1 /* 2 * Copyright 2010-2011 Calxeda, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_SYS_DCACHE_OFF 11 #define CONFIG_L2_OFF 12 #define CONFIG_SYS_THUMB_BUILD 13 14 #define CONFIG_SYS_NO_FLASH 15 #define CFG_HZ 1000 16 #define CONFIG_SYS_HZ CFG_HZ 17 18 #define CONFIG_OF_LIBFDT 19 #define CONFIG_OF_BOARD_SETUP 20 #define CONFIG_FIT 21 #define CONFIG_SUPPORT_RAW_INITRD 22 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) 23 24 /* 25 * Size of malloc() pool 26 */ 27 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) 28 29 #define CONFIG_PL011_SERIAL 30 #define CONFIG_PL011_CLOCK 150000000 31 #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } 32 #define CONFIG_CONS_INDEX 0 33 34 #define CONFIG_BAUDRATE 115200 35 36 #define CONFIG_BOOTCOUNT_LIMIT 37 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD 38 #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ 39 #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c 40 41 #define CONFIG_MISC_INIT_R 42 #define CONFIG_LIBATA 43 #define CONFIG_SCSI_AHCI 44 #define CONFIG_SCSI_AHCI_PLAT 45 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 46 #define CONFIG_SYS_SCSI_MAX_LUN 1 47 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 48 CONFIG_SYS_SCSI_MAX_LUN) 49 50 #define CONFIG_DOS_PARTITION 51 #define CONFIG_EFI_PARTITION 52 53 #define CONFIG_CALXEDA_XGMAC 54 55 /* PXE support */ 56 #define CONFIG_BOOTP_PXE 57 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 58 #define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank" 59 60 /* 61 * Command line configuration. 62 */ 63 #include <config_cmd_default.h> 64 65 #define CONFIG_CMD_BDI 66 #define CONFIG_CMD_BOOTZ 67 #define CONFIG_CMD_DHCP 68 #define CONFIG_CMD_ELF 69 #define CONFIG_CMD_MEMORY 70 #define CONFIG_CMD_LOADS 71 #define CONFIG_CMD_SCSI 72 #define CONFIG_CMD_EXT2 73 #define CONFIG_CMD_EXT4 74 #define CONFIG_CMD_FAT 75 #define CONFIG_CMD_PXE 76 #define CONFIG_MENU 77 78 #define CONFIG_BOOTDELAY 2 79 #define CONFIG_BOOT_RETRY_TIME -1 80 #define CONFIG_RESET_TO_RETRY 81 #define CONFIG_AUTOBOOT_KEYED 82 #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay 83 84 /* 85 * Miscellaneous configurable options 86 */ 87 #define CONFIG_CMDLINE_EDITING 88 #define CONFIG_AUTO_COMPLETE 89 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 90 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 91 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 92 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 93 #define CONFIG_SYS_PROMPT "Highbank #" 94 #define CONFIG_SYS_HUSH_PARSER 95 /* Print Buffer Size */ 96 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 97 sizeof(CONFIG_SYS_PROMPT)+16) 98 99 #define CONFIG_SYS_LOAD_ADDR 0x800000 100 #define CONFIG_SYS_64BIT_LBA 101 102 103 /*----------------------------------------------------------------------- 104 * Physical Memory Map 105 */ 106 #define CONFIG_NR_DRAM_BANKS 1 107 #define PHYS_SDRAM_1_SIZE (4089 << 20) 108 #define CONFIG_SYS_MEMTEST_START 0x100000 109 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000) 110 111 /* Environment data setup 112 */ 113 #define CONFIG_ENV_IS_IN_NVRAM 114 #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */ 115 #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ 116 #define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */ 117 #define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR 118 119 #define CONFIG_SYS_SDRAM_BASE 0x00000000 120 #define CONFIG_SYS_TEXT_BASE 0x00008000 121 #define CONFIG_SYS_INIT_SP_ADDR 0x01000000 122 #define CONFIG_SKIP_LOWLEVEL_INIT 123 124 #endif 125