 121 #define CONFIG_EHCI_IS_TDI 122 #define CONFIG_USB_STORAGE 123 #define CONFIG_DOS_PARTITION 124 #define CONFIG_SUPPORT_VFAT 125 #endif /* CONFIG_CMD_USB */ 126 127 /* SDRAM */ 128 #define CONFIG_NR_DRAM_BANKS 1 129 #define PHYS_SDRAM 0x80000000 /* start address of LPDDRRAM */ 130 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ 131 132 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 133 #define CONFIG_SYS_INIT_SP_ADDR 0x78020000 /* end of internal SRAM */ 134 135 /* 136 * FLASH and environment organization 137 */ 138 #define CONFIG_SYS_FLASH_BASE 0xA0000000 139 #define CONFIG_SYS_MAX_FLASH_BANKS 1 140 #define CONFIG_SYS_MAX_FLASH_SECT 256 141 142 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) 143 #define CONFIG_ENV_IS_IN_FLASH 1 144 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 145 #define CONFIG_ENV_SIZE (128 * 1024) 146 147 /* 148 * CFI FLASH driver setup 149 */ 150 #define CONFIG_SYS_FLASH_CFI 151 #define CONFIG_FLASH_CFI_DRIVER 152 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* ~10x faster */ 153 154 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE 155 156 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024)) 157 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) 158 159 #define CONFIG_SYS_PROMPT "zmx25> " 160 #define CONFIG_SYS_CBSIZE 256 161 #define CONFIG_SYS_MAXARGS 16 162 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 163 sizeof(CONFIG_SYS_PROMPT) + 16) 164 #define CONFIG_SYS_LONGHELP 165 #define CONFIG_CMDLINE_EDITING 166 167 #define CONFIG_PREBOOT "" 168 169 #define CONFIG_BOOTDELAY 5 170 #define CONFIG_AUTOBOOT_KEYED 171 #define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay 172 #define CONFIG_AUTOBOOT_DELAY_STR "delaygs" 173 #define CONFIG_AUTOBOOT_STOP_STR "stopgs" 174 175 /* 176 * Size of malloc() pool 177 */ 178 #define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) 179 #define CONFIG_STACKSIZE (32*1024) /* regular stack */ 180 181 #endif /* __CONFIG_H */ 182