1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * QorIQ RDB boards configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #if defined(CONFIG_TARGET_P1020MBG) 14 #define CONFIG_BOARDNAME "P1020MBG-PC" 15 #define CONFIG_VSC7385_ENET 16 #define CONFIG_SLIC 17 #define __SW_BOOT_MASK 0x03 18 #define __SW_BOOT_NOR 0xe4 19 #define __SW_BOOT_SD 0x54 20 #define CONFIG_SYS_L2_SIZE (256 << 10) 21 #endif 22 23 #if defined(CONFIG_TARGET_P1020UTM) 24 #define CONFIG_BOARDNAME "P1020UTM-PC" 25 #define __SW_BOOT_MASK 0x03 26 #define __SW_BOOT_NOR 0xe0 27 #define __SW_BOOT_SD 0x50 28 #define CONFIG_SYS_L2_SIZE (256 << 10) 29 #endif 30 31 #if defined(CONFIG_TARGET_P1020RDB_PC) 32 #define CONFIG_BOARDNAME "P1020RDB-PC" 33 #define CONFIG_NAND_FSL_ELBC 34 #define CONFIG_VSC7385_ENET 35 #define CONFIG_SLIC 36 #define __SW_BOOT_MASK 0x03 37 #define __SW_BOOT_NOR 0x5c 38 #define __SW_BOOT_SPI 0x1c 39 #define __SW_BOOT_SD 0x9c 40 #define __SW_BOOT_NAND 0xec 41 #define __SW_BOOT_PCIE 0x6c 42 #define CONFIG_SYS_L2_SIZE (256 << 10) 43 #endif 44 45 /* 46 * P1020RDB-PD board has user selectable switches for evaluating different 47 * frequency and boot options for the P1020 device. The table that 48 * follow describe the available options. The front six binary number was in 49 * accordance with SW3[1:6]. 50 * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off 51 * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off 52 * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off 53 * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off 54 * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off 55 * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off 56 * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off 57 */ 58 #if defined(CONFIG_TARGET_P1020RDB_PD) 59 #define CONFIG_BOARDNAME "P1020RDB-PD" 60 #define CONFIG_NAND_FSL_ELBC 61 #define CONFIG_VSC7385_ENET 62 #define CONFIG_SLIC 63 #define __SW_BOOT_MASK 0x03 64 #define __SW_BOOT_NOR 0x64 65 #define __SW_BOOT_SPI 0x34 66 #define __SW_BOOT_SD 0x24 67 #define __SW_BOOT_NAND 0x44 68 #define __SW_BOOT_PCIE 0x74 69 #define CONFIG_SYS_L2_SIZE (256 << 10) 70 /* 71 * Dynamic MTD Partition support with mtdparts 72 */ 73 #define CONFIG_MTD_DEVICE 74 #define CONFIG_MTD_PARTITIONS 75 #define CONFIG_CMD_MTDPARTS 76 #define CONFIG_FLASH_CFI_MTD 77 #define MTDIDS_DEFAULT "nor0=ec000000.nor" 78 #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \ 79 "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)" 80 #endif 81 82 #if defined(CONFIG_TARGET_P1021RDB) 83 #define CONFIG_BOARDNAME "P1021RDB-PC" 84 #define CONFIG_NAND_FSL_ELBC 85 #define CONFIG_QE 86 #define CONFIG_VSC7385_ENET 87 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 88 addresses in the LBC */ 89 #define __SW_BOOT_MASK 0x03 90 #define __SW_BOOT_NOR 0x5c 91 #define __SW_BOOT_SPI 0x1c 92 #define __SW_BOOT_SD 0x9c 93 #define __SW_BOOT_NAND 0xec 94 #define __SW_BOOT_PCIE 0x6c 95 #define CONFIG_SYS_L2_SIZE (256 << 10) 96 /* 97 * Dynamic MTD Partition support with mtdparts 98 */ 99 #define CONFIG_MTD_DEVICE 100 #define CONFIG_MTD_PARTITIONS 101 #define CONFIG_CMD_MTDPARTS 102 #define CONFIG_FLASH_CFI_MTD 103 #ifdef CONFIG_PHYS_64BIT 104 #define MTDIDS_DEFAULT "nor0=fef000000.nor" 105 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ 106 "256k(dtb),4608k(kernel),9728k(fs)," \ 107 "256k(qe-ucode-firmware),1280k(u-boot)" 108 #else 109 #define MTDIDS_DEFAULT "nor0=ef000000.nor" 110 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ 111 "256k(dtb),4608k(kernel),9728k(fs)," \ 112 "256k(qe-ucode-firmware),1280k(u-boot)" 113 #endif 114 #endif 115 116 #if defined(CONFIG_TARGET_P1024RDB) 117 #define CONFIG_BOARDNAME "P1024RDB" 118 #define CONFIG_NAND_FSL_ELBC 119 #define CONFIG_SLIC 120 #define __SW_BOOT_MASK 0xf3 121 #define __SW_BOOT_NOR 0x00 122 #define __SW_BOOT_SPI 0x08 123 #define __SW_BOOT_SD 0x04 124 #define __SW_BOOT_NAND 0x0c 125 #define CONFIG_SYS_L2_SIZE (256 << 10) 126 #endif 127 128 #if defined(CONFIG_TARGET_P1025RDB) 129 #define CONFIG_BOARDNAME "P1025RDB" 130 #define CONFIG_NAND_FSL_ELBC 131 #define CONFIG_QE 132 #define CONFIG_SLIC 133 134 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 135 addresses in the LBC */ 136 #define __SW_BOOT_MASK 0xf3 137 #define __SW_BOOT_NOR 0x00 138 #define __SW_BOOT_SPI 0x08 139 #define __SW_BOOT_SD 0x04 140 #define __SW_BOOT_NAND 0x0c 141 #define CONFIG_SYS_L2_SIZE (256 << 10) 142 #endif 143 144 #if defined(CONFIG_TARGET_P2020RDB) 145 #define CONFIG_BOARDNAME "P2020RDB-PC" 146 #define CONFIG_NAND_FSL_ELBC 147 #define CONFIG_VSC7385_ENET 148 #define __SW_BOOT_MASK 0x03 149 #define __SW_BOOT_NOR 0xc8 150 #define __SW_BOOT_SPI 0x28 151 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 152 #define __SW_BOOT_NAND 0xe8 153 #define __SW_BOOT_PCIE 0xa8 154 #define CONFIG_SYS_L2_SIZE (512 << 10) 155 /* 156 * Dynamic MTD Partition support with mtdparts 157 */ 158 #define CONFIG_MTD_DEVICE 159 #define CONFIG_MTD_PARTITIONS 160 #define CONFIG_CMD_MTDPARTS 161 #define CONFIG_FLASH_CFI_MTD 162 #ifdef CONFIG_PHYS_64BIT 163 #define MTDIDS_DEFAULT "nor0=fef000000.nor" 164 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ 165 "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" 166 #else 167 #define MTDIDS_DEFAULT "nor0=ef000000.nor" 168 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ 169 "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" 170 #endif 171 #endif 172 173 #ifdef CONFIG_SDCARD 174 #define CONFIG_SPL_MMC_MINIMAL 175 #define CONFIG_SPL_FLUSH_IMAGE 176 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 177 #define CONFIG_SYS_TEXT_BASE 0x11001000 178 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 179 #define CONFIG_SPL_PAD_TO 0x20000 180 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 181 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 182 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 183 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 184 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 185 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 186 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 187 #define CONFIG_SPL_MMC_BOOT 188 #ifdef CONFIG_SPL_BUILD 189 #define CONFIG_SPL_COMMON_INIT_DDR 190 #endif 191 #endif 192 193 #ifdef CONFIG_SPIFLASH 194 #define CONFIG_SPL_SPI_FLASH_MINIMAL 195 #define CONFIG_SPL_FLUSH_IMAGE 196 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 197 #define CONFIG_SYS_TEXT_BASE 0x11001000 198 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 199 #define CONFIG_SPL_PAD_TO 0x20000 200 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 201 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 202 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 203 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 204 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 205 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 206 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 207 #define CONFIG_SPL_SPI_BOOT 208 #ifdef CONFIG_SPL_BUILD 209 #define CONFIG_SPL_COMMON_INIT_DDR 210 #endif 211 #endif 212 213 #ifdef CONFIG_NAND 214 #ifdef CONFIG_TPL_BUILD 215 #define CONFIG_SPL_NAND_BOOT 216 #define CONFIG_SPL_FLUSH_IMAGE 217 #define CONFIG_SPL_NAND_INIT 218 #define CONFIG_SPL_COMMON_INIT_DDR 219 #define CONFIG_SPL_MAX_SIZE (128 << 10) 220 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 221 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 222 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 223 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 224 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 225 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 226 #elif defined(CONFIG_SPL_BUILD) 227 #define CONFIG_SPL_INIT_MINIMAL 228 #define CONFIG_SPL_FLUSH_IMAGE 229 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 230 #define CONFIG_SPL_TEXT_BASE 0xff800000 231 #define CONFIG_SPL_MAX_SIZE 4096 232 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 233 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 234 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 235 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 236 #endif /* not CONFIG_TPL_BUILD */ 237 238 #define CONFIG_SPL_PAD_TO 0x20000 239 #define CONFIG_TPL_PAD_TO 0x20000 240 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 241 #define CONFIG_SYS_TEXT_BASE 0x11001000 242 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 243 #endif 244 245 #ifndef CONFIG_SYS_TEXT_BASE 246 #define CONFIG_SYS_TEXT_BASE 0xeff40000 247 #endif 248 249 #ifndef CONFIG_RESET_VECTOR_ADDRESS 250 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 251 #endif 252 253 #ifndef CONFIG_SYS_MONITOR_BASE 254 #ifdef CONFIG_SPL_BUILD 255 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 256 #else 257 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 258 #endif 259 #endif 260 261 #define CONFIG_MP 262 263 #define CONFIG_FSL_ELBC 264 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 265 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 266 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 267 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 268 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 269 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 270 271 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 272 #define CONFIG_ENV_OVERWRITE 273 274 #define CONFIG_CMD_SATA 275 #define CONFIG_SATA_SIL 276 #define CONFIG_SYS_SATA_MAX_DEVICE 2 277 #define CONFIG_LIBATA 278 #define CONFIG_LBA48 279 280 #if defined(CONFIG_TARGET_P2020RDB) 281 #define CONFIG_SYS_CLK_FREQ 100000000 282 #else 283 #define CONFIG_SYS_CLK_FREQ 66666666 284 #endif 285 #define CONFIG_DDR_CLK_FREQ 66666666 286 287 #define CONFIG_HWCONFIG 288 /* 289 * These can be toggled for performance analysis, otherwise use default. 290 */ 291 #define CONFIG_L2_CACHE 292 #define CONFIG_BTB 293 294 #define CONFIG_ENABLE_36BIT_PHYS 295 296 #ifdef CONFIG_PHYS_64BIT 297 #define CONFIG_ADDR_MAP 1 298 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 299 #endif 300 301 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 302 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 303 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 304 305 #define CONFIG_SYS_CCSRBAR 0xffe00000 306 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 307 308 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 309 SPL code*/ 310 #ifdef CONFIG_SPL_BUILD 311 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 312 #endif 313 314 /* DDR Setup */ 315 #define CONFIG_SYS_DDR_RAW_TIMING 316 #define CONFIG_DDR_SPD 317 #define CONFIG_SYS_SPD_BUS_NUM 1 318 #define SPD_EEPROM_ADDRESS 0x52 319 #undef CONFIG_FSL_DDR_INTERACTIVE 320 321 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) 322 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 323 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 324 #else 325 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 326 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 327 #endif 328 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 329 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 330 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 331 332 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 333 334 /* Default settings for DDR3 */ 335 #ifndef CONFIG_TARGET_P2020RDB 336 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 337 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 338 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 339 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 340 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 341 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 342 343 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 344 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 345 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 346 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 347 348 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 349 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 350 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 351 #define CONFIG_SYS_DDR_RCW_1 0x00000000 352 #define CONFIG_SYS_DDR_RCW_2 0x00000000 353 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 354 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 355 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 356 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 357 358 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 359 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 360 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 361 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 362 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 363 #define CONFIG_SYS_DDR_MODE_1 0x40461520 364 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 365 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 366 #endif 367 368 #undef CONFIG_CLOCKS_IN_MHZ 369 370 /* 371 * Memory map 372 * 373 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 374 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 375 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 376 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable 377 * (early boot only) 378 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 379 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 380 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 381 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 382 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 383 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 384 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 385 */ 386 387 /* 388 * Local Bus Definitions 389 */ 390 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) 391 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 392 #define CONFIG_SYS_FLASH_BASE 0xec000000 393 #elif defined(CONFIG_TARGET_P1020UTM) 394 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 395 #define CONFIG_SYS_FLASH_BASE 0xee000000 396 #else 397 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 398 #define CONFIG_SYS_FLASH_BASE 0xef000000 399 #endif 400 401 #ifdef CONFIG_PHYS_64BIT 402 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 403 #else 404 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 405 #endif 406 407 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 408 | BR_PS_16 | BR_V) 409 410 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 411 412 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 413 #define CONFIG_SYS_FLASH_QUIET_TEST 414 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 415 416 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 417 418 #undef CONFIG_SYS_FLASH_CHECKSUM 419 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 420 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 421 422 #define CONFIG_FLASH_CFI_DRIVER 423 #define CONFIG_SYS_FLASH_CFI 424 #define CONFIG_SYS_FLASH_EMPTY_INFO 425 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 426 427 /* Nand Flash */ 428 #ifdef CONFIG_NAND_FSL_ELBC 429 #define CONFIG_SYS_NAND_BASE 0xff800000 430 #ifdef CONFIG_PHYS_64BIT 431 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 432 #else 433 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 434 #endif 435 436 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 437 #define CONFIG_SYS_MAX_NAND_DEVICE 1 438 #define CONFIG_CMD_NAND 439 #if defined(CONFIG_TARGET_P1020RDB_PD) 440 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 441 #else 442 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 443 #endif 444 445 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 446 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 447 | BR_PS_8 /* Port Size = 8 bit */ \ 448 | BR_MS_FCM /* MSEL = FCM */ \ 449 | BR_V) /* valid */ 450 #if defined(CONFIG_TARGET_P1020RDB_PD) 451 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ 452 | OR_FCM_PGS /* Large Page*/ \ 453 | OR_FCM_CSCT \ 454 | OR_FCM_CST \ 455 | OR_FCM_CHT \ 456 | OR_FCM_SCY_1 \ 457 | OR_FCM_TRLX \ 458 | OR_FCM_EHTR) 459 #else 460 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 461 | OR_FCM_CSCT \ 462 | OR_FCM_CST \ 463 | OR_FCM_CHT \ 464 | OR_FCM_SCY_1 \ 465 | OR_FCM_TRLX \ 466 | OR_FCM_EHTR) 467 #endif 468 #endif /* CONFIG_NAND_FSL_ELBC */ 469 470 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 471 472 #define CONFIG_SYS_INIT_RAM_LOCK 473 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 474 #ifdef CONFIG_PHYS_64BIT 475 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 477 /* The assembler doesn't like typecast */ 478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 479 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 480 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 481 #else 482 /* Initial L1 address */ 483 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 486 #endif 487 /* Size of used area in RAM */ 488 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 489 490 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 491 GENERATED_GBL_DATA_SIZE) 492 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 493 494 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 495 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 496 497 #define CONFIG_SYS_CPLD_BASE 0xffa00000 498 #ifdef CONFIG_PHYS_64BIT 499 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 500 #else 501 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 502 #endif 503 /* CPLD config size: 1Mb */ 504 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 505 BR_PS_8 | BR_V) 506 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 507 508 #define CONFIG_SYS_PMC_BASE 0xff980000 509 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 510 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 511 BR_PS_8 | BR_V) 512 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 513 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 514 OR_GPCM_EAD) 515 516 #ifdef CONFIG_NAND 517 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 518 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 519 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 520 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 521 #else 522 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 523 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 524 #ifdef CONFIG_NAND_FSL_ELBC 525 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 526 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 527 #endif 528 #endif 529 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 530 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 531 532 /* Vsc7385 switch */ 533 #ifdef CONFIG_VSC7385_ENET 534 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 535 536 #ifdef CONFIG_PHYS_64BIT 537 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 538 #else 539 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 540 #endif 541 542 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 543 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 544 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 545 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 546 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 547 548 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 549 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 550 551 /* The size of the VSC7385 firmware image */ 552 #define CONFIG_VSC7385_IMAGE_SIZE 8192 553 #endif 554 555 /* 556 * Config the L2 Cache as L2 SRAM 557 */ 558 #if defined(CONFIG_SPL_BUILD) 559 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 560 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 561 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 562 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 563 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 564 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 565 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 566 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 567 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 568 #if defined(CONFIG_TARGET_P2020RDB) 569 #define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) 570 #else 571 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 572 #endif 573 #elif defined(CONFIG_NAND) 574 #ifdef CONFIG_TPL_BUILD 575 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 576 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 577 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 578 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 579 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 580 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 581 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 582 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 583 #else 584 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 585 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 586 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 587 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 588 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 589 #endif /* CONFIG_TPL_BUILD */ 590 #endif 591 #endif 592 593 /* Serial Port - controlled on board with jumper J8 594 * open - index 2 595 * shorted - index 1 596 */ 597 #define CONFIG_CONS_INDEX 1 598 #undef CONFIG_SERIAL_SOFTWARE_FIFO 599 #define CONFIG_SYS_NS16550_SERIAL 600 #define CONFIG_SYS_NS16550_REG_SIZE 1 601 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 602 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 603 #define CONFIG_NS16550_MIN_FUNCTIONS 604 #endif 605 606 #define CONFIG_SYS_BAUDRATE_TABLE \ 607 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 608 609 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 610 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 611 612 /* I2C */ 613 #define CONFIG_SYS_I2C 614 #define CONFIG_SYS_I2C_FSL 615 #define CONFIG_SYS_FSL_I2C_SPEED 400000 616 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 617 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 618 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 619 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 620 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 621 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 622 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 623 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 624 625 /* 626 * I2C2 EEPROM 627 */ 628 #undef CONFIG_ID_EEPROM 629 630 #define CONFIG_RTC_PT7C4338 631 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 632 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 633 634 /* enable read and write access to EEPROM */ 635 #define CONFIG_CMD_EEPROM 636 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 637 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 638 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 639 640 /* 641 * eSPI - Enhanced SPI 642 */ 643 #define CONFIG_HARD_SPI 644 645 #if defined(CONFIG_SPI_FLASH) 646 #define CONFIG_SF_DEFAULT_SPEED 10000000 647 #define CONFIG_SF_DEFAULT_MODE 0 648 #endif 649 650 #if defined(CONFIG_PCI) 651 /* 652 * General PCI 653 * Memory space is mapped 1-1, but I/O space must start from 0. 654 */ 655 656 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 657 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 658 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 659 #ifdef CONFIG_PHYS_64BIT 660 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 661 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 662 #else 663 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 664 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 665 #endif 666 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 667 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 668 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 669 #ifdef CONFIG_PHYS_64BIT 670 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 671 #else 672 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 673 #endif 674 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 675 676 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 677 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 678 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 679 #ifdef CONFIG_PHYS_64BIT 680 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 681 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 682 #else 683 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 684 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 685 #endif 686 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 687 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 688 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 689 #ifdef CONFIG_PHYS_64BIT 690 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 691 #else 692 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 693 #endif 694 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 695 696 #define CONFIG_CMD_PCI 697 698 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 699 #endif /* CONFIG_PCI */ 700 701 #if defined(CONFIG_TSEC_ENET) 702 #define CONFIG_MII /* MII PHY management */ 703 #define CONFIG_TSEC1 704 #define CONFIG_TSEC1_NAME "eTSEC1" 705 #define CONFIG_TSEC2 706 #define CONFIG_TSEC2_NAME "eTSEC2" 707 #define CONFIG_TSEC3 708 #define CONFIG_TSEC3_NAME "eTSEC3" 709 710 #define TSEC1_PHY_ADDR 2 711 #define TSEC2_PHY_ADDR 0 712 #define TSEC3_PHY_ADDR 1 713 714 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 715 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 716 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 717 718 #define TSEC1_PHYIDX 0 719 #define TSEC2_PHYIDX 0 720 #define TSEC3_PHYIDX 0 721 722 #define CONFIG_ETHPRIME "eTSEC1" 723 724 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 725 726 #define CONFIG_HAS_ETH0 727 #define CONFIG_HAS_ETH1 728 #define CONFIG_HAS_ETH2 729 #endif /* CONFIG_TSEC_ENET */ 730 731 #ifdef CONFIG_QE 732 /* QE microcode/firmware address */ 733 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 734 #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 735 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 736 #endif /* CONFIG_QE */ 737 738 #ifdef CONFIG_TARGET_P1025RDB 739 /* 740 * QE UEC ethernet configuration 741 */ 742 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 743 744 #undef CONFIG_UEC_ETH 745 #define CONFIG_PHY_MODE_NEED_CHANGE 746 747 #define CONFIG_UEC_ETH1 /* ETH1 */ 748 #define CONFIG_HAS_ETH0 749 750 #ifdef CONFIG_UEC_ETH1 751 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 752 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 753 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 754 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 755 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 756 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 757 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 758 #endif /* CONFIG_UEC_ETH1 */ 759 760 #define CONFIG_UEC_ETH5 /* ETH5 */ 761 #define CONFIG_HAS_ETH1 762 763 #ifdef CONFIG_UEC_ETH5 764 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 765 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 766 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 767 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 768 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 769 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 770 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 771 #endif /* CONFIG_UEC_ETH5 */ 772 #endif /* CONFIG_TARGET_P1025RDB */ 773 774 /* 775 * Environment 776 */ 777 #ifdef CONFIG_SPIFLASH 778 #define CONFIG_ENV_IS_IN_SPI_FLASH 779 #define CONFIG_ENV_SPI_BUS 0 780 #define CONFIG_ENV_SPI_CS 0 781 #define CONFIG_ENV_SPI_MAX_HZ 10000000 782 #define CONFIG_ENV_SPI_MODE 0 783 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 784 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 785 #define CONFIG_ENV_SECT_SIZE 0x10000 786 #elif defined(CONFIG_SDCARD) 787 #define CONFIG_ENV_IS_IN_MMC 788 #define CONFIG_FSL_FIXED_MMC_LOCATION 789 #define CONFIG_ENV_SIZE 0x2000 790 #define CONFIG_SYS_MMC_ENV_DEV 0 791 #elif defined(CONFIG_NAND) 792 #ifdef CONFIG_TPL_BUILD 793 #define CONFIG_ENV_SIZE 0x2000 794 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 795 #else 796 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 797 #endif 798 #define CONFIG_ENV_IS_IN_NAND 799 #define CONFIG_ENV_OFFSET (1024 * 1024) 800 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 801 #elif defined(CONFIG_SYS_RAMBOOT) 802 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 803 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 804 #define CONFIG_ENV_SIZE 0x2000 805 #else 806 #define CONFIG_ENV_IS_IN_FLASH 807 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 808 #define CONFIG_ENV_SIZE 0x2000 809 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 810 #endif 811 812 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 813 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 814 815 /* 816 * Command line configuration. 817 */ 818 #define CONFIG_CMD_IRQ 819 #define CONFIG_CMD_DATE 820 #define CONFIG_CMD_REGINFO 821 822 /* 823 * USB 824 */ 825 #define CONFIG_HAS_FSL_DR_USB 826 827 #if defined(CONFIG_HAS_FSL_DR_USB) 828 #define CONFIG_USB_EHCI 829 830 #ifdef CONFIG_USB_EHCI 831 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 832 #define CONFIG_USB_EHCI_FSL 833 #endif 834 #endif 835 836 #if defined(CONFIG_TARGET_P1020RDB_PD) 837 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 838 #endif 839 840 #ifdef CONFIG_MMC 841 #define CONFIG_FSL_ESDHC 842 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 843 #define CONFIG_GENERIC_MMC 844 #endif 845 846 #undef CONFIG_WATCHDOG /* watchdog disabled */ 847 848 /* 849 * Miscellaneous configurable options 850 */ 851 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 852 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 853 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 854 #if defined(CONFIG_CMD_KGDB) 855 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 856 #else 857 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 858 #endif 859 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 860 /* Print Buffer Size */ 861 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 862 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 863 864 /* 865 * For booting Linux, the board info and command line data 866 * have to be in the first 64 MB of memory, since this is 867 * the maximum mapped by the Linux kernel during initialization. 868 */ 869 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 870 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 871 872 #if defined(CONFIG_CMD_KGDB) 873 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 874 #endif 875 876 /* 877 * Environment Configuration 878 */ 879 #define CONFIG_HOSTNAME unknown 880 #define CONFIG_ROOTPATH "/opt/nfsroot" 881 #define CONFIG_BOOTFILE "uImage" 882 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 883 884 /* default location for tftp and bootm */ 885 #define CONFIG_LOADADDR 1000000 886 887 #define CONFIG_BOOTARGS /* the boot command will set bootargs */ 888 889 #define CONFIG_BAUDRATE 115200 890 891 #ifdef __SW_BOOT_NOR 892 #define __NOR_RST_CMD \ 893 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 894 i2c mw 18 3 __SW_BOOT_MASK 1; reset 895 #endif 896 #ifdef __SW_BOOT_SPI 897 #define __SPI_RST_CMD \ 898 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 899 i2c mw 18 3 __SW_BOOT_MASK 1; reset 900 #endif 901 #ifdef __SW_BOOT_SD 902 #define __SD_RST_CMD \ 903 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 904 i2c mw 18 3 __SW_BOOT_MASK 1; reset 905 #endif 906 #ifdef __SW_BOOT_NAND 907 #define __NAND_RST_CMD \ 908 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 909 i2c mw 18 3 __SW_BOOT_MASK 1; reset 910 #endif 911 #ifdef __SW_BOOT_PCIE 912 #define __PCIE_RST_CMD \ 913 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 914 i2c mw 18 3 __SW_BOOT_MASK 1; reset 915 #endif 916 917 #define CONFIG_EXTRA_ENV_SETTINGS \ 918 "netdev=eth0\0" \ 919 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 920 "loadaddr=1000000\0" \ 921 "bootfile=uImage\0" \ 922 "tftpflash=tftpboot $loadaddr $uboot; " \ 923 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 924 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 925 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 926 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 927 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 928 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 929 "consoledev=ttyS0\0" \ 930 "ramdiskaddr=2000000\0" \ 931 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 932 "fdtaddr=1e00000\0" \ 933 "bdev=sda1\0" \ 934 "jffs2nor=mtdblock3\0" \ 935 "norbootaddr=ef080000\0" \ 936 "norfdtaddr=ef040000\0" \ 937 "jffs2nand=mtdblock9\0" \ 938 "nandbootaddr=100000\0" \ 939 "nandfdtaddr=80000\0" \ 940 "ramdisk_size=120000\0" \ 941 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 942 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 943 __stringify(__NOR_RST_CMD)"\0" \ 944 __stringify(__SPI_RST_CMD)"\0" \ 945 __stringify(__SD_RST_CMD)"\0" \ 946 __stringify(__NAND_RST_CMD)"\0" \ 947 __stringify(__PCIE_RST_CMD)"\0" 948 949 #define CONFIG_NFSBOOTCOMMAND \ 950 "setenv bootargs root=/dev/nfs rw " \ 951 "nfsroot=$serverip:$rootpath " \ 952 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 953 "console=$consoledev,$baudrate $othbootargs;" \ 954 "tftp $loadaddr $bootfile;" \ 955 "tftp $fdtaddr $fdtfile;" \ 956 "bootm $loadaddr - $fdtaddr" 957 958 #define CONFIG_HDBOOT \ 959 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 960 "console=$consoledev,$baudrate $othbootargs;" \ 961 "usb start;" \ 962 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 963 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 964 "bootm $loadaddr - $fdtaddr" 965 966 #define CONFIG_USB_FAT_BOOT \ 967 "setenv bootargs root=/dev/ram rw " \ 968 "console=$consoledev,$baudrate $othbootargs " \ 969 "ramdisk_size=$ramdisk_size;" \ 970 "usb start;" \ 971 "fatload usb 0:2 $loadaddr $bootfile;" \ 972 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 973 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 974 "bootm $loadaddr $ramdiskaddr $fdtaddr" 975 976 #define CONFIG_USB_EXT2_BOOT \ 977 "setenv bootargs root=/dev/ram rw " \ 978 "console=$consoledev,$baudrate $othbootargs " \ 979 "ramdisk_size=$ramdisk_size;" \ 980 "usb start;" \ 981 "ext2load usb 0:4 $loadaddr $bootfile;" \ 982 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 983 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 984 "bootm $loadaddr $ramdiskaddr $fdtaddr" 985 986 #define CONFIG_NORBOOT \ 987 "setenv bootargs root=/dev/$jffs2nor rw " \ 988 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 989 "bootm $norbootaddr - $norfdtaddr" 990 991 #define CONFIG_RAMBOOTCOMMAND \ 992 "setenv bootargs root=/dev/ram rw " \ 993 "console=$consoledev,$baudrate $othbootargs " \ 994 "ramdisk_size=$ramdisk_size;" \ 995 "tftp $ramdiskaddr $ramdiskfile;" \ 996 "tftp $loadaddr $bootfile;" \ 997 "tftp $fdtaddr $fdtfile;" \ 998 "bootm $loadaddr $ramdiskaddr $fdtaddr" 999 1000 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 1001 1002 #endif /* __CONFIG_H */ 1003