1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian.pop@leadtechdesign.com> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * Ilko Iliev <www.ronetix.at> 6 * 7 * Configuation settings for the RONETIX PM9263 board. 8 * 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 /* ARM asynchronous clock */ 32 #define CONFIG_DISPLAY_CPUINFO 33 #define CONFIG_DISPLAY_BOARDINFO 34 35 #define MASTER_PLL_DIV 6 36 #define MASTER_PLL_MUL 65 37 #define MAIN_PLL_DIV 2 /* 2 or 4 */ 38 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 39 40 #define CONFIG_SYS_HZ 1000 41 42 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ 43 #define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/ 44 #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ 45 #define CONFIG_ARCH_CPU_INIT 46 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ 47 48 /* clocks */ 49 #define CONFIG_SYS_MOR_VAL \ 50 (AT91_PMC_MOR_MOSCEN | \ 51 (255 << 8)) /* Main Oscillator Start-up Time */ 52 #define CONFIG_SYS_PLLAR_VAL \ 53 (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ 54 AT91_PMC_PLLXR_OUT(3) | \ 55 AT91_PMC_PLLXR_PLLCOUNT(0x3f) | /* PLL Counter */\ 56 (2 << 28) | /* PLL Clock Frequency Range */ \ 57 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) 58 59 #if (MAIN_PLL_DIV == 2) 60 /* PCK/2 = MCK Master Clock from PLLA */ 61 #define CONFIG_SYS_MCKR1_VAL \ 62 (AT91_PMC_MCKR_CSS_SLOW | \ 63 AT91_PMC_MCKR_PRES_1 | \ 64 AT91_PMC_MCKR_MDIV_2) 65 /* PCK/2 = MCK Master Clock from PLLA */ 66 #define CONFIG_SYS_MCKR2_VAL \ 67 (AT91_PMC_MCKR_CSS_PLLA | \ 68 AT91_PMC_MCKR_PRES_1 | \ 69 AT91_PMC_MCKR_MDIV_2) 70 #else 71 /* PCK/4 = MCK Master Clock from PLLA */ 72 #define CONFIG_SYS_MCKR1_VAL \ 73 (AT91_PMC_MCKR_CSS_SLOW | \ 74 AT91_PMC_MCKR_PRES_1 | \ 75 AT91_PMC_MCKR_MDIV_4) 76 /* PCK/4 = MCK Master Clock from PLLA */ 77 #define CONFIG_SYS_MCKR2_VAL \ 78 (AT91_PMC_MCKR_CSS_PLLA | \ 79 AT91_PMC_MCKR_PRES_1 | \ 80 AT91_PMC_MCKR_MDIV_4) 81 #endif 82 /* define PDC[31:16] as DATA[31:16] */ 83 #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 84 /* no pull-up for D[31:16] */ 85 #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 86 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ 87 #define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ 88 (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ 89 AT91_MATRIX_CSA_EBI_CS1A) 90 91 /* SDRAM */ 92 /* SDRAMC_MR Mode register */ 93 #define CONFIG_SYS_SDRC_MR_VAL1 0 94 /* SDRAMC_TR - Refresh Timer register */ 95 #define CONFIG_SYS_SDRC_TR_VAL1 0x3AA 96 /* SDRAMC_CR - Configuration register*/ 97 #define CONFIG_SYS_SDRC_CR_VAL \ 98 (AT91_SDRAMC_NC_9 | \ 99 AT91_SDRAMC_NR_13 | \ 100 AT91_SDRAMC_NB_4 | \ 101 AT91_SDRAMC_CAS_2 | \ 102 AT91_SDRAMC_DBW_32 | \ 103 (2 << 8) | /* tWR - Write Recovery Delay */ \ 104 (7 << 12) | /* tRC - Row Cycle Delay */ \ 105 (2 << 16) | /* tRP - Row Precharge Delay */ \ 106 (2 << 20) | /* tRCD - Row to Column Delay */ \ 107 (5 << 24) | /* tRAS - Active to Precharge Delay */ \ 108 (8 << 28)) /* tXSR - Exit Self Refresh to Active Delay */ 109 110 /* Memory Device Register -> SDRAM */ 111 #define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM 112 #define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE 113 #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ 114 #define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH 115 #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ 116 #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ 117 #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ 118 #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ 119 #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ 120 #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ 121 #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ 122 #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ 123 #define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR 124 #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ 125 #define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL 126 #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ 127 #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ 128 #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ 129 130 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ 131 #define CONFIG_SYS_SMC0_SETUP0_VAL \ 132 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ 133 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) 134 #define CONFIG_SYS_SMC0_PULSE0_VAL \ 135 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ 136 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) 137 #define CONFIG_SYS_SMC0_CYCLE0_VAL \ 138 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) 139 #define CONFIG_SYS_SMC0_MODE0_VAL \ 140 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ 141 AT91_SMC_MODE_DBW_16 | \ 142 AT91_SMC_MODE_TDF | \ 143 AT91_SMC_MODE_TDF_CYCLE(6)) 144 145 /* user reset enable */ 146 #define CONFIG_SYS_RSTC_RMR_VAL \ 147 (AT91_RSTC_KEY | \ 148 AT91_RSTC_CR_PROCRST | \ 149 AT91_RSTC_MR_ERSTL(1) | \ 150 AT91_RSTC_MR_ERSTL(2)) 151 152 /* Disable Watchdog */ 153 #define CONFIG_SYS_WDTC_WDMR_VAL \ 154 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ 155 AT91_WDT_MR_WDV(0xfff) | \ 156 AT91_WDT_MR_WDDIS | \ 157 AT91_WDT_MR_WDD(0xfff)) 158 159 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 160 #define CONFIG_SETUP_MEMORY_TAGS 1 161 #define CONFIG_INITRD_TAG 1 162 163 #undef CONFIG_SKIP_LOWLEVEL_INIT 164 #define CONFIG_USER_LOWLEVEL_INIT 1 165 166 /* 167 * Hardware drivers 168 */ 169 #define CONFIG_AT91_GPIO 1 170 #define CONFIG_ATMEL_USART 1 171 #undef CONFIG_USART0 172 #undef CONFIG_USART1 173 #undef CONFIG_USART2 174 #define CONFIG_USART3 1 /* USART 3 is DBGU */ 175 176 /* LCD */ 177 #define CONFIG_LCD 1 178 #define LCD_BPP LCD_COLOR8 179 #define CONFIG_LCD_LOGO 1 180 #undef LCD_TEST_PATTERN 181 #define CONFIG_LCD_INFO 1 182 #define CONFIG_LCD_INFO_BELOW_LOGO 1 183 #define CONFIG_SYS_WHITE_ON_BLACK 1 184 #define CONFIG_ATMEL_LCD 1 185 #define CONFIG_ATMEL_LCD_BGR555 1 186 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 187 188 #define CONFIG_LCD_IN_PSRAM 1 189 190 /* LED */ 191 #define CONFIG_AT91_LED 192 #define CONFIG_RED_LED AT91_PIO_PORTB, 7 /* this is the power led */ 193 #define CONFIG_GREEN_LED AT91_PIO_PORTB, 8 /* this is the user1 led */ 194 195 #define CONFIG_BOOTDELAY 3 196 197 /* 198 * BOOTP options 199 */ 200 #define CONFIG_BOOTP_BOOTFILESIZE 1 201 #define CONFIG_BOOTP_BOOTPATH 1 202 #define CONFIG_BOOTP_GATEWAY 1 203 #define CONFIG_BOOTP_HOSTNAME 1 204 205 /* 206 * Command line configuration. 207 */ 208 #include <config_cmd_default.h> 209 #undef CONFIG_CMD_BDI 210 #undef CONFIG_CMD_IMI 211 #undef CONFIG_CMD_FPGA 212 #undef CONFIG_CMD_LOADS 213 #undef CONFIG_CMD_IMLS 214 215 #define CONFIG_CMD_PING 1 216 #define CONFIG_CMD_DHCP 1 217 #define CONFIG_CMD_NAND 1 218 #define CONFIG_CMD_USB 1 219 220 /* SDRAM */ 221 #define CONFIG_NR_DRAM_BANKS 1 222 #define PHYS_SDRAM 0x20000000 223 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ 224 225 /* DataFlash */ 226 #define CONFIG_ATMEL_DATAFLASH_SPI 227 #define CONFIG_HAS_DATAFLASH 1 228 #define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) 229 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 230 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ 231 #define AT91_SPI_CLK 15000000 232 #define DATAFLASH_TCSS (0x1a << 16) 233 #define DATAFLASH_TCHS (0x1 << 24) 234 235 /* NOR flash, if populated */ 236 #define CONFIG_SYS_FLASH_CFI 1 237 #define CONFIG_FLASH_CFI_DRIVER 1 238 #define PHYS_FLASH_1 0x10000000 239 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 240 #define CONFIG_SYS_MAX_FLASH_SECT 256 241 #define CONFIG_SYS_MAX_FLASH_BANKS 1 242 243 /* NAND flash */ 244 #ifdef CONFIG_CMD_NAND 245 #define CONFIG_NAND_ATMEL 246 #define CONFIG_SYS_NAND_MAX_CHIPS 1 247 #define CONFIG_SYS_MAX_NAND_DEVICE 1 248 #define CONFIG_SYS_NAND_BASE 0x40000000 249 #define CONFIG_SYS_NAND_DBW_8 1 250 /* our ALE is AD21 */ 251 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 252 /* our CLE is AD22 */ 253 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 254 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 255 #define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 30 256 257 #endif 258 259 #define CONFIG_CMD_JFFS2 1 260 #define CONFIG_JFFS2_CMDLINE 1 261 #define CONFIG_JFFS2_NAND 1 262 #define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ 263 #define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ 264 #define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/ 265 266 /* PSRAM */ 267 #define PHYS_PSRAM 0x70000000 268 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ 269 /* Slave EBI1, PSRAM connected */ 270 #define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \ 271 AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \ 272 AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \ 273 AT91_MATRIX_SCFG_SLOT_CYCLE(255)) 274 275 /* Ethernet */ 276 #define CONFIG_MACB 1 277 #define CONFIG_RMII 1 278 #define CONFIG_NET_MULTI 1 279 #define CONFIG_NET_RETRY_COUNT 20 280 #define CONFIG_RESET_PHY_R 1 281 282 /* USB */ 283 #define CONFIG_USB_ATMEL 284 #define CONFIG_USB_OHCI_NEW 1 285 #define CONFIG_DOS_PARTITION 1 286 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 287 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ 288 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" 289 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 290 #define CONFIG_USB_STORAGE 1 291 292 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 293 294 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 295 #define CONFIG_SYS_MEMTEST_END 0x23e00000 296 297 #define CONFIG_SYS_USE_FLASH 1 298 #undef CONFIG_SYS_USE_DATAFLASH 299 #undef CONFIG_SYS_USE_NANDFLASH 300 301 #ifdef CONFIG_SYS_USE_DATAFLASH 302 303 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 304 #define CONFIG_ENV_IS_IN_DATAFLASH 305 #define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) 306 #define CONFIG_ENV_OFFSET 0x4200 307 #define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) 308 #define CONFIG_ENV_SIZE 0x4200 309 #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" 310 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 311 "root=/dev/mtdblock0 " \ 312 "mtdparts=atmel_nand:-(root) "\ 313 "rw rootfstype=jffs2" 314 315 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ 316 317 /* bootstrap + u-boot + env + linux in nandflash */ 318 #define CONFIG_ENV_IS_IN_NAND 319 #define CONFIG_ENV_OFFSET 0x60000 320 #define CONFIG_ENV_OFFSET_REDUND 0x80000 321 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 322 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" 323 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 324 "root=/dev/mtdblock5 " \ 325 "mtdparts=atmel_nand:" \ 326 "128k(bootstrap)ro," \ 327 "256k(uboot)ro," \ 328 "128k(env1)ro," \ 329 "128k(env2)ro," \ 330 "2M(linux)," \ 331 "-(root) " \ 332 "rw rootfstype=jffs2" 333 334 #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ 335 336 #define CONFIG_ENV_IS_IN_FLASH 1 337 #define CONFIG_ENV_OFFSET 0x40000 338 #define CONFIG_ENV_SECT_SIZE 0x10000 339 #define CONFIG_ENV_SIZE 0x10000 340 #define CONFIG_ENV_OVERWRITE 1 341 342 /* JFFS Partition offset set */ 343 #define CONFIG_SYS_JFFS2_FIRST_BANK 0 344 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 345 346 /* 512k reserved for u-boot */ 347 #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 348 349 #define CONFIG_BOOTCOMMAND "run flashboot" 350 #define CONFIG_ROOTPATH /ronetix/rootfs 351 #define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" 352 353 #define CONFIG_CON_ROT "fbcon=rotate:3 " 354 #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\ 355 CONFIG_CON_ROT 356 357 #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" 358 #define MTDPARTS_DEFAULT \ 359 "mtdparts=physmap-flash.0:" \ 360 "256k(u-boot)ro," \ 361 "64k(u-boot-env)ro," \ 362 "1408k(kernel)," \ 363 "-(rootfs);" \ 364 "nand:-(nand)" 365 366 #define CONFIG_EXTRA_ENV_SETTINGS \ 367 "mtdids=" MTDIDS_DEFAULT "\0" \ 368 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 369 "partition=nand0,0\0" \ 370 "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ 371 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 372 CONFIG_CON_ROT \ 373 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ 374 "addip=setenv bootargs $(bootargs) " \ 375 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ 376 ":$(hostname):eth0:off\0" \ 377 "ramboot=tftpboot 0x22000000 vmImage;" \ 378 "run ramargs;run addip;bootm 22000000\0" \ 379 "nfsboot=tftpboot 0x22000000 vmImage;" \ 380 "run nfsargs;run addip;bootm 22000000\0" \ 381 "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ 382 "" 383 384 #else 385 #error "Undefined memory device" 386 #endif 387 388 #define CONFIG_BAUDRATE 115200 389 #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } 390 391 #define CONFIG_SYS_PROMPT "u-boot-pm9263> " 392 #define CONFIG_SYS_CBSIZE 256 393 #define CONFIG_SYS_MAXARGS 16 394 #define CONFIG_SYS_PBSIZE \ 395 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 396 #define CONFIG_SYS_LONGHELP 1 397 #define CONFIG_CMDLINE_EDITING 1 398 399 /* 400 * Size of malloc() pool 401 */ 402 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) 403 404 #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ 405 406 #ifdef CONFIG_USE_IRQ 407 #error CONFIG_USE_IRQ not supported 408 #endif 409 410 #endif 411