1 /* 2 * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * This file contains the configuration parameters for the VCT board 9 * family: 10 * 11 * vct_premium 12 * vct_premium_small 13 * vct_premium_onenand 14 * vct_premium_onenand_small 15 * vct_platinum 16 * vct_platinum_small 17 * vct_platinum_onenand 18 * vct_platinum_onenand_small 19 * vct_platinumavc 20 * vct_platinumavc_small 21 * vct_platinumavc_onenand 22 * vct_platinumavc_onenand_small 23 */ 24 25 #ifndef __CONFIG_H 26 #define __CONFIG_H 27 28 #define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ 29 #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) 30 31 #define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */ 32 33 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 34 #define CONFIG_SYS_MONITOR_LEN (256 << 10) 35 #define CONFIG_SYS_MALLOC_LEN (1 << 20) 36 #define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10) 37 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 38 39 #if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND) 40 #define CONFIG_VCT_NOR 41 #endif 42 43 /* 44 * UART 45 */ 46 #ifdef CONFIG_VCT_PLATINUMAVC 47 #define UART_1_BASE 0xBDC30000 48 #else 49 #define UART_1_BASE 0xBF89C000 50 #endif 51 52 #define CONFIG_SYS_NS16550_SERIAL 53 #define CONFIG_SYS_NS16550_REG_SIZE -4 54 #define CONFIG_SYS_NS16550_COM1 UART_1_BASE 55 #define CONFIG_SYS_NS16550_CLK 921600 56 57 /* 58 * SDRAM 59 */ 60 #define CONFIG_SYS_SDRAM_BASE 0x80000000 61 #define CONFIG_SYS_MBYTES_SDRAM 128 62 #define CONFIG_SYS_MEMTEST_START 0x80200000 63 #define CONFIG_SYS_MEMTEST_END 0x80400000 64 #define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ 65 66 #if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) 67 #define CONFIG_NET_RETRY_COUNT 20 68 #endif 69 70 /* 71 * Commands 72 */ 73 #if defined(CONFIG_CMD_USB) 74 75 /* 76 * USB/EHCI 77 */ 78 #define CONFIG_USB_EHCI_VCT /* on VCT platform */ 79 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 80 #define CONFIG_EHCI_DESC_BIG_ENDIAN 81 #define CONFIG_EHCI_IS_TDI 82 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */ 83 #endif /* CONFIG_CMD_USB */ 84 85 /* 86 * BOOTP options 87 */ 88 #define CONFIG_BOOTP_BOOTFILESIZE 89 90 /* 91 * Miscellaneous configurable options 92 */ 93 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 94 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 95 96 /* 97 * FLASH and environment organization 98 */ 99 #if defined(CONFIG_VCT_NOR) 100 #define CONFIG_FLASH_NOT_MEM_MAPPED 101 102 /* 103 * We need special accessor functions for the CFI FLASH driver. This 104 * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option. 105 */ 106 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 107 108 /* 109 * For the non-memory-mapped NOR FLASH, we need to define the 110 * NOR FLASH area. This can't be detected via the addr2info() 111 * function, since we check for flash access in the very early 112 * U-Boot code, before the NOR FLASH is detected. 113 */ 114 #define CONFIG_FLASH_BASE 0xb0000000 115 #define CONFIG_FLASH_END 0xbfffffff 116 117 /* 118 * CFI driver settings 119 */ 120 #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ 121 #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ 122 #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ 123 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ 124 125 #define CONFIG_SYS_FLASH_BASE 0xb0000000 126 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } 127 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 128 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 129 130 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 131 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 132 133 #ifdef CONFIG_ENV_IS_IN_FLASH 134 #define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ 135 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 136 #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ 137 138 /* Address and size of Redundant Environment Sector */ 139 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) 140 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 141 #endif /* CONFIG_ENV_IS_IN_FLASH */ 142 #endif /* CONFIG_VCT_NOR */ 143 144 #if defined(CONFIG_VCT_ONENAND) 145 #define CONFIG_USE_ONENAND_BOARD_INIT 146 #define CONFIG_SYS_ONENAND_BASE 0x00000000 /* this is not real address */ 147 #define CONFIG_SYS_FLASH_BASE 0x00000000 148 #define CONFIG_ENV_ADDR (128 << 10) /* after compr. U-Boot image */ 149 #define CONFIG_ENV_SIZE (128 << 10) /* erase size */ 150 #endif /* CONFIG_VCT_ONENAND */ 151 152 /* 153 * I2C/EEPROM 154 */ 155 #define CONFIG_SYS_I2C 156 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 157 #define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */ 158 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x7f 159 160 /* 161 * Software (bit-bang) I2C driver configuration 162 */ 163 #define CONFIG_SYS_GPIO_I2C_SCL 11 164 #define CONFIG_SYS_GPIO_I2C_SDA 10 165 166 #ifndef __ASSEMBLY__ 167 int vct_gpio_dir(int pin, int dir); 168 void vct_gpio_set(int pin, int val); 169 int vct_gpio_get(int pin); 170 #endif 171 172 #define I2C_INIT vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1) 173 #define I2C_ACTIVE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1) 174 #define I2C_TRISTATE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0) 175 #define I2C_READ vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA) 176 #define I2C_SDA(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit) 177 #define I2C_SCL(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit) 178 #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ 179 180 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 181 /* CAT24WC32 */ 182 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ 183 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ 184 /* 32 byte page write mode using*/ 185 /* last 5 bits of the address */ 186 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ 187 188 #define CONFIG_BOOTCOMMAND "run test3" 189 190 /* 191 * UBI configuration 192 */ 193 #if defined(CONFIG_VCT_ONENAND) 194 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 195 #define CONFIG_MTD_PARTITIONS 196 #endif 197 198 /* 199 * We need a small, stripped down image to fit into the first 128k OneNAND 200 * erase block (gzipped). This image only needs basic commands for FLASH 201 * (NOR/OneNAND) usage and Linux kernel booting. 202 */ 203 #if defined(CONFIG_VCT_SMALL_IMAGE) 204 #undef CONFIG_SYS_I2C_SOFT 205 #undef CONFIG_SOURCE 206 #undef CONFIG_TIMESTAMP 207 #endif /* CONFIG_VCT_SMALL_IMAGE */ 208 209 #endif /* __CONFIG_H */ 210