1 #ifndef __CONFIG_H 2 #define __CONFIG_H 3 4 #define CONFIG_CPU_SH7751 1 5 #define CONFIG_CPU_SH_TYPE_R 1 6 #define CONFIG_R2DPLUS 1 7 #define __LITTLE_ENDIAN__ 1 8 9 #define CONFIG_DISPLAY_BOARDINFO 10 11 /* 12 * Command line configuration. 13 */ 14 #define CONFIG_CMD_PCI 15 #define CONFIG_CMD_IDE 16 #define CONFIG_DOS_PARTITION 17 #define CONFIG_CMD_SH_ZIMAGEBOOT 18 19 /* SCIF */ 20 #define CONFIG_SCIF_CONSOLE 1 21 #define CONFIG_BAUDRATE 115200 22 #define CONFIG_CONS_SCIF1 1 23 24 #define CONFIG_BOOTARGS "console=ttySC0,115200" 25 #define CONFIG_ENV_OVERWRITE 1 26 27 /* SDRAM */ 28 #define CONFIG_SYS_SDRAM_BASE 0x8C000000 29 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 30 31 #define CONFIG_SYS_TEXT_BASE 0x8FE00000 32 #define CONFIG_SYS_LONGHELP 33 #define CONFIG_SYS_CBSIZE 256 34 #define CONFIG_SYS_PBSIZE 256 35 #define CONFIG_SYS_MAXARGS 16 36 #define CONFIG_SYS_BARGSIZE 512 37 38 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) 39 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) 40 41 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024) 42 /* Address of u-boot image in Flash */ 43 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) 44 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 45 /* Size of DRAM reserved for malloc() use */ 46 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 47 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 48 49 /* 50 * NOR Flash ( Spantion S29GL256P ) 51 */ 52 #define CONFIG_SYS_FLASH_CFI 53 #define CONFIG_FLASH_CFI_DRIVER 54 #define CONFIG_SYS_FLASH_BASE (0xA0000000) 55 #define CONFIG_SYS_MAX_FLASH_BANKS (1) 56 #define CONFIG_SYS_MAX_FLASH_SECT 256 57 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } 58 59 #define CONFIG_ENV_IS_IN_FLASH 60 #define CONFIG_ENV_SECT_SIZE 0x40000 61 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 62 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 63 64 /* 65 * SuperH Clock setting 66 */ 67 #define CONFIG_SYS_CLK_FREQ 60000000 68 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 69 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 70 #define CONFIG_SYS_TMU_CLK_DIV 4 71 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ 72 73 /* 74 * IDE support 75 */ 76 #define CONFIG_IDE_RESET 1 77 #define CONFIG_SYS_PIO_MODE 1 78 #define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ 79 #define CONFIG_SYS_IDE_MAXDEVICE 1 80 #define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 81 #define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ 82 #define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ 83 #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ 84 #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ 85 #define CONFIG_IDE_SWAP_IO 86 87 /* 88 * SuperH PCI Bridge Configration 89 */ 90 #define CONFIG_SH4_PCI 91 #define CONFIG_SH7751_PCI 92 #define CONFIG_PCI_SCAN_SHOW 1 93 #define __mem_pci 94 95 #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ 96 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS 97 #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ 98 #define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ 99 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS 100 #define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ 101 #define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE 102 #define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE 103 #define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE 104 105 #endif /* __CONFIG_H */ 106