1 /* 2 * Copyright 2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_LS102XA 11 12 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR 13 14 #define CONFIG_SYS_FSL_CLK 15 16 /* 17 * Size of malloc() pool 18 */ 19 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 20 21 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 22 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 23 24 /* XHCI Support - enabled by default */ 25 #define CONFIG_HAS_FSL_XHCI_USB 26 27 #ifdef CONFIG_HAS_FSL_XHCI_USB 28 #define CONFIG_USB_XHCI_FSL 29 #define CONFIG_USB_XHCI_DWC3 30 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 31 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 32 #endif 33 34 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) 35 #define CONFIG_USB_STORAGE 36 #define CONFIG_CMD_EXT2 37 #endif 38 39 /* 40 * Generic Timer Definitions 41 */ 42 #define GENERIC_TIMER_CLK 12500000 43 44 #define CONFIG_SYS_CLK_FREQ 100000000 45 #define CONFIG_DDR_CLK_FREQ 100000000 46 47 /* 48 * DDR: 800 MHz ( 1600 MT/s data rate ) 49 */ 50 51 #define DDR_SDRAM_CFG 0x470c0008 52 #define DDR_CS0_BNDS 0x008000bf 53 #define DDR_CS0_CONFIG 0x80014302 54 #define DDR_TIMING_CFG_0 0x50550004 55 #define DDR_TIMING_CFG_1 0xbcb38c56 56 #define DDR_TIMING_CFG_2 0x0040d120 57 #define DDR_TIMING_CFG_3 0x010e1000 58 #define DDR_TIMING_CFG_4 0x00000001 59 #define DDR_TIMING_CFG_5 0x03401400 60 #define DDR_SDRAM_CFG_2 0x00401010 61 #define DDR_SDRAM_MODE 0x00061c60 62 #define DDR_SDRAM_MODE_2 0x00180000 63 #define DDR_SDRAM_INTERVAL 0x18600618 64 #define DDR_DDR_WRLVL_CNTL 0x8655f605 65 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 66 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 67 #define DDR_DDR_CDR1 0x80040000 68 #define DDR_DDR_CDR2 0x00000001 69 #define DDR_SDRAM_CLK_CNTL 0x02000000 70 #define DDR_DDR_ZQ_CNTL 0x89080600 71 #define DDR_CS0_CONFIG_2 0 72 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 73 #define SDRAM_CFG2_D_INIT 0x00000010 74 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 75 #define SDRAM_CFG2_FRC_SR 0x80000000 76 #define SDRAM_CFG_BI 0x00000001 77 78 #ifdef CONFIG_RAMBOOT_PBL 79 #define CONFIG_SYS_FSL_PBL_PBI \ 80 board/freescale/ls1021aiot/ls102xa_pbi.cfg 81 #endif 82 83 #ifdef CONFIG_SD_BOOT 84 #define CONFIG_SYS_FSL_PBL_RCW \ 85 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg 86 #define CONFIG_SPL_FRAMEWORK 87 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 88 #define CONFIG_SPL_LIBCOMMON_SUPPORT 89 #define CONFIG_SPL_LIBGENERIC_SUPPORT 90 #define CONFIG_SPL_ENV_SUPPORT 91 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 92 #define CONFIG_SPL_I2C_SUPPORT 93 #define CONFIG_SPL_WATCHDOG_SUPPORT 94 #define CONFIG_SPL_SERIAL_SUPPORT 95 #define CONFIG_SPL_MMC_SUPPORT 96 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 97 98 #define CONFIG_SPL_TEXT_BASE 0x10000000 99 #define CONFIG_SPL_MAX_SIZE 0x1a000 100 #define CONFIG_SPL_STACK 0x1001d000 101 #define CONFIG_SPL_PAD_TO 0x1c000 102 #define CONFIG_SYS_TEXT_BASE 0x82000000 103 104 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 105 CONFIG_SYS_MONITOR_LEN) 106 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 107 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 108 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 109 #define CONFIG_SYS_MONITOR_LEN 0x80000 110 #define CONFIG_SYS_NO_FLASH 111 #endif 112 113 #ifdef CONFIG_QSPI_BOOT 114 #define CONFIG_SYS_TEXT_BASE 0x40010000 115 #endif 116 117 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 118 #define CONFIG_SYS_NO_FLASH 119 #endif 120 121 #define CONFIG_NR_DRAM_BANKS 1 122 123 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 124 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 125 126 #define CONFIG_FSL_CAAM /* Enable CAAM */ 127 128 /* 129 * Serial Port 130 */ 131 #define CONFIG_CONS_INDEX 1 132 #define CONFIG_SYS_NS16550_SERIAL 133 #define CONFIG_SYS_NS16550_REG_SIZE 1 134 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 135 #define CONFIG_BAUDRATE 115200 136 137 /* 138 * I2C 139 */ 140 #define CONFIG_CMD_I2C 141 #define CONFIG_SYS_I2C 142 #define CONFIG_SYS_I2C_MXC 143 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 144 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 145 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 146 147 /* EEPROM */ 148 #define CONFIG_ID_EEPROM 149 #define CONFIG_SYS_I2C_EEPROM_NXID 150 #define CONFIG_SYS_EEPROM_BUS_NUM 0 151 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 152 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 153 154 /* 155 * MMC 156 */ 157 #define CONFIG_CMD_MMC 158 #define CONFIG_FSL_ESDHC 159 160 /* SATA */ 161 #define CONFIG_CMD_SCSI 162 #define CONFIG_LIBATA 163 #define CONFIG_SCSI_AHCI 164 #define CONFIG_SCSI_AHCI_PLAT 165 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI 166 #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 167 #endif 168 #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ 169 PCI_DEVICE_ID_FREESCALE_AHCI} 170 171 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 172 #define CONFIG_SYS_SCSI_MAX_LUN 1 173 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 174 CONFIG_SYS_SCSI_MAX_LUN) 175 176 #define CONFIG_CMD_FAT 177 178 /* SPI */ 179 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 180 #define CONFIG_SPI_FLASH_SPANSION 181 182 /* QSPI */ 183 #define QSPI0_AMBA_BASE 0x40000000 184 #define FSL_QSPI_FLASH_SIZE (1 << 24) 185 #define FSL_QSPI_FLASH_NUM 2 186 #define CONFIG_SPI_FLASH_BAR 187 #define CONFIG_SPI_FLASH_SPANSION 188 #endif 189 190 /* DM SPI */ 191 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 192 #define CONFIG_CMD_SF 193 #define CONFIG_DM_SPI_FLASH 194 #endif 195 196 /* 197 * eTSEC 198 */ 199 #define CONFIG_TSEC_ENET 200 201 #ifdef CONFIG_TSEC_ENET 202 #define CONFIG_MII 203 #define CONFIG_MII_DEFAULT_TSEC 1 204 #define CONFIG_TSEC1 1 205 #define CONFIG_TSEC1_NAME "eTSEC1" 206 #define CONFIG_TSEC2 1 207 #define CONFIG_TSEC2_NAME "eTSEC2" 208 209 #define TSEC1_PHY_ADDR 1 210 #define TSEC2_PHY_ADDR 3 211 212 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 213 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 214 215 #define TSEC1_PHYIDX 0 216 #define TSEC2_PHYIDX 0 217 218 #define CONFIG_ETHPRIME "eTSEC2" 219 220 #define CONFIG_PHY_GIGE 221 #define CONFIG_PHYLIB 222 #define CONFIG_PHY_ATHEROS 223 224 #define CONFIG_HAS_ETH0 225 #define CONFIG_HAS_ETH1 226 #define CONFIG_HAS_ETH2 227 #endif 228 229 /* PCIe */ 230 #define CONFIG_PCIE1 /* PCIE controler 1 */ 231 #define CONFIG_PCIE2 /* PCIE controler 2 */ 232 233 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 234 235 #ifdef CONFIG_PCI 236 #define CONFIG_PCI_SCAN_SHOW 237 #define CONFIG_CMD_PCI 238 #endif 239 240 #define CONFIG_CMD_PING 241 #define CONFIG_CMD_DHCP 242 #define CONFIG_CMD_MII 243 244 #define CONFIG_CMDLINE_TAG 245 #define CONFIG_CMDLINE_EDITING 246 247 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT) 248 #undef CONFIG_CMD_IMLS 249 #endif 250 251 #define CONFIG_PEN_ADDR_BIG_ENDIAN 252 #define CONFIG_LAYERSCAPE_NS_ACCESS 253 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 254 #define CONFIG_TIMER_CLK_FREQ 12500000 255 256 #define CONFIG_HWCONFIG 257 #define HWCONFIG_BUFFER_SIZE 256 258 259 #define CONFIG_FSL_DEVICE_DISABLE 260 261 #define CONFIG_EXTRA_ENV_SETTINGS \ 262 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 263 "initrd_high=0xffffffff\0" \ 264 "fdt_high=0xffffffff\0" 265 266 /* 267 * Miscellaneous configurable options 268 */ 269 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 270 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 271 #define CONFIG_AUTO_COMPLETE 272 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 273 #define CONFIG_SYS_PBSIZE \ 274 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 275 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 276 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 277 278 #define CONFIG_CMD_GREPENV 279 #define CONFIG_CMD_MEMINFO 280 281 #define CONFIG_SYS_LOAD_ADDR 0x82000000 282 283 #define CONFIG_LS102XA_STREAM_ID 284 285 /* 286 * Stack sizes 287 * The stack sizes are set up in start.S using the settings below 288 */ 289 #define CONFIG_STACKSIZE (30 * 1024) 290 291 #define CONFIG_SYS_INIT_SP_OFFSET \ 292 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 293 #define CONFIG_SYS_INIT_SP_ADDR \ 294 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 295 296 #ifdef CONFIG_SPL_BUILD 297 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 298 #else 299 /* start of monitor */ 300 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 301 #endif 302 303 #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 304 305 /* 306 * Environment 307 */ 308 309 #define CONFIG_ENV_OVERWRITE 310 311 #if defined(CONFIG_SD_BOOT) 312 #define CONFIG_ENV_OFFSET 0x100000 313 #define CONFIG_ENV_IS_IN_MMC 314 #define CONFIG_SYS_MMC_ENV_DEV 0 315 #define CONFIG_ENV_SIZE 0x2000 316 #elif defined(CONFIG_QSPI_BOOT) 317 #define CONFIG_ENV_IS_IN_SPI_FLASH 318 #define CONFIG_ENV_SIZE 0x2000 319 #define CONFIG_ENV_OFFSET 0x100000 320 #define CONFIG_ENV_SECT_SIZE 0x10000 321 #endif 322 323 #define CONFIG_OF_BOARD_SETUP 324 #define CONFIG_OF_STDOUT_VIA_ALIAS 325 #define CONFIG_CMD_BOOTZ 326 327 #define CONFIG_MISC_INIT_R 328 329 /* Hash command with SHA acceleration supported in hardware */ 330 331 #ifdef CONFIG_FSL_CAAM 332 333 #define CONFIG_CMD_HASH 334 335 #define CONFIG_SHA_HW_ACCEL 336 337 #endif 338 339 #include <asm/fsl_secure_boot.h> 340 341 #endif 342