1 /* 2 * Copyright 2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_LS102XA 11 12 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR 13 14 #define CONFIG_SYS_FSL_CLK 15 16 /* 17 * Size of malloc() pool 18 */ 19 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 20 21 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 22 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 23 24 /* XHCI Support - enabled by default */ 25 #define CONFIG_HAS_FSL_XHCI_USB 26 27 #ifdef CONFIG_HAS_FSL_XHCI_USB 28 #define CONFIG_USB_XHCI_FSL 29 #define CONFIG_USB_XHCI_DWC3 30 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 31 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 32 #endif 33 34 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) 35 #define CONFIG_USB_STORAGE 36 #define CONFIG_CMD_EXT2 37 #endif 38 39 /* 40 * Generic Timer Definitions 41 */ 42 #define GENERIC_TIMER_CLK 12500000 43 44 #define CONFIG_SYS_CLK_FREQ 100000000 45 #define CONFIG_DDR_CLK_FREQ 100000000 46 47 /* 48 * DDR: 800 MHz ( 1600 MT/s data rate ) 49 */ 50 51 #define DDR_SDRAM_CFG 0x470c0008 52 #define DDR_CS0_BNDS 0x008000bf 53 #define DDR_CS0_CONFIG 0x80014302 54 #define DDR_TIMING_CFG_0 0x50550004 55 #define DDR_TIMING_CFG_1 0xbcb38c56 56 #define DDR_TIMING_CFG_2 0x0040d120 57 #define DDR_TIMING_CFG_3 0x010e1000 58 #define DDR_TIMING_CFG_4 0x00000001 59 #define DDR_TIMING_CFG_5 0x03401400 60 #define DDR_SDRAM_CFG_2 0x00401010 61 #define DDR_SDRAM_MODE 0x00061c60 62 #define DDR_SDRAM_MODE_2 0x00180000 63 #define DDR_SDRAM_INTERVAL 0x18600618 64 #define DDR_DDR_WRLVL_CNTL 0x8655f605 65 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 66 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 67 #define DDR_DDR_CDR1 0x80040000 68 #define DDR_DDR_CDR2 0x00000001 69 #define DDR_SDRAM_CLK_CNTL 0x02000000 70 #define DDR_DDR_ZQ_CNTL 0x89080600 71 #define DDR_CS0_CONFIG_2 0 72 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 73 #define SDRAM_CFG2_D_INIT 0x00000010 74 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 75 #define SDRAM_CFG2_FRC_SR 0x80000000 76 #define SDRAM_CFG_BI 0x00000001 77 78 #ifdef CONFIG_RAMBOOT_PBL 79 #define CONFIG_SYS_FSL_PBL_PBI \ 80 board/freescale/ls1021aiot/ls102xa_pbi.cfg 81 #endif 82 83 #ifdef CONFIG_SD_BOOT 84 #define CONFIG_SYS_FSL_PBL_RCW \ 85 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg 86 #define CONFIG_SPL_FRAMEWORK 87 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 88 #define CONFIG_SPL_LIBCOMMON_SUPPORT 89 #define CONFIG_SPL_LIBGENERIC_SUPPORT 90 #define CONFIG_SPL_ENV_SUPPORT 91 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 92 #define CONFIG_SPL_I2C_SUPPORT 93 #define CONFIG_SPL_WATCHDOG_SUPPORT 94 #define CONFIG_SPL_SERIAL_SUPPORT 95 #define CONFIG_SPL_MMC_SUPPORT 96 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 97 98 #define CONFIG_SPL_TEXT_BASE 0x10000000 99 #define CONFIG_SPL_MAX_SIZE 0x1a000 100 #define CONFIG_SPL_STACK 0x1001d000 101 #define CONFIG_SPL_PAD_TO 0x1c000 102 #define CONFIG_SYS_TEXT_BASE 0x82000000 103 104 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 105 CONFIG_SYS_MONITOR_LEN) 106 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 107 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 108 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 109 #define CONFIG_SYS_MONITOR_LEN 0x80000 110 #define CONFIG_SYS_NO_FLASH 111 #endif 112 113 #ifdef CONFIG_QSPI_BOOT 114 #define CONFIG_SYS_TEXT_BASE 0x40010000 115 #endif 116 117 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 118 #define CONFIG_SYS_NO_FLASH 119 #endif 120 121 #define CONFIG_NR_DRAM_BANKS 1 122 123 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 124 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 125 126 #define CONFIG_FSL_CAAM /* Enable CAAM */ 127 128 /* 129 * Serial Port 130 */ 131 #define CONFIG_CONS_INDEX 1 132 #define CONFIG_SYS_NS16550_SERIAL 133 #define CONFIG_SYS_NS16550_REG_SIZE 1 134 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 135 #define CONFIG_BAUDRATE 115200 136 137 /* 138 * I2C 139 */ 140 #define CONFIG_CMD_I2C 141 #define CONFIG_SYS_I2C 142 #define CONFIG_SYS_I2C_MXC 143 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 144 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 145 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 146 147 /* EEPROM */ 148 #define CONFIG_ID_EEPROM 149 #define CONFIG_SYS_I2C_EEPROM_NXID 150 #define CONFIG_SYS_EEPROM_BUS_NUM 0 151 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 152 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 153 154 /* 155 * MMC 156 */ 157 #define CONFIG_CMD_MMC 158 #define CONFIG_FSL_ESDHC 159 #define CONFIG_GENERIC_MMC 160 161 /* SATA */ 162 #define CONFIG_CMD_SCSI 163 #define CONFIG_LIBATA 164 #define CONFIG_SCSI_AHCI 165 #define CONFIG_SCSI_AHCI_PLAT 166 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI 167 #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 168 #endif 169 #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ 170 PCI_DEVICE_ID_FREESCALE_AHCI} 171 172 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 173 #define CONFIG_SYS_SCSI_MAX_LUN 1 174 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 175 CONFIG_SYS_SCSI_MAX_LUN) 176 177 #define CONFIG_CMD_FAT 178 #define CONFIG_DOS_PARTITION 179 #define CONFIG_PARTITION_UUIDS 180 #define CONFIG_EFI_PARTITION 181 #define CONFIG_CMD_GPT 182 183 /* SPI */ 184 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 185 #define CONFIG_SPI_FLASH_SPANSION 186 187 /* QSPI */ 188 #define QSPI0_AMBA_BASE 0x40000000 189 #define FSL_QSPI_FLASH_SIZE (1 << 24) 190 #define FSL_QSPI_FLASH_NUM 2 191 #define CONFIG_SPI_FLASH_BAR 192 #define CONFIG_SPI_FLASH_SPANSION 193 #endif 194 195 /* DM SPI */ 196 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 197 #define CONFIG_CMD_SF 198 #define CONFIG_DM_SPI_FLASH 199 #endif 200 201 /* 202 * eTSEC 203 */ 204 #define CONFIG_TSEC_ENET 205 206 #ifdef CONFIG_TSEC_ENET 207 #define CONFIG_MII 208 #define CONFIG_MII_DEFAULT_TSEC 1 209 #define CONFIG_TSEC1 1 210 #define CONFIG_TSEC1_NAME "eTSEC1" 211 #define CONFIG_TSEC2 1 212 #define CONFIG_TSEC2_NAME "eTSEC2" 213 214 #define TSEC1_PHY_ADDR 1 215 #define TSEC2_PHY_ADDR 3 216 217 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 218 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 219 220 #define TSEC1_PHYIDX 0 221 #define TSEC2_PHYIDX 0 222 223 #define CONFIG_ETHPRIME "eTSEC2" 224 225 #define CONFIG_PHY_GIGE 226 #define CONFIG_PHYLIB 227 #define CONFIG_PHY_ATHEROS 228 229 #define CONFIG_HAS_ETH0 230 #define CONFIG_HAS_ETH1 231 #define CONFIG_HAS_ETH2 232 #endif 233 234 /* PCIe */ 235 #define CONFIG_PCIE1 /* PCIE controler 1 */ 236 #define CONFIG_PCIE2 /* PCIE controler 2 */ 237 238 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 239 240 #ifdef CONFIG_PCI 241 #define CONFIG_PCI_SCAN_SHOW 242 #define CONFIG_CMD_PCI 243 #endif 244 245 #define CONFIG_CMD_PING 246 #define CONFIG_CMD_DHCP 247 #define CONFIG_CMD_MII 248 249 #define CONFIG_CMDLINE_TAG 250 #define CONFIG_CMDLINE_EDITING 251 252 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT) 253 #undef CONFIG_CMD_IMLS 254 #endif 255 256 #define CONFIG_PEN_ADDR_BIG_ENDIAN 257 #define CONFIG_LAYERSCAPE_NS_ACCESS 258 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 259 #define CONFIG_TIMER_CLK_FREQ 12500000 260 261 #define CONFIG_HWCONFIG 262 #define HWCONFIG_BUFFER_SIZE 256 263 264 #define CONFIG_FSL_DEVICE_DISABLE 265 266 #define CONFIG_EXTRA_ENV_SETTINGS \ 267 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 268 "initrd_high=0xffffffff\0" \ 269 "fdt_high=0xffffffff\0" 270 271 /* 272 * Miscellaneous configurable options 273 */ 274 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 275 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 276 #define CONFIG_AUTO_COMPLETE 277 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 278 #define CONFIG_SYS_PBSIZE \ 279 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 280 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 281 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 282 283 #define CONFIG_CMD_GREPENV 284 #define CONFIG_CMD_MEMINFO 285 286 #define CONFIG_SYS_LOAD_ADDR 0x82000000 287 288 #define CONFIG_LS102XA_STREAM_ID 289 290 /* 291 * Stack sizes 292 * The stack sizes are set up in start.S using the settings below 293 */ 294 #define CONFIG_STACKSIZE (30 * 1024) 295 296 #define CONFIG_SYS_INIT_SP_OFFSET \ 297 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 298 #define CONFIG_SYS_INIT_SP_ADDR \ 299 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 300 301 #ifdef CONFIG_SPL_BUILD 302 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 303 #else 304 /* start of monitor */ 305 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 306 #endif 307 308 #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 309 310 /* 311 * Environment 312 */ 313 314 #define CONFIG_ENV_OVERWRITE 315 316 #if defined(CONFIG_SD_BOOT) 317 #define CONFIG_ENV_OFFSET 0x100000 318 #define CONFIG_ENV_IS_IN_MMC 319 #define CONFIG_SYS_MMC_ENV_DEV 0 320 #define CONFIG_ENV_SIZE 0x2000 321 #elif defined(CONFIG_QSPI_BOOT) 322 #define CONFIG_ENV_IS_IN_SPI_FLASH 323 #define CONFIG_ENV_SIZE 0x2000 324 #define CONFIG_ENV_OFFSET 0x100000 325 #define CONFIG_ENV_SECT_SIZE 0x10000 326 #endif 327 328 #define CONFIG_OF_BOARD_SETUP 329 #define CONFIG_OF_STDOUT_VIA_ALIAS 330 #define CONFIG_CMD_BOOTZ 331 332 #define CONFIG_MISC_INIT_R 333 334 /* Hash command with SHA acceleration supported in hardware */ 335 336 #ifdef CONFIG_FSL_CAAM 337 338 #define CONFIG_CMD_HASH 339 340 #define CONFIG_SHA_HW_ACCEL 341 342 #endif 343 344 #include <asm/fsl_secure_boot.h> 345 346 #endif 347