1 /* 2 * (C) Copyright 2014 3 * Texas Instruments Incorporated. 4 * Felipe Balbi <balbi@ti.com> 5 * 6 * Configuration settings for the TI Beagle x15 board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_AM57XX_EVM_H 13 #define __CONFIG_AM57XX_EVM_H 14 15 #define CONFIG_AM57XX 16 17 #ifdef CONFIG_SPL_BUILD 18 #define CONFIG_IODELAY_RECALIBRATION 19 #endif 20 21 #define CONFIG_BOARD_EARLY_INIT_F 22 23 #define CONFIG_NR_DRAM_BANKS 2 24 25 #define CONFIG_ENV_SIZE (64 << 10) 26 #define CONFIG_ENV_IS_IN_FAT 27 #define FAT_ENV_INTERFACE "mmc" 28 #define FAT_ENV_DEVICE_AND_PART "0:1" 29 #define FAT_ENV_FILE "uboot.env" 30 31 #define CONSOLEDEV "ttyO2" 32 #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ 33 #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ 34 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 35 #define CONFIG_BAUDRATE 115200 36 37 #define CONFIG_SYS_OMAP_ABE_SYSCK 38 39 /* Define the default GPT table for eMMC */ 40 #define PARTS_DEFAULT \ 41 "uuid_disk=${uuid_gpt_disk};" \ 42 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" 43 44 #include <configs/ti_omap5_common.h> 45 46 /* Enhance our eMMC support / experience. */ 47 #define CONFIG_CMD_GPT 48 #define CONFIG_EFI_PARTITION 49 50 /* CPSW Ethernet */ 51 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 52 #define CONFIG_BOOTP_DNS2 53 #define CONFIG_BOOTP_SEND_HOSTNAME 54 #define CONFIG_BOOTP_GATEWAY 55 #define CONFIG_BOOTP_SUBNETMASK 56 #define CONFIG_NET_RETRY_COUNT 10 57 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 58 #define CONFIG_MII /* Required in net/eth.c */ 59 #define CONFIG_PHY_GIGE /* per-board part of CPSW */ 60 #define CONFIG_PHYLIB 61 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ 62 63 #define CONFIG_SUPPORT_EMMC_BOOT 64 65 /* USB xHCI HOST */ 66 #define CONFIG_USB_HOST 67 #define CONFIG_USB_XHCI_OMAP 68 #define CONFIG_USB_STORAGE 69 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 70 71 #define CONFIG_OMAP_USB_PHY 72 #define CONFIG_OMAP_USB3PHY1_HOST 73 74 /* SATA */ 75 #define CONFIG_BOARD_LATE_INIT 76 #define CONFIG_SCSI 77 #define CONFIG_LIBATA 78 #define CONFIG_SCSI_AHCI 79 #define CONFIG_SCSI_AHCI_PLAT 80 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 81 #define CONFIG_SYS_SCSI_MAX_LUN 1 82 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 83 CONFIG_SYS_SCSI_MAX_LUN) 84 85 /* EEPROM */ 86 #define CONFIG_EEPROM_CHIP_ADDRESS 0x50 87 #define CONFIG_EEPROM_BUS_ADDRESS 0 88 89 /* 90 * Default to using SPI for environment, etc. 91 * 0x000000 - 0x040000 : QSPI.SPL (256KiB) 92 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) 93 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) 94 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) 95 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) 96 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) 97 * 0x9E0000 - 0x2000000 : USERLAND 98 */ 99 #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 100 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 101 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 102 103 #ifdef CONFIG_SPL_BUILD 104 #undef CONFIG_DM_SPI 105 #undef CONFIG_DM_SPI_FLASH 106 #undef CONFIG_SPL_MAX_SIZE 107 #define CONFIG_SPL_MAX_SIZE (256 << 10) /* 256 KiB */ 108 #endif 109 110 /* SPI SPL */ 111 #define CONFIG_SPL_SPI_SUPPORT 112 #define CONFIG_SPL_DMA_SUPPORT 113 #define CONFIG_TI_EDMA3 114 #define CONFIG_SPL_SPI_LOAD 115 #define CONFIG_SPL_SPI_FLASH_SUPPORT 116 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 117 118 /* SPI */ 119 #undef CONFIG_OMAP3_SPI 120 #define CONFIG_TI_SPI_MMAP 121 #define CONFIG_SF_DEFAULT_SPEED 76800000 122 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 123 #define CONFIG_QSPI_QUAD_SUPPORT 124 125 #endif /* __CONFIG_AM57XX_EVM_H */ 126