1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * QorIQ RDB boards configuration file 25 */ 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_36BIT 30 #define CONFIG_PHYS_64BIT 31 #endif 32 33 #if defined(CONFIG_P1020MBG) 34 #define CONFIG_BOARDNAME "P1020MBG-PC" 35 #define CONFIG_P1020 36 #define CONFIG_VSC7385_ENET 37 #define CONFIG_SLIC 38 #define __SW_BOOT_MASK 0x03 39 #define __SW_BOOT_NOR 0xe4 40 #define __SW_BOOT_SD 0x54 41 #define CONFIG_SYS_L2_SIZE (256 << 10) 42 #endif 43 44 #if defined(CONFIG_P1020UTM) 45 #define CONFIG_BOARDNAME "P1020UTM-PC" 46 #define CONFIG_P1020 47 #define __SW_BOOT_MASK 0x03 48 #define __SW_BOOT_NOR 0xe0 49 #define __SW_BOOT_SD 0x50 50 #define CONFIG_SYS_L2_SIZE (256 << 10) 51 #endif 52 53 #if defined(CONFIG_P1020RDB) 54 #define CONFIG_BOARDNAME "P1020RDB-PC" 55 #define CONFIG_NAND_FSL_ELBC 56 #define CONFIG_P1020 57 #define CONFIG_SPI_FLASH 58 #define CONFIG_VSC7385_ENET 59 #define CONFIG_SLIC 60 #define __SW_BOOT_MASK 0x03 61 #define __SW_BOOT_NOR 0x5c 62 #define __SW_BOOT_SPI 0x1c 63 #define __SW_BOOT_SD 0x9c 64 #define __SW_BOOT_NAND 0xec 65 #define __SW_BOOT_PCIE 0x6c 66 #define CONFIG_SYS_L2_SIZE (256 << 10) 67 #endif 68 69 #if defined(CONFIG_P1021RDB) 70 #define CONFIG_BOARDNAME "P1021RDB-PC" 71 #define CONFIG_NAND_FSL_ELBC 72 #define CONFIG_P1021 73 #define CONFIG_QE 74 #define CONFIG_SPI_FLASH 75 #define CONFIG_VSC7385_ENET 76 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 77 addresses in the LBC */ 78 #define __SW_BOOT_MASK 0x03 79 #define __SW_BOOT_NOR 0x5c 80 #define __SW_BOOT_SPI 0x1c 81 #define __SW_BOOT_SD 0x9c 82 #define __SW_BOOT_NAND 0xec 83 #define __SW_BOOT_PCIE 0x6c 84 #define CONFIG_SYS_L2_SIZE (256 << 10) 85 #endif 86 87 #if defined(CONFIG_P1024RDB) 88 #define CONFIG_BOARDNAME "P1024RDB" 89 #define CONFIG_NAND_FSL_ELBC 90 #define CONFIG_P1024 91 #define CONFIG_SLIC 92 #define CONFIG_SPI_FLASH 93 #define __SW_BOOT_MASK 0xf3 94 #define __SW_BOOT_NOR 0x00 95 #define __SW_BOOT_SPI 0x08 96 #define __SW_BOOT_SD 0x04 97 #define __SW_BOOT_NAND 0x0c 98 #define CONFIG_SYS_L2_SIZE (256 << 10) 99 #endif 100 101 #if defined(CONFIG_P1025RDB) 102 #define CONFIG_BOARDNAME "P1025RDB" 103 #define CONFIG_NAND_FSL_ELBC 104 #define CONFIG_P1025 105 #define CONFIG_QE 106 #define CONFIG_SLIC 107 #define CONFIG_SPI_FLASH 108 109 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 110 addresses in the LBC */ 111 #define __SW_BOOT_MASK 0xf3 112 #define __SW_BOOT_NOR 0x00 113 #define __SW_BOOT_SPI 0x08 114 #define __SW_BOOT_SD 0x04 115 #define __SW_BOOT_NAND 0x0c 116 #define CONFIG_SYS_L2_SIZE (256 << 10) 117 #endif 118 119 #if defined(CONFIG_P2020RDB) 120 #define CONFIG_BOARDNAME "P2020RDB-PCA" 121 #define CONFIG_NAND_FSL_ELBC 122 #define CONFIG_P2020 123 #define CONFIG_SPI_FLASH 124 #define CONFIG_VSC7385_ENET 125 #define __SW_BOOT_MASK 0x03 126 #define __SW_BOOT_NOR 0xc8 127 #define __SW_BOOT_SPI 0x28 128 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 129 #define __SW_BOOT_NAND 0xe8 130 #define __SW_BOOT_PCIE 0xa8 131 #define CONFIG_SYS_L2_SIZE (512 << 10) 132 #endif 133 134 #if CONFIG_SYS_L2_SIZE >= (512 << 10) 135 /* must be 32-bit */ 136 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 137 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 138 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 139 #endif 140 141 #ifdef CONFIG_SDCARD 142 #define CONFIG_RAMBOOT_SDCARD 143 #define CONFIG_SYS_RAMBOOT 144 #define CONFIG_SYS_EXTRA_ENV_RELOC 145 #define CONFIG_SYS_TEXT_BASE 0x11000000 146 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 147 #endif 148 149 #ifdef CONFIG_SPIFLASH 150 #define CONFIG_RAMBOOT_SPIFLASH 151 #define CONFIG_SYS_RAMBOOT 152 #define CONFIG_SYS_EXTRA_ENV_RELOC 153 #define CONFIG_SYS_TEXT_BASE 0x11000000 154 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 155 #endif 156 157 #ifdef CONFIG_NAND 158 #define CONFIG_SPL 159 #define CONFIG_SPL_INIT_MINIMAL 160 #define CONFIG_SPL_SERIAL_SUPPORT 161 #define CONFIG_SPL_NAND_SUPPORT 162 #define CONFIG_SPL_NAND_MINIMAL 163 #define CONFIG_SPL_FLUSH_IMAGE 164 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 165 166 #define CONFIG_SPL_TEXT_BASE 0xfffff000 167 #define CONFIG_SPL_MAX_SIZE 4096 168 169 #ifdef CONFIG_SYS_INIT_L2_ADDR 170 /* We multiply CONFIG_SPL_MAX_SIZE by two to leave some room for BSS. */ 171 #define CONFIG_SYS_TEXT_BASE 0xf8f82000 172 #define CONFIG_SPL_RELOC_TEXT_BASE \ 173 (CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2) 174 #define CONFIG_SPL_RELOC_STACK \ 175 (CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2) 176 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) 177 #define CONFIG_SYS_NAND_U_BOOT_START \ 178 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SPL_MAX_SIZE) 179 #else 180 #define CONFIG_SYS_TEXT_BASE 0x00201000 181 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 182 #define CONFIG_SPL_RELOC_STACK 0x00100000 183 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 184 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 185 #endif 186 187 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) 188 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 189 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 190 #endif 191 192 #ifndef CONFIG_SYS_TEXT_BASE 193 #define CONFIG_SYS_TEXT_BASE 0xeff80000 194 #endif 195 196 #ifndef CONFIG_RESET_VECTOR_ADDRESS 197 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 198 #endif 199 200 #ifndef CONFIG_SYS_MONITOR_BASE 201 #ifdef CONFIG_SPL_BUILD 202 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 203 #else 204 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 205 #endif 206 #endif 207 208 /* High Level Configuration Options */ 209 #define CONFIG_BOOKE 210 #define CONFIG_E500 211 #define CONFIG_MPC85xx 212 213 #define CONFIG_MP 214 215 #define CONFIG_FSL_ELBC 216 #define CONFIG_PCI 217 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 218 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 219 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 220 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 221 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 222 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 223 224 #define CONFIG_FSL_LAW 225 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 226 #define CONFIG_ENV_OVERWRITE 227 228 #define CONFIG_CMD_SATA 229 #define CONFIG_SATA_SIL 230 #define CONFIG_SYS_SATA_MAX_DEVICE 2 231 #define CONFIG_LIBATA 232 #define CONFIG_LBA48 233 234 #if defined(CONFIG_P2020RDB) 235 #define CONFIG_SYS_CLK_FREQ 100000000 236 #else 237 #define CONFIG_SYS_CLK_FREQ 66666666 238 #endif 239 #define CONFIG_DDR_CLK_FREQ 66666666 240 241 #define CONFIG_HWCONFIG 242 /* 243 * These can be toggled for performance analysis, otherwise use default. 244 */ 245 #define CONFIG_L2_CACHE 246 #define CONFIG_BTB 247 248 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 249 250 #define CONFIG_ENABLE_36BIT_PHYS 251 252 #ifdef CONFIG_PHYS_64BIT 253 #define CONFIG_ADDR_MAP 1 254 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 255 #endif 256 257 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 258 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 259 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 260 261 #define CONFIG_SYS_CCSRBAR 0xffe00000 262 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 263 264 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 265 SPL code*/ 266 #ifdef CONFIG_SPL_BUILD 267 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 268 #endif 269 270 /* DDR Setup */ 271 #define CONFIG_FSL_DDR3 272 #define CONFIG_SYS_DDR_RAW_TIMING 273 #define CONFIG_DDR_SPD 274 #define CONFIG_SYS_SPD_BUS_NUM 1 275 #define SPD_EEPROM_ADDRESS 0x52 276 #undef CONFIG_FSL_DDR_INTERACTIVE 277 278 #ifdef CONFIG_P1020MBG 279 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 280 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 281 #else 282 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 283 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 284 #endif 285 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 286 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 287 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 288 289 #define CONFIG_NUM_DDR_CONTROLLERS 1 290 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 291 292 /* Default settings for DDR3 */ 293 #ifndef CONFIG_P2020RDB 294 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 295 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 296 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 297 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 298 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 299 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 300 301 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 302 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 303 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 304 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 305 306 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 307 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 308 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 309 #define CONFIG_SYS_DDR_RCW_1 0x00000000 310 #define CONFIG_SYS_DDR_RCW_2 0x00000000 311 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 312 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 313 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 314 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 315 316 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 317 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 318 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 319 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 320 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 321 #define CONFIG_SYS_DDR_MODE_1 0x40461520 322 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 323 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 324 #endif 325 326 #undef CONFIG_CLOCKS_IN_MHZ 327 328 /* 329 * Memory map 330 * 331 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 332 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 333 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 334 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable 335 * (early boot only) 336 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 337 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 338 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 339 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 340 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 341 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 342 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 343 */ 344 345 346 /* 347 * Local Bus Definitions 348 */ 349 #if defined(CONFIG_P1020MBG) 350 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 351 #define CONFIG_SYS_FLASH_BASE 0xec000000 352 #elif defined(CONFIG_P1020UTM) 353 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 354 #define CONFIG_SYS_FLASH_BASE 0xee000000 355 #else 356 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 357 #define CONFIG_SYS_FLASH_BASE 0xef000000 358 #endif 359 360 361 #ifdef CONFIG_PHYS_64BIT 362 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 363 #else 364 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 365 #endif 366 367 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 368 | BR_PS_16 | BR_V) 369 370 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 371 372 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 373 #define CONFIG_SYS_FLASH_QUIET_TEST 374 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 375 376 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 377 378 #undef CONFIG_SYS_FLASH_CHECKSUM 379 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 380 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 381 382 #define CONFIG_FLASH_CFI_DRIVER 383 #define CONFIG_SYS_FLASH_CFI 384 #define CONFIG_SYS_FLASH_EMPTY_INFO 385 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 386 387 /* Nand Flash */ 388 #ifdef CONFIG_NAND_FSL_ELBC 389 #define CONFIG_SYS_NAND_BASE 0xff800000 390 #ifdef CONFIG_PHYS_64BIT 391 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 392 #else 393 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 394 #endif 395 396 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 397 #define CONFIG_SYS_MAX_NAND_DEVICE 1 398 #define CONFIG_MTD_NAND_VERIFY_WRITE 399 #define CONFIG_CMD_NAND 400 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 401 402 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 403 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 404 | BR_PS_8 /* Port Size = 8 bit */ \ 405 | BR_MS_FCM /* MSEL = FCM */ \ 406 | BR_V) /* valid */ 407 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 408 | OR_FCM_CSCT \ 409 | OR_FCM_CST \ 410 | OR_FCM_CHT \ 411 | OR_FCM_SCY_1 \ 412 | OR_FCM_TRLX \ 413 | OR_FCM_EHTR) 414 #endif /* CONFIG_NAND_FSL_ELBC */ 415 416 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 417 418 #define CONFIG_SYS_INIT_RAM_LOCK 419 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 420 #ifdef CONFIG_PHYS_64BIT 421 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 422 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 423 /* The assembler doesn't like typecast */ 424 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 425 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 426 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 427 #else 428 /* Initial L1 address */ 429 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 430 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 431 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 432 #endif 433 /* Size of used area in RAM */ 434 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 435 436 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 437 GENERATED_GBL_DATA_SIZE) 438 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 439 440 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */ 441 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 442 443 #define CONFIG_SYS_CPLD_BASE 0xffa00000 444 #ifdef CONFIG_PHYS_64BIT 445 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 446 #else 447 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 448 #endif 449 /* CPLD config size: 1Mb */ 450 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 451 BR_PS_8 | BR_V) 452 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 453 454 #define CONFIG_SYS_PMC_BASE 0xff980000 455 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 456 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 457 BR_PS_8 | BR_V) 458 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 459 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 460 OR_GPCM_EAD) 461 462 #ifdef CONFIG_NAND 463 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 464 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 465 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 466 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 467 #else 468 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 469 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 470 #ifdef CONFIG_NAND_FSL_ELBC 471 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 472 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 473 #endif 474 #endif 475 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 476 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 477 478 479 /* Vsc7385 switch */ 480 #ifdef CONFIG_VSC7385_ENET 481 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 482 483 #ifdef CONFIG_PHYS_64BIT 484 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 485 #else 486 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 487 #endif 488 489 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 490 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 491 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 492 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 493 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 494 495 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 496 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 497 498 /* The size of the VSC7385 firmware image */ 499 #define CONFIG_VSC7385_IMAGE_SIZE 8192 500 #endif 501 502 /* Serial Port - controlled on board with jumper J8 503 * open - index 2 504 * shorted - index 1 505 */ 506 #define CONFIG_CONS_INDEX 1 507 #undef CONFIG_SERIAL_SOFTWARE_FIFO 508 #define CONFIG_SYS_NS16550 509 #define CONFIG_SYS_NS16550_SERIAL 510 #define CONFIG_SYS_NS16550_REG_SIZE 1 511 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 512 #ifdef CONFIG_SPL_BUILD 513 #define CONFIG_NS16550_MIN_FUNCTIONS 514 #endif 515 516 #define CONFIG_SYS_BAUDRATE_TABLE \ 517 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 518 519 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 520 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 521 522 /* Use the HUSH parser */ 523 #define CONFIG_SYS_HUSH_PARSER 524 525 /* 526 * Pass open firmware flat tree 527 */ 528 #define CONFIG_OF_LIBFDT 529 #define CONFIG_OF_BOARD_SETUP 530 #define CONFIG_OF_STDOUT_VIA_ALIAS 531 532 /* new uImage format support */ 533 #define CONFIG_FIT 534 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 535 536 /* I2C */ 537 #define CONFIG_SYS_I2C 538 #define CONFIG_SYS_I2C_FSL 539 #define CONFIG_SYS_FSL_I2C_SPEED 400000 540 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 541 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 542 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 543 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 544 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 545 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 546 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 547 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 548 549 /* 550 * I2C2 EEPROM 551 */ 552 #undef CONFIG_ID_EEPROM 553 554 #define CONFIG_RTC_PT7C4338 555 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 556 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 557 558 /* enable read and write access to EEPROM */ 559 #define CONFIG_CMD_EEPROM 560 #define CONFIG_SYS_I2C_MULTI_EEPROMS 561 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 562 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 563 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 564 565 /* 566 * eSPI - Enhanced SPI 567 */ 568 #define CONFIG_HARD_SPI 569 #define CONFIG_FSL_ESPI 570 571 #if defined(CONFIG_SPI_FLASH) 572 #define CONFIG_SPI_FLASH_SPANSION 573 #define CONFIG_CMD_SF 574 #define CONFIG_SF_DEFAULT_SPEED 10000000 575 #define CONFIG_SF_DEFAULT_MODE 0 576 #endif 577 578 #if defined(CONFIG_PCI) 579 /* 580 * General PCI 581 * Memory space is mapped 1-1, but I/O space must start from 0. 582 */ 583 584 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 585 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 586 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 587 #ifdef CONFIG_PHYS_64BIT 588 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 589 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 590 #else 591 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 592 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 593 #endif 594 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 595 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 596 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 597 #ifdef CONFIG_PHYS_64BIT 598 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 599 #else 600 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 601 #endif 602 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 603 604 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 605 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 606 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 607 #ifdef CONFIG_PHYS_64BIT 608 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 609 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 610 #else 611 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 612 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 613 #endif 614 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 615 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 616 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 617 #ifdef CONFIG_PHYS_64BIT 618 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 619 #else 620 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 621 #endif 622 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 623 624 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 625 #define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/ 626 #define CONFIG_CMD_PCI 627 #define CONFIG_CMD_NET 628 629 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 630 #define CONFIG_DOS_PARTITION 631 #endif /* CONFIG_PCI */ 632 633 #if defined(CONFIG_TSEC_ENET) 634 #define CONFIG_MII /* MII PHY management */ 635 #define CONFIG_TSEC1 636 #define CONFIG_TSEC1_NAME "eTSEC1" 637 #define CONFIG_TSEC2 638 #define CONFIG_TSEC2_NAME "eTSEC2" 639 #define CONFIG_TSEC3 640 #define CONFIG_TSEC3_NAME "eTSEC3" 641 642 #define TSEC1_PHY_ADDR 2 643 #define TSEC2_PHY_ADDR 0 644 #define TSEC3_PHY_ADDR 1 645 646 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 647 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 648 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 649 650 #define TSEC1_PHYIDX 0 651 #define TSEC2_PHYIDX 0 652 #define TSEC3_PHYIDX 0 653 654 #define CONFIG_ETHPRIME "eTSEC1" 655 656 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 657 658 #define CONFIG_HAS_ETH0 659 #define CONFIG_HAS_ETH1 660 #define CONFIG_HAS_ETH2 661 #endif /* CONFIG_TSEC_ENET */ 662 663 #ifdef CONFIG_QE 664 /* QE microcode/firmware address */ 665 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 666 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec0000 667 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 668 #endif /* CONFIG_QE */ 669 670 #ifdef CONFIG_P1025RDB 671 /* 672 * QE UEC ethernet configuration 673 */ 674 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 675 676 #undef CONFIG_UEC_ETH 677 #define CONFIG_PHY_MODE_NEED_CHANGE 678 679 #define CONFIG_UEC_ETH1 /* ETH1 */ 680 #define CONFIG_HAS_ETH0 681 682 #ifdef CONFIG_UEC_ETH1 683 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 684 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 685 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 686 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 687 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 688 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 689 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 690 #endif /* CONFIG_UEC_ETH1 */ 691 692 #define CONFIG_UEC_ETH5 /* ETH5 */ 693 #define CONFIG_HAS_ETH1 694 695 #ifdef CONFIG_UEC_ETH5 696 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 697 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 698 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 699 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 700 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 701 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 702 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 703 #endif /* CONFIG_UEC_ETH5 */ 704 #endif /* CONFIG_P1025RDB */ 705 706 /* 707 * Environment 708 */ 709 #ifdef CONFIG_RAMBOOT_SPIFLASH 710 #define CONFIG_ENV_IS_IN_SPI_FLASH 711 #define CONFIG_ENV_SPI_BUS 0 712 #define CONFIG_ENV_SPI_CS 0 713 #define CONFIG_ENV_SPI_MAX_HZ 10000000 714 #define CONFIG_ENV_SPI_MODE 0 715 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 716 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 717 #define CONFIG_ENV_SECT_SIZE 0x10000 718 #elif defined(CONFIG_RAMBOOT_SDCARD) 719 #define CONFIG_ENV_IS_IN_MMC 720 #define CONFIG_FSL_FIXED_MMC_LOCATION 721 #define CONFIG_ENV_SIZE 0x2000 722 #define CONFIG_SYS_MMC_ENV_DEV 0 723 #elif defined(CONFIG_NAND) 724 #define CONFIG_ENV_IS_IN_NAND 725 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 726 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 727 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 728 #elif defined(CONFIG_SYS_RAMBOOT) 729 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 730 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 731 #define CONFIG_ENV_SIZE 0x2000 732 #else 733 #define CONFIG_ENV_IS_IN_FLASH 734 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 735 #define CONFIG_ENV_ADDR 0xfff80000 736 #else 737 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 738 #endif 739 #define CONFIG_ENV_SIZE 0x2000 740 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 741 #endif 742 743 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 744 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 745 746 /* 747 * Command line configuration. 748 */ 749 #include <config_cmd_default.h> 750 751 #define CONFIG_CMD_IRQ 752 #define CONFIG_CMD_PING 753 #define CONFIG_CMD_I2C 754 #define CONFIG_CMD_MII 755 #define CONFIG_CMD_DATE 756 #define CONFIG_CMD_ELF 757 #define CONFIG_CMD_SETEXPR 758 #define CONFIG_CMD_REGINFO 759 760 /* 761 * USB 762 */ 763 #define CONFIG_HAS_FSL_DR_USB 764 765 #if defined(CONFIG_HAS_FSL_DR_USB) 766 #define CONFIG_USB_EHCI 767 768 #ifdef CONFIG_USB_EHCI 769 #define CONFIG_CMD_USB 770 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 771 #define CONFIG_USB_EHCI_FSL 772 #define CONFIG_USB_STORAGE 773 #endif 774 #endif 775 776 #define CONFIG_MMC 777 778 #ifdef CONFIG_MMC 779 #define CONFIG_FSL_ESDHC 780 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 781 #define CONFIG_CMD_MMC 782 #define CONFIG_GENERIC_MMC 783 #endif 784 785 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ 786 || defined(CONFIG_FSL_SATA) 787 #define CONFIG_CMD_EXT2 788 #define CONFIG_CMD_FAT 789 #define CONFIG_DOS_PARTITION 790 #endif 791 792 #undef CONFIG_WATCHDOG /* watchdog disabled */ 793 794 /* 795 * Miscellaneous configurable options 796 */ 797 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 798 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 799 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 800 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 801 #if defined(CONFIG_CMD_KGDB) 802 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 803 #else 804 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 805 #endif 806 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 807 /* Print Buffer Size */ 808 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 809 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 810 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ 811 812 /* 813 * For booting Linux, the board info and command line data 814 * have to be in the first 64 MB of memory, since this is 815 * the maximum mapped by the Linux kernel during initialization. 816 */ 817 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 818 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 819 820 #if defined(CONFIG_CMD_KGDB) 821 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 822 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 823 #endif 824 825 /* 826 * Environment Configuration 827 */ 828 #define CONFIG_HOSTNAME unknown 829 #define CONFIG_ROOTPATH "/opt/nfsroot" 830 #define CONFIG_BOOTFILE "uImage" 831 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 832 833 /* default location for tftp and bootm */ 834 #define CONFIG_LOADADDR 1000000 835 836 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 837 #define CONFIG_BOOTARGS /* the boot command will set bootargs */ 838 839 #define CONFIG_BAUDRATE 115200 840 841 #ifdef __SW_BOOT_NOR 842 #define __NOR_RST_CMD \ 843 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 844 i2c mw 18 3 __SW_BOOT_MASK 1; reset 845 #endif 846 #ifdef __SW_BOOT_SPI 847 #define __SPI_RST_CMD \ 848 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 849 i2c mw 18 3 __SW_BOOT_MASK 1; reset 850 #endif 851 #ifdef __SW_BOOT_SD 852 #define __SD_RST_CMD \ 853 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 854 i2c mw 18 3 __SW_BOOT_MASK 1; reset 855 #endif 856 #ifdef __SW_BOOT_NAND 857 #define __NAND_RST_CMD \ 858 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 859 i2c mw 18 3 __SW_BOOT_MASK 1; reset 860 #endif 861 #ifdef __SW_BOOT_PCIE 862 #define __PCIE_RST_CMD \ 863 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 864 i2c mw 18 3 __SW_BOOT_MASK 1; reset 865 #endif 866 867 #define CONFIG_EXTRA_ENV_SETTINGS \ 868 "netdev=eth0\0" \ 869 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 870 "loadaddr=1000000\0" \ 871 "bootfile=uImage\0" \ 872 "tftpflash=tftpboot $loadaddr $uboot; " \ 873 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 874 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 875 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 876 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 877 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 878 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 879 "consoledev=ttyS0\0" \ 880 "ramdiskaddr=2000000\0" \ 881 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 882 "fdtaddr=c00000\0" \ 883 "bdev=sda1\0" \ 884 "jffs2nor=mtdblock3\0" \ 885 "norbootaddr=ef080000\0" \ 886 "norfdtaddr=ef040000\0" \ 887 "jffs2nand=mtdblock9\0" \ 888 "nandbootaddr=100000\0" \ 889 "nandfdtaddr=80000\0" \ 890 "ramdisk_size=120000\0" \ 891 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 892 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 893 __stringify(__NOR_RST_CMD)"\0" \ 894 __stringify(__SPI_RST_CMD)"\0" \ 895 __stringify(__SD_RST_CMD)"\0" \ 896 __stringify(__NAND_RST_CMD)"\0" \ 897 __stringify(__PCIE_RST_CMD)"\0" 898 899 #define CONFIG_NFSBOOTCOMMAND \ 900 "setenv bootargs root=/dev/nfs rw " \ 901 "nfsroot=$serverip:$rootpath " \ 902 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 903 "console=$consoledev,$baudrate $othbootargs;" \ 904 "tftp $loadaddr $bootfile;" \ 905 "tftp $fdtaddr $fdtfile;" \ 906 "bootm $loadaddr - $fdtaddr" 907 908 #define CONFIG_HDBOOT \ 909 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 910 "console=$consoledev,$baudrate $othbootargs;" \ 911 "usb start;" \ 912 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 913 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 914 "bootm $loadaddr - $fdtaddr" 915 916 #define CONFIG_USB_FAT_BOOT \ 917 "setenv bootargs root=/dev/ram rw " \ 918 "console=$consoledev,$baudrate $othbootargs " \ 919 "ramdisk_size=$ramdisk_size;" \ 920 "usb start;" \ 921 "fatload usb 0:2 $loadaddr $bootfile;" \ 922 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 923 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 924 "bootm $loadaddr $ramdiskaddr $fdtaddr" 925 926 #define CONFIG_USB_EXT2_BOOT \ 927 "setenv bootargs root=/dev/ram rw " \ 928 "console=$consoledev,$baudrate $othbootargs " \ 929 "ramdisk_size=$ramdisk_size;" \ 930 "usb start;" \ 931 "ext2load usb 0:4 $loadaddr $bootfile;" \ 932 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 933 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 934 "bootm $loadaddr $ramdiskaddr $fdtaddr" 935 936 #define CONFIG_NORBOOT \ 937 "setenv bootargs root=/dev/$jffs2nor rw " \ 938 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 939 "bootm $norbootaddr - $norfdtaddr" 940 941 #define CONFIG_RAMBOOTCOMMAND \ 942 "setenv bootargs root=/dev/ram rw " \ 943 "console=$consoledev,$baudrate $othbootargs " \ 944 "ramdisk_size=$ramdisk_size;" \ 945 "tftp $ramdiskaddr $ramdiskfile;" \ 946 "tftp $loadaddr $bootfile;" \ 947 "tftp $fdtaddr $fdtfile;" \ 948 "bootm $loadaddr $ramdiskaddr $fdtaddr" 949 950 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 951 952 #endif /* __CONFIG_H */ 953